PUBLICATIONS BY OUR FACULTY IN JOURNALS AND CONFERENCES

2019-20

  1. Dr.V.Ezhilmaran , Dr.L. Vijayaraghavan, Dr.N.J. Vasa, Dr.S. Sivaramakrishnan published a paper titled Femtosecond laser assisted generation of micro-dimples on moly-chrome film for improving its tribology in International Journal of Precision Technology, Impact Factor=0.2200; Paper Online Link: https://www.inderscience.com/info/inarticle.php?artid=100909; DOI: 10.1504/IJPTECH.2019.10022595; Volume No: 8, Issue No: 3; PageNo: 261-278; ISSN: 1755-2079; ISBN: 1755-2079 on Jul-2019 (2019-20)
  2. Mr.I.Vimal kannan, Dr.R.Rajkumar published a paper titled Crashworthiness and comparative analysis of polygonal single and bi-tubular structures under axial loading – experiments and FE modelling in Caribbean Journal of Science, Impact Factor=0.2220; Paper Online Link: https://www.researchgate.net/publication/333103563_Crashworthiness_and_comparative_analysis_of_polygonal_single_and_bi-tubular_structures_under_axial_loading_-experiments_and_FE_modelling?_sg=X_SP45f23wJeayewzxgBS7INBX0NGiL-hSy3L4KVYVibjwZj1Xzsc1nffP2ydNzl_Z5MdtlNVfD3eA0 http://caribjsci.com/gallery/is2.42.pdf; DOI: -1; Volume No: 53, Issue No: 2; PageNo: 543-568; ISSN: 0008-6452; ISBN: on Jul-2019 (2019-20)
  3. Dr.R.Rajkumar, Mr.Gnana Prasanna N, Mr.Michael Raj F published a paper titled Influence of Processing Parameters on AA 6063/SiC (Black & Green) Composites in Wire EDM in Caribbean Journal of Science, Impact Factor=0.2220; Paper Online Link: https://www.researchgate.net/publication/334030852_Influence_of_Processing_Parameters_on_AA_6063SiC_Black_Green_Composites_in_Wire_EDM http://caribjsci.com/gallery/is2.150.pdf; DOI: -1; Volume No: 53, Issue No: 2; PageNo: 1966-1990; ISSN: 0008-6452; ISBN: on Jul-2019 (2019-20)
  4. Mr.P. V. Elumalai, Mr.Annamalai Kandhasamy, Mr.Arularasu Sivalingam, Mr.Appuraja Senthil Kumar, Mr.KrishnaMoorthy Ramalingam, Dr.B.Dhinesh published a paper titled Performance and emission reduction characteristics of cerium oxide nanoparticle-water emulsion biofuel in diesel engine with modified coated piston in Environmental Science and Pollution Research, Impact Factor=2.9140; Paper Online Link: https://link.springer.com/article/10.1007/s11356-019-05773-z; DOI: https://doi.org/10.1007/s10973-018-7948-6; Volume No: 26, Issue No: 26; PageNo: 27362-27371; ISSN: 0944-1344 ; ISBN: 1614-7499 on Jul-2019 (2019-20)
  5. Dr.A.Vasanthanathan, Dr.P.Nagaraj, Mr.B.Vignesh, Mr.P.Manoj Kumar, Mr.K.Aravinda Kannan published a paper titled On the Experimental and Finite Element Simulation of CFRP space capsule module under axial drop in Journal of Spacecraft Technology, Impact Factor=0.1400; Paper Online Link: https://www.isac.gov.in/publications/jst/index.jsp; DOI: Vol.30 No.1; Volume No: 30, Issue No: 1; PageNo: 29-42; ISSN: 0971-1600 ; ISBN: 0971-1600 on Jul-2019 (2019-20)
  6. Dr.J. Sunil, Dr.R.Maheswaran, Mr. R. Vettumperumal, Mr. Kishor Kumar Sadasivuni published a paper titled Experimental Investigation on the Thermal Properties of NiO-Nano?uid in Journal of Nanofluids, Impact Factor=1.7900; Paper Online Link: https://www.ingentaconnect.com/content/asp/jon/2019/00000008/00000007/art00020; DOI: https://doi.org/10.1166/jon.2019.1698; Volume No: 8, Issue No: 7; PageNo: 1373-1384; ISSN: 2169-432X; ISBN: .. on Jul-2019 (2019-20)
  7. Mrs.T. Pandiselvi, Dr.R.Maheswaran published a paper titled Efficient Framework for Identifying, Locating, Detecting and Classifying MRI Brain Tumor in MRI Images in Journal of Medical System, Impact Factor=2.4150; Paper Online Link: https://www.ncbi.nlm.nih.gov/pubmed/31111265; DOI: doi: 10.1007/s10916-019-1253-1.; Volume No: 48, Issue No: 3; PageNo: 189-194; ISSN: 0148-5598; ISBN: .. on Jul-2019 (2019-20)
  8. Mr.N.Vasiraja, Dr.P.Nagaraj published a paper titled The effect of material gradient on the static and dynamic response of layered functionally graded material plate using finite element method in Bulletin of the Polish Academy of Sciences: Technical Sciences, Impact Factor=1.3610; Paper Online Link: http://journals.pan.pl/bpasts/130176; DOI: 10.24425/bpasts.2019.130191; Volume No: 67, Issue No: 4; PageNo: 827-838; ISSN: ISSN 0239-7528; ISBN: ISSN 0239-7528 on Aug-2019 (2019-20)
  9. Mr.Tony Punnoose Valayil, Dr.Selladurai Velappan, Mr.L.Prakash published a paper titled Analysing the Kinematic Characteristics of Bennett Mechanisms and Its Networks for Usage in Forming Deployable Structures in Mechanika, Impact Factor=0.5290; Paper Online Link: file:///C:/Users/DELL/Downloads/22527-Article%20Text-76421-1-10-20190828.pdf; DOI: https://doi.org/10.5755/j01.mech.25.4.22527; Volume No: 25, Issue No: 4; PageNo: 269-275; ISSN: 1392-1207; ISBN: 2029-6983 on Aug-2019 (2019-20)
  10. Mr.J.Nagarajan, Dr.N.Bose, Mr.B.Venkatraman published a paper titled Optimization of used cooking oil methyl ester production using response surface methodology in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Impact Factor=0.8940; Paper Online Link: 10.1080/15567036.2018.1555633; DOI: https://doi.org/10.1080/15567036.2018.1555633; Volume No: 41, Issue No: 19; PageNo: 2313-2325; ISSN: 1556-7036 (Print) 1556-7230 ; ISBN: 1556-7036 (Print) 1556-7230 on Aug-2019 (2019-20)
  11. Dr.K.Jeyasubramanian, Ms.M.Muthuselvi , Dr.G.S.Hikku, Mr.E.Muthusankar published a paper titled Improving electrochemical performance of reduced graphene oxide by counteracting its aggregation through intercalation of nanoparticles in Journal of Colloid and Interface Science, Impact Factor=6.3610; Paper Online Link: https://www.sciencedirect.com/science/article/pii/S0021979719304680; DOI: 10.1016/j.jcis.2019.04.046; Volume No: 549, Issue No: 0; PageNo: 22-32; ISSN: 0021-9797; ISBN: 1095-7103 on Aug-2019 (2019-20)
  12. Mr.Jabinth J, Dr.N.Selvakumar published a paper titled Effect of vanadium on enhancing the mechanical and wear behaviour of copper by using stir casting technique in Materials Research Express, Impact Factor=1.4490; Paper Online Link: https://iopscience.iop.org/article/10.1088/2053-1591/ab2d83/pdf; DOI: 10.1088/2053-1591/ab2cff.; Volume No: 6, Issue No: 09; PageNo: 96531-96531; ISSN: -; ISBN: - on Sep-2019 (2019-20)
  13. Dr.S.Arivazhagan, Miss.Jasline Tracia J, Dr.N.Selvakumar published a paper titled Classification of steel microstructures using modified alternate local ternary pattern in Materials Research Express, Impact Factor=1.4490; Paper Online Link: https://iopscience.iop.org/article/10.1088/2053-1591/ab2d83/pdf; DOI: https://doi.org/10.1088/2053-1591/ab2d83; Volume No: 6, Issue No: 09; PageNo: 96539-96539; ISSN: -; ISBN: - on Sep-2019 (2019-20)
  14. Mr.Krishnamoorthy Ramalingam, Mr.Annamalai Kandhasamy, Dr.B.Dhinesh, Mr.Moulik Palani, Dr.Thiyagarajan Subramanian, Dr.Edwin Geo Varuvel published a paper titled Forcasting of an ANN model for predicting behaviour of diesel engine energised by a combination of two low viscous biofuels in Environmental Science and Pollution Research, Impact Factor=2.9140; Paper Online Link: https://link.springer.com/article/10.1007/s11356-019-06222-7; DOI: https://link.springer.com/article/10.1007/s11356-019-06222-7; Volume No: 1, Issue No: 1; PageNo: 1-12; ISSN: 0944-1344 ; ISBN: 1614-7499 on Sep-2019 (2019-20)
  15. Dr.S. Thiyagarajan, Mr.AnkitSonthalia, Dr.V.Edwin Geo, Dr.V.Karthickeyan, Dr.K.Nanthagopal, Dr.B.Dhinesh published a paper titled Effect of manifold injection of methanol/n-pentanol in safflower biodiesel fuelled CI engine in Fuel, Impact Factor=5.1200; Paper Online Link: https://doi.org/10.1016/j.fuel.2019.116378; DOI: https://doi.org/10.1016/j.fuel.2019.116378; Volume No: 261, Issue No: 1; PageNo: 116378-116387; ISSN: 0016-2361; ISBN: 0016-2361 on Oct-2019 (2019-20)
  16. Dr.B.Dhinesh, Mr.Inbanaathan Papla Venugopal , Dr.Karthikeyan Viswanathan published a paper titled Characteristics Investigation on Di Diesel Engine with Nano-Particles as an Additive in Lemon Grass Oil in SAE Technical Paper, Impact Factor=0.3000; Paper Online Link: https://www.sae.org/publications/technical-papers/content/2019-28-0081/; DOI: https://www.sae.org/publications/technical-papers/content/2019-28-0081/; Volume No: 1, Issue No: 1; PageNo: 1-8; ISSN: 0944-1344 ; ISBN: 1614-7499 on Oct-2019 (2019-20)
  17. Dr.B.Dhinesh, Mr.J.Anish Jafrin Thilak published a paper titled Performance Assessment of Pyramidal Lattice Core Sandwich Engine Hood for Pedestrian Safety in SAE Technical Paper, Impact Factor=0.3000; Paper Online Link: https://www.sae.org/publications/technical-papers/content/2019-28-0089/; DOI: 10.4271/2019-28-0089; Volume No: 2019-28-0089, Issue No: 1; PageNo: 1-6; ISSN: 0148-7191 ; ISBN: 0148-7191 on Oct-2019 (2019-20)
  18. Dr.M.K.Marichelvam, Mrs.M. Geetha, Dr.Ömür Tosun published a paper titled An improved particle swarm optimization algorithm to solve hybrid flowshop scheduling problems with the effect of human factors – A case study in Computers & Operations Research, Impact Factor=3.0020; Paper Online Link: https://www.sciencedirect.com/science/article/pii/S0305054819302540?dgcid=author#!; DOI: https://doi.org/10.1016/j.cor.2019.104812; Volume No: 114, Issue No: -1; PageNo: 1-8; ISSN: 0305-0548; ISBN: -- on Oct-2019 (2019-20)
  19. Mr.C.Bala Manikandan, Mr.P.Balamurugan, Mr.S.Lionel Beneston, Mr.S.Balamurugan published a paper titled Investigation of Thermal Shock Resistance of CeO 2 Coating on Titanium Alloy by Magnetron Sputtering in SAE Technical Paper, Impact Factor=-1.0000; Paper Online Link: https://www.sae.org/publications/technical-papers/content/2019-28-0103/; DOI: 10.4271/2019-28-0103; Volume No: 2019-28-0103 , Issue No: -1; PageNo: 1-9; ISSN: 0148-7191; ISBN: on Oct-2019 (2019-20)
  20. Dr.K.Jeyasubramanian, Mr.E. Muthusankar, Mr.G.S.Hikku, Dr.N.Selvakumar published a paper titled Improved Thermal and Fire Retardant Behavior of Polyvinyl Alcohol Matrix Using Nanocomposites in International Journal of Nanoscience, Impact Factor=0.5780; Paper Online Link: https://www.worldscientific.com/doi/abs/10.1142/S0219581X18500254; DOI: https://doi.org/10.1142/S0219581X18500254; Volume No: 0, Issue No: 0; PageNo: 1850025-1850025; ISSN: 0219-581; ISBN: 1793-5350 on Oct-2019 (2019-20)
  21. Mr.Raghav G R, Dr.Balaji A N, Dr.N.Selvakumar published a paper titled Effect of tungsten reinforcement on mechanical, tribological and corrosion behaviour of mechanically alloyed Co-25C Cermet nanocomposites in Materials Research Express, Impact Factor=1.4490; Paper Online Link: https://iopscience.iop.org/article/10.1088/2053-1591/ab4f0a; DOI: https://doi.org/10.1088/2053-1591/ab4f0a; Volume No: 6, Issue No: 66; PageNo: 11654-11654; ISSN: -; ISBN: - on Nov-2019 (2019-20)
  22. Dr.A.Azhagurajan, Mr.L.Prakash , Dr.K.Jeyasubramanian published a paper titled Prevention of Explosion Accidents by employing Boron instead of Aluminium in Flash Powder in Process Safety and Environmental Protection, Impact Factor=4.3840; Paper Online Link: https://www.sciencedirect.com/science/article/pii/S0957582019304240; DOI: https://doi.org/10.1016/j.psep.2019.09.014; Volume No: 131, Issue No: 1; PageNo: 160-168; ISSN: 0957-5820; ISBN: 0957-5820 on Nov-2019 (2019-20)

2018-19

  1. Mr.P.Ganesan, Dr.M.K.Marichelvam, Dr.G.D.Sivakumar published a paper titled A HYBRID JAYA ALGORITHM TO SOLVE FLEXIBLE JOB SHOP SCHEDULING BENCHMARK PROBLEMS in International Journal of Pure and Applied Mathematics, Impact Factor=-1.0000; Paper Online Link: http://www.acadpubl.eu/hub/2018-120-6/5/477.pdf; DOI: -1; Volume No: 120, Issue No: 6; PageNo: 6893-6904; ISSN: 1314-3395; ISBN: -- on Jul-2018 (2018-19)
  2. Mr.J.Thanikachalam, Mr.N.Vasiraja, Mr.Vignesh V published a paper titled Evaluation on Properties of Industrial Workers Safety Helmet Using Natural Hybrid Composite in SAE Technical Papers, Impact Factor=0.3600; Paper Online Link: https://www.sae.org/publications/technical-papers/content/2018-28-0049/; DOI: 10.4271/2018-28-0049; Volume No: 28, Issue No: 28; PageNo: 1-7; ISSN: 0148-7191; ISBN: 0148-7191 on Jul-2018 (2018-19)
  3. Mr.J.Nagarajan, Dr.N.Bose, Mr.Kevin John, Mr.Kathiresh, Mr.Jeffey Markus Solomon published a paper titled Preparation, characterization and effect of calcium carbonate and titanium dioxide nano additives on fuel properties of tire oil diesel blend in ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Impact Factor=0.5670; Paper Online Link: https://doi.org/10.1080/15567036.2018.1486919; DOI: https://doi.org/10.1080/15567036.2018.1486919; Volume No: 40, Issue No: 15; PageNo: 1798-1806; ISSN: 1556-7036; ISBN: on Jul-2018 (2018-19)
  4. Dr.R. Harichandran, Dr.N.Selvakumar published a paper titled Microstructure and mechanical characterization of (B4C+ h-BN)/Al hybrid nanocomposites processed by ultrasound assisted casting in International Journal of Mechanical Sciences, Impact Factor=3.5700; Paper Online Link: https://www.sciencedirect.com/science/article/pii/S002074031732283X; DOI: 10.1016/j.ijmecsci.2017.08.039; Volume No: 144, Issue No: 8; PageNo: 814-826; ISSN: 0020-7403; ISBN: 0020-7403 on Aug-2018 (2018-19)
  5. Dr.M.K.Marichelvam, Mrs.M.GEETHA published a paper titled A hybrid crow search algorithm to minimise the weighted sum of makespan and total flow time in a flow shop environment in International Journal of Computer Aided Engineering and Technology, Impact Factor=-1.0000; Paper Online Link: -1; DOI: -1; Volume No: 10, Issue No: 6; PageNo: 636-649; ISSN: 1757-2657; ISBN: -- on Aug-2018 (2018-19)
  6. Dr.M.Muhaidheen, Dr.S.Muralidharan, Mr.M.Anandhan published a paper titled ELECTRICAL SAFETY SYSTEM FOR INDUSTRY/RESIDENTIAL APPLICATIONS in International Journal of Mechanical Engineering and Technology (IJMET), Impact Factor=0.5000; Paper Online Link: http://www.iaeme.com/ijmet/issues.asp?JType=IJMET&VType=9&IType=9; DOI: 0; Volume No: 9, Issue No: 9; PageNo: 755-760; ISSN: 0976-6340; ISBN: http://www.iaeme.com/ijmet/iss on Sep-2018 (2018-19)
  7. Mr.S.Senthil Murugan published a paper titled Characterization and Heat Treatment of AA6061 with and without TiB2 in Characterization and Heat Treatment of AA6061 with and without TiB2, Impact Factor=0.0000; Paper Online Link: http://www.matjournals.in/index.php/JoRTM/article/view/2866/1962; DOI: nil; Volume No: 3, Issue No: 3; PageNo: 1-6; ISSN: nil; ISBN: nil on Sep-2018 (2018-19)
  8. Dr.M.K.Marichelvam, Dr.A.Azhagurajan published a paper titled Removal of mercury from effluent solution by using banana corm and neem leaves activated charcoal in Environmental Nanotechnology, Monitoring & Management, Impact Factor=-1.0000; Paper Online Link: https://www.sciencedirect.com/science/article/pii/S2215153218301065?via%3Dihub; DOI: https://doi.org/10.1016/j.enmm.2018.08.005; Volume No: 10, Issue No: -1; PageNo: 360-365; ISSN: 2215-1532; ISBN: -- on Sep-2018 (2018-19)
  9. Dr.N.Bose, Mr.J.Nagarajan, Mr.Aniruthan, Mr.Saran, Mr.Vigneshkumar published a paper titled Enhancing the oxidation stability of Mahua oil methyl ester with the addition of natural antioxidants in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Impact Factor=0.5550; Paper Online Link: https://www.tandfonline.com/doi/full/10.1080/15567036.2018.1454549; DOI: : https://doi.org/10.1080/15567036.2018.1504146; Volume No: 40, Issue No: 21; PageNo: 2572-2579; ISSN: 1556-7036; ISBN: 978-0-415-40168-5 on Sep-2018 (2018-19)
  10. Mr.R.Vigneswaran, Dr.Annamalai K, Dr.B.Dhinesh, Mr.R. KrishnaMoorthy published a paper titled Experimental investigation of unmodified diesel engine performance, combustion and emission with multipurpose additive along with water-in-diesel emulsion fuel in Energy Conversion and Management, Impact Factor=6.6377; Paper Online Link: https://www.sciencedirect.com/science/article/pii/S019689041830774X; DOI: https://doi.org/10.1016/j.enconman.2018.07.039; Volume No: 172, Issue No: 1; PageNo: 370-380; ISSN: 0196-8904; ISBN: 0196-8904 on Sep-2018 (2018-19)
  11. Dr.B.Dhinesh, Mr.Y. Maria Ambrose Raj , Mr.C. Kalaiselvan , Mr.R. KrishnaMoorthy published a paper titled A numerical and experimental assessment of a coated diesel engine powered by high-performance nano biofuel in Energy Conversion and Management, Impact Factor=5.5890; Paper Online Link: https://www.sciencedirect.com/science/article/pii/S0196890418306484; DOI: https://doi.org/10.1016/j.enconman.2018.06.039; Volume No: 171, Issue No: 1; PageNo: 815-824; ISSN: 0196-8904; ISBN: 0196-8904 on Sep-2018 (2018-19)
  12. Dr.B.Dhinesh, Mr.Annamalai M published a paper titled A study on performance, combustion and emission behaviour of diesel engine powered by novel nano nerium oleander biofuel in Journal of Cleaner Production, Impact Factor=5.7150; Paper Online Link: https://www.sciencedirect.com/science/article/pii/S0959652618316500; DOI: https://doi.org/10.1016/j.jclepro.2018.06.002; Volume No: 196, Issue No: 1; PageNo: 74-83; ISSN: 0959-6526; ISBN: 0959-6526 on Sep-2018 (2018-19)
  13. Mr.Lingesan Subramani, Dr.Parthasarathy M, Dr.B.Dhinesh, Mr.Krishnamoothy R published a paper titled Novel Garcinia gummi-gutta methyl ester (GGME) as a potential alternative feedstock for existing unmodified DI diesel engine in Renewable Energy, Impact Factor=4.3570; Paper Online Link: https://www.sciencedirect.com/science/article/pii/S0960148118302866; DOI: https://doi.org/10.1016/j.renene.2018.02.134; Volume No: 125, Issue No: 1; PageNo: 568-577; ISSN: 0960-1481; ISBN: 0960-1481 on Sep-2018 (2018-19)
  14. Dr.N.Rajesh Jesudoss Hynes, Mr.R.Kumar published a paper titled Electrochemical Machining of Aluminium Metal Matrix Composites in Surface Engineering and Applied Electrochemistry, Impact Factor=0.2890; Paper Online Link: https://link.springer.com/article/10.3103%2FS1068375518040087; DOI: 10.3103/S1068375518040087; Volume No: 54, Issue No: 4; PageNo: 367-373; ISSN: 1068-3755; ISBN: 1068-3755 on Oct-2018 (2018-19)
  15. Mr.R.Kumar, Dr.N.Rajesh Jesudoss Hynes published a paper titled Influence of rotational speed on mechanical features of thermally drilled holes in dual-phase steel in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Impact Factor=1.4450; Paper Online Link: https://journals.sagepub.com/doi/full/10.1177/0954405418805601; DOI: 10.1177/0954405418805601; Volume No: 233, Issue No: 5; PageNo: 1614-1625; ISSN: 09544054; ISBN: 09544054 on Oct-2018 (2018-19)
  16. Dr.Muthiah.A, Dr.Pitchipoo.P, Dr.R.Rajkumar published a paper titled Hybridization of firefly and ant colony optimization algorithm for job shop scheduling in Journal of the Balkan Tribological Association, Impact Factor=0.7370; Paper Online Link: https://www.tib.eu/en/search-discover/browse-subjects/browse-through-journals/?no_cache=1&tx_tibsearch_browsing%5Bsubject%5D=mas&tx_tibsearch_browsing%5Bvolume%5D=24&tx_tibsearch_browsing%5Bissue%5D=3&tx_tibsearch_browsing%5Bissn%5D%5B0%5D=1310-4772&tx_tibsearch_browsing%5Btitle%5D=Journal%20of%20the%20Balkan%20Tribological%20Association&tx_tibsearch_browsing%5Bsubtitles%5D=&tx_tibsearch_browsing%5Baction%5D=toc&cHash=2e378ffeb1b4b3d3ba1c118475b33c1f; DOI: -1; Volume No: 24, Issue No: 4; PageNo: 654-662; ISSN: 13104772; ISBN: on Oct-2018 (2018-19)
  17. Mr.M.Anandhan, Dr.T.Prabaharan, Dr.M.Muhaidheen, Mr.S.Balamurugan published a paper titled FIRE SAFETY ASSESSMENT IN MANUFACTURING OF FIREWORKS PRODUCTS in International Journal of Mechanical Engineering and Technology (IJMET), Impact Factor=0.5000; Paper Online Link: http://www.iaeme.com/ijmet/issues.asp?JType=IJMET&VType=9&IType=10; DOI: 0; Volume No: 9, Issue No: 10; PageNo: 1336-1345; ISSN: 0976-6340; ISBN: -- on Oct-2018 (2018-19)
  18. Dr.R.Maheswaran, Mr. Srinivasan V published a paper titled MODAL–COTTON FIBRE BLEND RATIO AND RING FRAME PARAMETER OPTIMISATION THROUGH THE TAGUCHI METHOD in AUTEX Research Journal, Impact Factor=0.9570; Paper Online Link: https://www.degruyter.com/downloadpdf/j/aut.ahead-of-print/aut-2018-0036/aut-2018-0036.pdf; DOI: , DOI: 10.1515/aut-2018-0036 © AUTEX ; Volume No: .., Issue No: ..; PageNo: 1-11; ISSN: 1470-9589; ISBN: on Oct-2018 (2018-19)
  19. Dr.A.Vasanthanathan, Dr.P.Nagaraj, Mr.K. Karthick Raja, Mr. R. Kumar Arjun, Mr.M. Rajakalai published a paper titled Shape memory alloy based smart link for aircraft wing structure: FE modelling and experiments in Journal of Structural Engineering, Impact Factor=0.2500; Paper Online Link: http://serc.res.in/jose/; DOI: 0970-0137 ; Volume No: 45, Issue No: 2; PageNo: 127-138; ISSN: 0970-0137 ; ISBN: 0970-0137 on Oct-2018 (2018-19)
  20. Dr.N.Rajesh Jesudoss Hynes, Dr.P.Shenbaga Velu published a paper titled NUMERICAL SIMULATION OF FRICTION WELDING OF ALUMINIUM/TITANIUM JOINTS in Materials Research Express, Impact Factor=1.1510; Paper Online Link: https://iopscience.iop.org/article/10.1088/2053-1591/aaf249; DOI: 10.1088/2053- 1591/aaf249; Volume No: 6, Issue No: 2; PageNo: 0-0; ISSN: 2053-1591; ISBN: 2053-1591 on Nov-2018 (2018-19)
  21. Dr.N.Rajesh Jesudoss Hynes, Mr.R.Kumar, Dr.P.Shenbaga Velu, Dr.J.Angela Jennifa Sujana published a paper titled Optimization of friction stud welding process parameters by integrated Grey-Fuzzy logic approach in Journal of applied research and technology, Impact Factor=0.4470; Paper Online Link: http://www.scielo.org.mx/scielo.php?pid=S1665-64232018000400276&script=sci_arttext; DOI: S1665-64232018000400276; Volume No: 16, Issue No: 4; PageNo: 276-286; ISSN: 2448-6736; ISBN: 2448-6736 on Nov-2018 (2018-19)
  22. Mr.S Balamurgan, Mr.C.Bala Manikandan, Mr.P.Balamurugan published a paper titled A study on magnetic field assisted laser percussion drilling and its effect on surface integrity in Archives of Materials Science and Engineering, Impact Factor=0.0000; Paper Online Link: https://archivesmse.org/resources/html/article/details?id=183223; DOI: 10.5604/01.3001.0012.7806; Volume No: 94, Issue No: 1; PageNo: 35-40; ISSN: 1897-2764; ISBN: -- on Nov-2018 (2018-19)
  23. Dr.R.Maheswaran, Mr.S Arockia Reemas published a paper titled Mechanical Characterization of Expanded Polystyrene Spheres Embed Sandwich Composites for Packaging Applications in Journal of Applied Packaging Research, Impact Factor=0.1050; Paper Online Link: https://scholarworks.rit.edu/japr/vol10/iss5/1/; DOI: japr/vol10/iss5/1; Volume No: 10, Issue No: 5; PageNo: 1-12; ISSN: 1557-7224; ISBN: on Nov-2018 (2018-19)
  24. Mr.P. V. Elumalai, Dr.K.Annamalai, Dr.B.Dhinesh published a paper titled Effects of thermal barrier coating on the performance, combustion and emission of DI diesel engine powered by biofuel oil–water emulsion in Journal of Thermal Analysis and Calorimetry, Impact Factor=2.4710; Paper Online Link: https://link.springer.com/article/10.1007/s10973-018-7948-6; DOI: https://doi.org/10.1007/s10973-018-7948-6; Volume No: 137, Issue No: 2; PageNo: 593-605; ISSN: 1388-6150; ISBN: 1588-2926 on Dec-2018 (2018-19)
  25. Mr.C.Bala Manikandan, Mr.S.Balamurugan, Mr.P.Balamurugan, Mr.S.Lionel Beneston published a paper titled Weight reduction of motorcycle frame by topology optimization in Journal of Achievements in Materials and Manufacturing Engineering, Impact Factor=0.0000; Paper Online Link: https://journalamme.org/resources/html/article/details?id=185520; DOI: 10.5604/01.3001.0012.9664; Volume No: 91, Issue No: 2; PageNo: 67-77; ISSN: 1734-8412; ISBN: on Dec-2018 (2018-19)
  26. Dr.N.Rajesh Jesudoss Hynes, Mr.R.Kumar published a paper titled Simulation of Friction Drilling of Cu2C in Material Today Proceedings, Impact Factor=0.3100; Paper Online Link: https://www.sciencedirect.com/science/article/pii/S221478531832193X; DOI: 10.1016/j.matpr.2018.09.026; Volume No: 5, Issue No: 13; PageNo: 27161-27165; ISSN: ISSN: 2214-7853; ISBN: ISSN: 2214-7853 on Dec-2018 (2018-19)
  27. Dr.Nanthagopal K, Dr.B.Ashok, Mr.Raghuram Srivatsava Garnepudia, Mr.Kavalipurapu Raghu Taruna, Dr.B.Dhinesh published a paper titled Investigation on diethyl ether as an additive with Calophyllum Inophyllum biodiesel for CI engine application in Energy Conversion and Management, Impact Factor=6.3770; Paper Online Link: https://doi.org/10.1016/j.enconman.2018.10.064; DOI: https://doi.org/10.1016/j.enconman.2018.10.064; Volume No: 179, Issue No: 1; PageNo: 104-113; ISSN: 0196-8904; ISBN: 0196-8904 on Dec-2018 (2018-19)
  28. Mr.V.S.Prabhin, Dr.K.Jeyasubramanian, Miss.I. Jeyaseeli Rashmi, Mr.G.S.Hikku, Dr.V.Pandyarasan, Dr.Byung Jin Cho published a paper titled Investigation of electrochemical capacitance of 18k nanoporous current collector incorporated MnO2 in Materials Chemistry and Physics, Impact Factor=2.2100; Paper Online Link: https://www.sciencedirect.com/science/article/pii/S0254058418307211; DOI: https://doi.org/10.1016/j.matchemphys.2018.08.056; Volume No: 220, Issue No: 0; PageNo: 128-136; ISSN: ISSN: 0254-0584; ISBN: ISSN: 0254-0584 on Dec-2018 (2018-19)
  29. Mr.G.S.Hikku, Dr.K.Jeyasubramanian, Mr.J.Jacobjose, Dr.P.Thiruramanathan, Dr.V.Pandyarasan, Dr.Hiroya Ikeda published a paper titled Alkyd resin based hydrophilic self-cleaning surface with self-refreshing behaviour as single step durable coating in Journal of Colloid and Interface Science, Impact Factor=5.0910; Paper Online Link: https://www.sciencedirect.com/science/article/pii/S0021979718308439; DOI: https://doi.org/10.1016/j.jcis.2018.07.089; Volume No: 531, Issue No: 0; PageNo: 628-641; ISSN: ISSN: 0021-9797; ISBN: ISSN: 0021-9797 on Dec-2018 (2018-19)
  30. Mr.J.Nagarajan, Mr.C.A.K.Arumugam, Dr.R.Rajkumar, Dr.N.Bose published a paper titled Thermal analysis of nanostructured alumina stabilized zirconia coating on exhaust manifold in ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Impact Factor=0.5550; Paper Online Link: https://www.tandfonline.com/toc/ueso20/current; DOI: https://doi.org/10.1080/15567036.2018.1520364; Volume No: 41, Issue No: 7; PageNo: 854-865; ISSN: 1556-7230; ISBN: 1556-7036 on Dec-2018 (2018-19)
  31. Dr.T.Prabaharan, Mr.KARTHIK PANDIYAN. G published a paper titled THE HIGH SPEED MACHINING OF METALS USING CRYOGENIC TREATMENT in International Journal of Mechanical and Production Engineering Research and Development, Impact Factor=0.0000; Paper Online Link: http://www.tjprc.org/international-journals.php; DOI: 0; Volume No: 8, Issue No: 6; PageNo: 611-616; ISSN: 2249-6890; ISBN: -- on Dec-2018 (2018-19)
  32. Dr.N.Rajesh Jesudoss Hynes, Dr.P.Nagaraj, Dr.J.Angela Jennifa Sujana published a paper titled Regression Modelling of Joining Aluminium Studs to Steel with AA 1100 Interlayer in Experimental Techniques, Impact Factor=0.8060; Paper Online Link: https://link.springer.com/article/10.1007/s40799-019-00303-5#citeas; DOI: 10.1007/s40799-019-00303-5; Volume No: 0, Issue No: 0; PageNo: 1-9; ISSN: 1747-1567; ISBN: 1747-1567 on Jan-2019 (2018-19)
  33. Dr.Jeen Robert RB, Dr.R.Rajkumar published a paper titled A Hybrid Algorithm for Multi- Objective Optimization of Minimizing Makespan and Total Flow Time in Permutation Flow Shop Scheduling Problems in Journal of Information Technology and Control, Impact Factor=0.8000; Paper Online Link: http://www.itc.ktu.lt/index.php/ITC; DOI: dx.doi.org/10.5755/j01.itc.48.1.20909 ; Volume No: 48, Issue No: 1; PageNo: 47-57; ISSN: 1392-124X; ISBN: on Jan-2019 (2018-19)
  34. Mr.B.Venkatraman, Mr.S.Senthil Murugan, Mr. K.Venkatesh Prasad, Mr.J.Steve Minold Raj published a paper titled 3D Printing in Biomedical Applications – A Review in International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE), Impact Factor=0.0000; Paper Online Link: http://ijermce.com/abstract.php?id=13432&issue=Issue1; DOI: 01.1617/vol6/iss1/pid18574; Volume No: 4, Issue No: 1; PageNo: 20-23; ISSN: 2456-1290; ISBN: 0000-0000 on Jan-2019 (2018-19)
  35. Dr.N. Vijay Ponraj,, Dr.A.Azhagurajan, Dr.S. C. Vettivel, Dr.X. Sahaya Shajan, Dr.P. Y. Nabhiraj , Dr.A. Haiterlenin published a paper titled MODELING AND OPTIMIZATION OF THE EFFECT OF SINTERING PARAMETERS ON THE HARDNESS OF COPPER/GRAPHENE NANO SHEET COMPOSITES BY RESPONSE SURFACE METHODOLOGY in Metal Science and Heat Treatment, Impact Factor=0.3970; Paper Online Link: https://link.springer.com/article/10.1007/s11041-019-00327-z; DOI: https://doi.org/10.1007/s11041-019-00327-z; Volume No: 60, Issue No: 9-10; PageNo: 611-615; ISSN: 0026-0673; ISBN: 1573-8973 on Jan-2019 (2018-19)
  36. Dr.N.Bose, Mr.J.Nagarajan published a paper titled Performance and emission analysis of methyl ester of Azolla algae with TiO2 Nano additive for diesel engine in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Impact Factor=0.5550; Paper Online Link: https://doi.org/10.1080/15567036.2018.1548519; DOI: https://doi.org/10.1080/15567036.2018.1548519; Volume No: 41, Issue No: 12; PageNo: 1434-1445; ISSN: 1556-7036; ISBN: 1556-7036 on Jan-2019 (2018-19)
  37. Mr.S.Senthil Murugan, Mr.K.Maheswaran published a paper titled Hardness Property Measurement, Grain Size Reduction and Heat Treatment of AA6061+CuO Composite with and without TiB2 Addition in Revue des Composites et des Materiaux Avances, Impact Factor=0.0400; Paper Online Link: http://iieta.org/journals/rcma; DOI: https://doi.org/10.18280/rcma.290106 ; Volume No: Vol.29,, Issue No: No.1; PageNo: 33-37; ISSN: 1169-7954; ISBN: -- on Feb-2019 (2018-19)
  38. Mr.S.Senthil Murugan, Mr.K.Maheswaran published a paper titled “Development of Ultra Fine Grained Structure (UFG) on AA6061 and Reinforced with CuO Composite through Equal Channel Angular Pressing (ECAP) Process”, in Revue des Composites et des Materiaux Avances, (ISSN: 1169-7954), Lavoisier, Vol. 28/4 –(2018), pp.481-494., Impact Factor=0.0400; Paper Online Link: https://rcma.revuesonline.com/article.jsp?articleId=40238 ; DOI: doi:10.3166; Volume No: Vol. 28/4 –(2018), Issue No: 4; PageNo: 481-494; ISSN: ISSN: 1169-7954; ISBN: ISSN: 1169-7954 on Feb-2019 (2018-19)
  39. Mr.J.Thanikachalam, Dr.P.Nagaraj, Mr.S.Karthikeyan published a paper titled Preparation and characterization of nano magnetic fluid for automotive applications in Archives of Materials Science and Engineering, Impact Factor=-1.0000; Paper Online Link: https://archivesmse.org/resources/html/articlesList?issueId=12081; DOI: DOI: 10.5604/01.3001.0013.1732; Volume No: 95, Issue No: 2; PageNo: 67-73; ISSN: 1897-2764; ISBN: 1897-2764 on Feb-2019 (2018-19)
  40. Dr.R.B.Jeen Robert, Dr.R.Rajkumar published a paper titled Multi-Objective Optimization using hybrid Algorithm and its Application to Scheduling in Flow Shops in Comptes rendus de l’Acad´emie bulgare des Sciences, Impact Factor=0.2700; Paper Online Link: http://www.proceedings.bas.bg/; DOI: 10.7546/CRABS.2019.01.14; Volume No: 72, Issue No: 1; PageNo: 107-114; ISSN: 13101331; ISBN: on Feb-2019 (2018-19)
  41. Mr.J.Nagarajan, Dr.N.Bose published a paper titled Clove as antioxidant additive in diesel–biodiesel fuel blends in diesel engines in INTERNATIONAL JOURNAL OF GREEN ENERGY, Impact Factor=1.1710; Paper Online Link: https://doi.org/10.1080/15435075.2018.1562931; DOI: https://doi.org/10.1080/15435075.2018.1562931; Volume No: 16, Issue No: 4; PageNo: 284-292; ISSN: 1543-5075; ISBN: 1543-5075 on Feb-2019 (2018-19)
  42. Dr.B.Dhinesh, Dr.Krupakaran Radhakrishnan Lawrence published a paper titled Influence on the effect of titanium dioxide nanoparticles as an additive with Mimusops elengi methyl ester in a CI engine in Environmental Science and Pollution Research, Impact Factor=2.9140; Paper Online Link: https://link.springer.com/article/10.1007/s11356-019-04826-7; DOI: https://link.springer.com/article/10.1007/s11356-019-04826-7; Volume No: 26 , Issue No: 16; PageNo: 16493-1650; ISSN: 1614-7499; ISBN: 0944-1344 on Mar-2019 (2018-19)
  43. Mr.B.Venkatraman, Mr.S.Senthil Murugan, Mr. Venkatesh P. Kannan, Mr.Steve M.R. Joseph published a paper titled 3D Printing in Biomedical Applications in TECNICA ITALIANA-Italian Journal of Engineering Science, Impact Factor=0.0000; Paper Online Link: https://doi.org/10.18280/ti-ijes.630104; DOI: https://doi.org/10.18280/ti-ijes.630104; Volume No: 63, Issue No: 1; PageNo: 28-33; ISSN: 0040-1846; ISBN: -- on Mar-2019 (2018-19)
  44. Dr.R.Rajkumar, Mr.C.A.K.Arumugam, Mr.C. Jayaseelan published a paper titled Characterization of untreated and alkali treated Areca catechu Fiber through Eco-Friendly Composite Plates in International Journal of Recent Trends in Engineering and Research, Impact Factor=0.0000; Paper Online Link: https://www.ijrter.com/special_issues/characterization-of-untreated-and-alkali-treated-areca-catechufiberthrough-eco-friendlycomposite-plates/; DOI: 10.23883/IJRTER.CONF.20190322.025.7XSJM; Volume No: 0, Issue No: 0; PageNo: 201-211; ISSN: 2455–1457; ISBN: on Mar-2019 (2018-19)
  45. Mr.R.Saravana Sathiya Prabhahar, Mr.Arjun Kumar M, Mr.Gowsik Kumaran P, Mr.Arumugesh K S published a paper titled Experimental Analysis of Heat Transfer Characteristics in a Square Duct with Perforated Internal Fins in International Journal of Innovative Technology and Exploring Engineering, Impact Factor=0.0000; Paper Online Link: https://www.ijitee.org/download/volume-8-issue-4s2/; DOI: 0; Volume No: Volume-8, Issue No: 4S2; PageNo: 327-330; ISSN: 2278-3075; ISBN: 2278-3075 on Mar-2019 (2018-19)
  46. Mr.N.Vasiraja, Dr.P.Nagaraj published a paper titled Characterization of SS/Al2O3 functionally graded material coating by plasma spray technique on aluminum plate in Materials Research Express, Impact Factor=1.4490; Paper Online Link: https://iopscience.iop.org/article/10.1088/2053-1591/ab0a91/meta; DOI: https://doi.org/10.1088/2053-1591/ab0a91; Volume No: 6, Issue No: 0606402; PageNo: 1-8; ISSN: 2053-1591; ISBN: 2053-1591 on Mar-2019 (2018-19)
  47. Mr.M.Anandhan, Dr.T.Prabaharan, Dr.M.Muhaidheen, Mr.S. RAGAVENDRAN published a paper titled QUANTITATIVE RISK ASSESSMENT IN LPG STORAGE AREA FOR DIFFERENT FIRE SCENARIOS in International Journal of Mechanical Engineering and Technology (IJMET), Impact Factor=0.5000; Paper Online Link: http://www.iaeme.com/MasterAdmin/uploadfolder/IJMET_10_02_148/IJMET_10_02_148.pdf; DOI: http://www.iaeme.com/MasterAdmin/uploadfolder/IJMET_10_02_148/IJMET_10_02_148.pdf; Volume No: 10, Issue No: 2; PageNo: 1425-1435; ISSN: 0976-6340; ISBN: 0976-6340 on Mar-2019 (2018-19)
  48. Dr.J Sunil, Mr.J Vignesh, Mr.R Vettumpermal, Dr.R.Maheswaran, Mr.R A Arul Raja published a paper titled The thermal properties of CaO-Nanofluids in VACUUM, Impact Factor=2.0670; Paper Online Link: https://www.sciencedirect.com/science/article/pii/S0042207X18326009?dgcid=coauthor; DOI: https://doi.org/10.1016/j.vacuum.2019.01.010; Volume No: 161, Issue No: 3; PageNo: 382-388; ISSN: 0042 - 207X; ISBN: on Mar-2019 (2018-19)
  49. Dr.A.Vasanthanathan, Miss.S.Menaga, Miss.K.Rosemi published a paper titled A Comprehensive Review of Smart Systems through Smart Materials in Current Materials Science, Impact Factor=0.1390; Paper Online Link: https://benthamscience.com/journals/current-materials-science; DOI: 10.2174/2212797612666190408141830; Volume No: 12, Issue No: 1; PageNo: 77-82; ISSN: 2666-1462; ISBN: 2666-1454 on Apr-2019 (2018-19)
  50. Mr.Vinod B, Dr.Ramanathan S, Mrs.Ananthi V, Dr.N.Selvakumar published a paper titled Fabrication and Characterization of Organic and In-Organic Reinforced A356 Aluminium Matrix Hybrid Composite by Improved Double-Stir Casting in Silicon, Impact Factor=1.2460; Paper Online Link: https://link.springer.com/article/10.1007/s12633-018-9881-5; DOI: https://doi.org/10.1007/s12633-018-9881-5; Volume No: 11, Issue No: 2; PageNo: 817-829; ISSN: 1876-990X; ISBN: 0000-000X on Apr-2019 (2018-19)
  51. Dr.M.K.Marichelvam, Mr.Rodrigues Anderson, Mr.K.Maheswaran, Mr. Roy Franck Darius published a paper titled Enzymatic Treatment of Tannery Effluents using Tanin Acyl Hydrolase and Mangifera Indica Biomass in International Journal of Innovative Technology and Exploring Engineering, Impact Factor=-1.0000; Paper Online Link: https://www.ijitee.org/wp-content/uploads/papers/v8i6s3/F11440486S319.pdf; DOI: -1; Volume No: 8, Issue No: 6S3; PageNo: 729-731; ISSN: 2278-3075; ISBN: -- on Apr-2019 (2018-19)
  52. Mr.C.Bala Manikandan, Mr.P.Balamurugan, Mr.S.Lionel Beneston, Mr.S.Balamurugan published a paper titled Braking Force & Braking Time Reduction by using Four Shoe Brake System in International Journal of Innovative Technology and Exploring Engineering, Impact Factor=-1.0000; Paper Online Link: www.ijitee.org/wp-content/uploads/papers/v8i6/F3982048619.pdf; DOI: -1; Volume No: 8, Issue No: 6; PageNo: 1376-1380; ISSN: 2278; ISBN: on Apr-2019 (2018-19)
  53. Mr.C.Bala Manikandan, Mr.S.Balamurugan, Mr.P.Balamurugan, Mr.S.Lionel Beneston published a paper titled Corrosion Inhibition of Mild Steel by using Banana Peel Extract in International Journal of Innovative Technology and Exploring Engineering, Impact Factor=-1.0000; Paper Online Link: www.ijitee.org/wp-content/uploads/papers/v8i6/F3981048619.pdf; DOI: -1; Volume No: 8, Issue No: 6; PageNo: 1372-1375; ISSN: 2278; ISBN: on Apr-2019 (2018-19)
  54. Dr.M.K.Marichelvam, Dr.Mohammad Jawaid, Dr.Mohammad Asim published a paper titled Corn and Rice Starch-Based Bio-Plastics as Alternative Packaging Materials in Fibers, Impact Factor=0.0000; Paper Online Link: https://www.mdpi.com/2079-6439/7/4/32; DOI: 10.3390/fib7040032; Volume No: 7, Issue No: 4; PageNo: 1-13; ISSN: 2079-6439; ISBN: on Apr-2019 (2018-19)
  55. Dr.Karthickeyan Viswanathan, Dr.B.Dhinesh, Dr.Thiyagarajan Subramanian, Dr.Edwin Geo Varuvel published a paper titled Investigating the combined effect of thermal barrier coating and antioxidants on pine oil in DI diesel engine in Environmental Science and Pollution Research, Impact Factor=2.9140; Paper Online Link: https://link.springer.com/article/10.1007/s11356-019-04649-6; DOI: https://doi.org/10.1007/s11356-019-04649-6; Volume No: 26, Issue No: 15; PageNo: 15573-15599; ISSN: 1614-7499; ISBN: 0944-1344 on May-2019 (2018-19)
  56. Mr.J.Anish Jafrin Thilak , Dr.P.Suresh published a paper titled Design and Optimization of Automated Weighing System for Efficient Logistics Management in International Journal of Innovative Research in Science, Engineering and Technology, Impact Factor=0.0000; Paper Online Link: http://www.ijirset.com/upload/2019/may/137_DESIGN.pdf; DOI: DOI:10.15680/IJIRSET.2019.0805137; Volume No: 8, Issue No: 5; PageNo: 5982-5987; ISSN: 2319; ISBN: 2347 on May-2019 (2018-19)
  57. Mr.M.Anandhan, Mr.V. Varun Kalyanaraman published a paper titled Ergonomic Design Of Mechanical Foam Fire Extinguisher in Journal of Emerging Technologies and Innovative Research, Impact Factor=-1.0000; Paper Online Link: http://www.jetir.org/papers/JETIR1905N26.pdf; DOI: -1; Volume No: 6, Issue No: 5; PageNo: 166-171; ISSN: 2349-5162; ISBN: -- on May-2019 (2018-19)
  58. Mr.M.Anandhan, Mr.S.Ragavendran published a paper titled INVESTIGATIONS ON REUSE POSSIBILITY OF ALUMINIUM DROSS IN COMPOSITE PLATE MANUFACTURING in Journal of Emerging Technologies and Innovative Research, Impact Factor=-1.0000; Paper Online Link: http://www.jetir.org/papers/JETIR1905989.pdf; DOI: -1; Volume No: 6, Issue No: 5; PageNo: 639-647; ISSN: 2349-5162; ISBN: -- on May-2019 (2018-19)
  59. Mr.M.Anandhan, Dr.M.Muhaidheen, Mr.J.Thanikachalam, Mr.S.Balamurugan published a paper titled INVESTIGATION ON ACID LEACHING OF EWASTE SCRAPS OBTAINED FROM MODEM BOXES in International Journal of Mechanical Engineering and Technology (IJMET), Impact Factor=2.1300; Paper Online Link: https://www.iaeme.com/MasterAdmin/uploadfolder/IJMET_10_05_012/IJMET_10_05_012.pdf; DOI: http://www.iaeme.com/MasterAdmin/uploadfolder/IJMET_10_02_148/IJMET_10_02_148.pdf; Volume No: 10, Issue No: 5; PageNo: 95-104; ISSN: 0976-6340; ISBN: 0976-6340 on May-2019 (2018-19)
  60. Mr.R.Saravana Sathiya Prabhahar, Mr.M. Prabu, Dr.P.Nagaraj, Mr.J.Thanikachalam published a paper titled CFD Analysis of Biomass Gasification with Air as Medium in International Journal of Recent Technology and Engineering, Impact Factor=0.0000; Paper Online Link: https://www.ijrte.org/wp-content/uploads/papers/v7i6s4/F10640476S419.pdf; DOI: 0; Volume No: 7, Issue No: 6S4; PageNo: 335-338; ISSN: 2277-3878; ISBN: 2277-3878 on May-2019 (2018-19)
  61. Mr.G Karthick Pandian, Dr.T.Prabaharan published a paper titled Investigation of Cryogenic Hardening of EN 19 Steel in International Journal of Innovative Technology and Exploring Engineering, Impact Factor=1.0000; Paper Online Link: Bhopal (Madhya Pradesh), India Email: This email address is being protected from spambots. You need JavaScript enabled to view it., This email address is being protected from spambots. You need JavaScript enabled to view it. Website: ; DOI: www.ijitee.org; Volume No: 8, Issue No: 8; PageNo: 0-0; ISSN: 2278-3075; ISBN: on May-2019 (2018-19)
  62. Mr.S.Balamurugan, Mr.M.Anandhan published a paper titled INVESTIGATION ON SUSTAINABLE EXTRACTION OF PRECIOUS METALS AND RARE ELEMENT FROM E-WASTE in International Journal of Advanced Research Methodology in Engineering & Technology, Impact Factor=-1.0000; Paper Online Link: -1; DOI: -1; Volume No: 3, Issue No: 1; PageNo: 158-161; ISSN: 2456-6446; ISBN: -- on May-2019 (2018-19)
  63. Mr.S.Ragavendran, Mr.M.Anandhan published a paper titled Recovery of Aluminium From Dross and Reuse of Dross For Sustainable Manufacturing in International Journal of Advanced Research Methodology in Engineering & Technology, Impact Factor=-1.0000; Paper Online Link: -1; DOI: -1; Volume No: 3, Issue No: 1; PageNo: 162-165; ISSN: 2456-6446; ISBN: -- on May-2019 (2018-19)
  64. Mr.B Saravanan, Dr.T.Prabaharan published a paper titled ANALYZING THE EFFECT OF WATER SOLUBLE METAL CUTTING FLUID CONCENTRATION AND MACHINING PARAMETERS ON TOOL WEAR, SURFACE ROUGHNESS AND HARDNESS OF CNC MACHINE TURNED SURFACE USING Al2O3 -TICN MIXED INSERT in Journal of the Balkan Tribological Association, Impact Factor=0.4330; Paper Online Link: http://www.scibulcom.net/; DOI: 0.0; Volume No: 25, Issue No: 2; PageNo: 455-464; ISSN: 1310-4772; ISBN: -- on May-2019 (2018-19)
  65. Dr.T.Prabaharan, Mr.K.Maheswaran, Mr.V. Jebaraj, Dr.M.K.Marichelvam published a paper titled ZERO SPEED AND EMERGENCY BRAKING SYSTEM FOR ELECTRICAL OVERHEAD TRAVELLING CRANE in International Journal of Mechanical Engineering and Technology, Impact Factor=0.5000; Paper Online Link: http://www.iaeme.com/MasterAdmin/UploadFolder/IJMET_10_05_007/IJMET_10_05_007.pdf; DOI: -1; Volume No: 10, Issue No: 5; PageNo: 63-68; ISSN: 0976-6340; ISBN: -- on May-2019 (2018-19)
  66. Mr.R.Saravana Sathiya Prabhahar, Dr.P.Nagaraj, Dr.K.Jeyasubramanian published a paper titled Enhanced recovery of H2 gas from rice husk and its char enabled with nano catalytic pyrolysis/gasification in Microchemical Journal, Impact Factor=2.7460; Paper Online Link: https://www.sciencedirect.com/science/article/pii/S0026265X18319490?via%3Dihub; DOI: https://doi.org/10.1016/j.microc.2019.02.024; Volume No: 146, Issue No: May 2019; PageNo: 922-930; ISSN: 0026-265X; ISBN: on May-2019 (2018-19)
  67. Mr.A.Perumal, Dr.A.Azhagurajan, Dr.S.Baskaran, Dr.R Prithivirajan, Dr.P Narayansamy published a paper titled Statistical evaluation and performance analysis of electrical discharge machining (EDM) characteristics of hard Ti-6Al-2Sn-4Zr-2Mo alloy in Materials Research Express, Impact Factor=1.1510; Paper Online Link: https://iopscience.iop.org/article/10.1088/2053-1591/ab06da/meta; DOI: https://doi.org/10.1088/2053-1591/ab06da; Volume No: 6, Issue No: 5; PageNo: 1-17; ISSN: 2053-1591; ISBN: on May-2019 (2018-19)
  68. Dr.Christopher Ezhil Singh, Dr.N.Selvakumar published a paper titled Optimization on Dry Sliding Wear, Electrical Resistivity and Mechanical Properties of Cu–4Cr–xZrC Composites in Journal of Applied Research and Technology, Impact Factor=0.2700; Paper Online Link: http://www.scielo.org.mx/scielo.php?pid=S1665-64232018000400299&script=sci_arttext; DOI: -1; Volume No: 16, Issue No: 4; PageNo: 299-311; ISSN: 1665-6423; ISBN: on Jun-2019 (2018-19)
  69. Mr.M. JEBI BERYLTON, Mr.R.Saravana Sathiya Prabhahar, Dr.P.Nagaraj published a paper titled PYROLYSIS OF JULIFLORA WITH TGA STUDIES in International Journal of Mechanical and Production Engineering Research and Development, Impact Factor=0.0000; Paper Online Link: http://www.tjprc.org/download-coference_files.php?fname=24917db15c4e37e421866448c9ab23d8; DOI: 0; Volume No: 9, Issue No: 2; PageNo: 827-837; ISSN: 2249-6890; ISBN: 2249-6890 on Jun-2019 (2018-19)
  70. Mr.M. PRABU, Dr.P.Nagaraj, Mr.R.Saravana Sathiya Prabhahar published a paper titled AN EXPERIMENTAL AND CFD INVESTIGATION OF BIOMASS GASIFICATION in International Journal of Mechanical and Production Engineering Research and Development, Impact Factor=0.0000; Paper Online Link: http://www.tjprc.org/download-coference_files.php?fname=e21e4e58ad9ab56e8a4634046da90113; DOI: 0; Volume No: 9, Issue No: 2; PageNo: 809-815; ISSN: 2249-6890; ISBN: 2249-6890 on Jun-2019 (2018-19)
  71. Dr.M.K.Marichelvam, Mrs.M.Geetha published a paper titled A hybrid algorithm to solve the stochastic flow shop scheduling problems with machine break down in International Journal of Enterprise Network Management, Impact Factor=-1.0000; Paper Online Link: https://www.inderscience.com/jhome.php?jcode=ijenm; DOI: -1; Volume No: 10, Issue No: 2; PageNo: 162-175; ISSN: 1748-1252; ISBN: -- on Jun-2019 (2018-19)
  72. Dr.M.K.Marichelvam, Mr.K.Kandakodeeswaran published a paper titled Design and Fabrication of Automated Countersinking Machine in International Journal of Modern Studies in Mechanical Engineering (IJMSME), Impact Factor=-1.0000; Paper Online Link: https://www.arcjournals.org/pdfs/ijmsme/v5-i2/2.pdf ; DOI: http://dx.doi.org/10.20431/2454-9711.0502002; Volume No: 5, Issue No: 2; PageNo: 6-17; ISSN: 2454-9711 ; ISBN: -- on Jun-2019 (2018-19)
  73. Dr.P.Radha, Dr.N.Selvakumar, Dr.R. Harichandran published a paper titled Computational Intelligence for analysing the mechanical properties of AA 2219 - B4C + h-BN hybrid nano composites processed by ultrasound assisted casting in Archives of Metallurgy and Materials, Impact Factor=0.8000; Paper Online Link: https://journals.indexcopernicus.com/search/details?id=1231; DOI: 10.2478; Volume No: 64, Issue No: 3; PageNo: 1163-1173; ISSN: 1733-3490; ISBN: 1733-3490 on Jun-2019 (2018-19)

2017-18

  1. Mr.Nandakumar, Dr.N.Bose published a paper titled Reducing VOC emissions in offset printing in Research Institute for Newspaper Development, Impact Factor=0.0000; Paper Online Link: http://www.pressinstitute.in/file-folder/rindsurvey/rind%20survey%20july%202017.pdf; DOI: 0; Volume No: 38, Issue No: 7; PageNo: 6-10; ISSN: ; ISBN: on Jul-2017 (2017-18)
  2. Mr.I. Balasubramanian, Dr.R.Maheswaran, Dr.Ranganath M Singari, Mr.S Velayutha Ganesh published a paper titled A Study on Surface Roughness and Cutting Width for Circular Contour Machining of Stir Cast AA6063/SiC Composites in WEDM in JOURNAL OF ADVANCES IN CHEMISTRY, Impact Factor=2.1150; Paper Online Link: https://cirworld.com/index.php/jac/article/view/5829; DOI: 10.24297/jac; Volume No: 13, Issue No: 10; PageNo: 6524-6530; ISSN: 2321-807X; ISBN: -- on Jul-2017 (2017-18)
  3. Mr.S. Lingesan , Dr.K.Annamalai, Dr.Parthasarathy M, Mr.Krishnamoorthy M, Dr.B.Dhinesh, Dr.J. Isaac JoshuaRamesh Lalvani published a paper titled Production of Garcinia gummi-gutta Methyl Ester (GGME) as a Potential Alternative Feedstock for Existing Unmodified DI Diesel Engine: Combustion, Performance, and Emission Characteristics in Journal of Testing and Evaluation, Impact Factor=0.3890; Paper Online Link: https://www.astm.org/DIGITAL_LIBRARY/JOURNALS/TESTEVAL/PAGES/JTE20170246.htm; DOI: https://doi.org/10.1520/JTE20170246; Volume No: 46, Issue No: 6; PageNo: 1-18; ISSN: 0090-3973; ISBN: 1945-7553 on Aug-2017 (2017-18)
  4. Dr.R. Harichandran, Dr.N.Selvakumar published a paper titled Microstructure and mechanical characterization of (B 4 C + h-BN)/Al hybrid nanocomposites processed by ultrasound assisted casting in International Journal of Mechanical Sciences, Impact Factor=-1.0000; Paper Online Link: https://ac.els-cdn.com/S002074031732283X/1-s2.0-S002074031732283X-main.pdf?_tid=ded067d2-0711-11e8-957c-00000aacb35e&acdnat=1517463577_14a8434f8e42a1cfd6022bf7d7966354; DOI: 10.1016/j. ijmecsci.2017.08.039; Volume No: -1, Issue No: -1; PageNo: 1-13; ISSN: 00207403; ISBN: on Aug-2017 (2017-18)
  5. Dr.B.Dhinesh, Mr.R.Niruban Bharathi, Mr.Isaac JoshuaRameshLalvani, Mr.Parthasarathy M, Dr.Annamalai K published a paper titled An experimental analysis on the influence of fuel borne additives on the single cylinder diesel engine powered by Cymbopogon flexuosus biofuel in Journal of the Energy Institute, Impact Factor=3.2040; Paper Online Link: http://www.sciencedirect.com/science/article/pii/S1743967116300721#!; DOI: https://doi.org/10.1016/j.joei.2016.04.010; Volume No: 90, Issue No: 4; PageNo: 634-645; ISSN: 1743-9671; ISBN: 1743-9671 on Aug-2017 (2017-18)
  6. Dr.M.K.Marichelvam, Mrs.M.Geetha published a paper titled Additive Manufacturing Technique for Corrosion less Bicycle Rim Production in Developing Countries like India in International Journal of Modern Studies in Mechanical Engineering, Impact Factor=-1.0000; Paper Online Link: https://www.arcjournals.org/pdfs/ijmsme/v3-i2/5.pdf; DOI: http://dx.doi.org/10.20431/2454-9711.0302005; Volume No: 3, Issue No: 2; PageNo: 40-51; ISSN: 454-9711; ISBN: -- on Aug-2017 (2017-18)
  7. Mr.M. V. Maheshwaran, Dr.N.Rajesh Jesudoss Hynes, Mr.P. Senthamarai Kannan, Dr.S. S. Saravanakumar, Mr.M. R. Sanjay published a paper titled Characterization of natural cellulosic fiber from Epipremnum aureum stem in Journal of Natural Fibers, Impact Factor=0.7300; Paper Online Link: http://www.tandfonline.com/doi/full/10.1080/15440478.2017.1364205; DOI: 10.1080/15440478.2017.1364205; Volume No: -1, Issue No: -1; PageNo: 1-10; ISSN: 1544-0478; ISBN: on Sep-2017 (2017-18)
  8. Mr.Mohit Vishnoi, Dr.V Muthupandi, Mr.S.Senthil Murugan published a paper titled Characterization of hydrophobic coating developed by micro arc oxidation on AA2014 alloy in Indian Journal of Engineering & Materials Sciences, Impact Factor=0.4850; Paper Online Link: http://www.niscair.res.in/sciencecommunication/researchjournals/rejour/ijems/ijems0.asp; DOI: -1; Volume No: 24, Issue No: 5; PageNo: 325-330; ISSN: 0971-4588; ISBN: -- on Oct-2017 (2017-18)
  9. Dr.M. Sivaraj, Dr.N.Selvakumar published a paper titled Effect of Particle Size on the Deformation Behaviour of Sintered Al–TiC Nano Composites in Transactions of the Indian Institute of Metals, Impact Factor=0.5330; Paper Online Link: https://link.springer.com/article/10.1007/s12666-016-1030-5; DOI: 10.1007/s12666-016-1030-5; Volume No: 70, Issue No: 8; PageNo: 2093-2102; ISSN: 0019493X; ISBN: on Oct-2017 (2017-18)
  10. Mr.R.Kumar, Dr.N.Rajesh Jesudoss Hynes, Mr.P. Senthamarai Kannan, Mr.S. S. Saravanakumar, Mr.M. R. Sanjay published a paper titled Physicochemical and Thermal Properties of Ceiba pentandra Bark Fiber in Journal of Natural Fibers, Impact Factor=0.7300; Paper Online Link: http://www.tandfonline.com/doi/full/10.1080/15440478.2017.1369208; DOI: 10.1080/15440478.2017.1369208; Volume No: -1, Issue No: -1; PageNo: 1-8; ISSN: 1544-0478; ISBN: on Oct-2017 (2017-18)
  11. Dr.R.Maheswaran, Mr.Sunil J. published a paper titled Relative anti-wear property evaluation of nano garnet gear lubricant in International Journal of Surface Science and Engineering, Impact Factor=0.4400; Paper Online Link: http://www.inderscience.com/info/inarticle.php?artid=87418; DOI: 10.1504/IJSURFSE.2017.10008354; Volume No: 11, Issue No: 4; PageNo: 320-343; ISSN: 1749-785X; ISBN: -- on Oct-2017 (2017-18)
  12. Dr.M.K.Marichelvam, Dr.A.Azhagurajan, Mrs.M. Geetha published a paper titled Reduction of spare parts inventory through combined analysis technique – a case study in a public sector company in India in Services and Operations Management, Impact Factor=-1.0000; Paper Online Link: https://www.inderscienceonline.com/doi/abs/10.1504/IJSOM.2017.087851; DOI: https://doi.org/10.1504/IJSOM.2017.087851; Volume No: 28, Issue No: 4; PageNo: 495-523; ISSN: 1744-2370; ISBN: -- on Oct-2017 (2017-18)
  13. Mr.Sankaranarayanan.R, Dr.N.Rajesh Jesudoss Hynes published a paper titled Prospects of Joining Multi-Material Structures in AIP Conference Proceedings, Impact Factor=-1.0000; Paper Online Link: https://doi.org/10.1063/1.5033165; DOI: https://doi.org/10.1063/1.5033165; Volume No: 1953, Issue No: -1; PageNo: 1300211-1300215; ISSN: --; ISBN: ISBN: 978-0-7354-1648-2 on Nov-2017 (2017-18)
  14. Dr.I. Balasubramanian , Dr.R.Maheswaran, Dr.Ranganath M Singari, Mr.S Velayutha Ganesh published a paper titled A Study on Surface Roughness and Cutting Width for Circular Contour Machining of Stir Cast AA6063/SiC Composites in WEDM in J o u r n a l o f A d v a n c e s i n c h e m i s t r y, Impact Factor=0.0000; Paper Online Link: https://www.researchgate.net/publication/314077661_A_Study_on_Surface_Roughness_and_Cutting_Width_for_Circular_Contour_Machining_of_Stir_Cast_AA6063SiC_Composites_in_WEDM; DOI: NO; Volume No: 13, Issue No: 0; PageNo: 6524-6530; ISSN: 2 3 2 1 - 8 0 7 X; ISBN: on Nov-2017 (2017-18)
  15. Mr.S.Arockia Reemas, Dr.R.Maheswaran published a paper titled Effect of EPS volume fraction in buoyancy characteristics of expanded polystyrene epoxy sandwich composites in International Journal of Materials Engineering Innovation, Impact Factor=0.4000; Paper Online Link: http://www.inderscience.com/info/inarticle.php?artid=88092; DOI: 10.1504/IJMATEI.2017.10008995; Volume No: 8, Issue No: 2; PageNo: 146-157; ISSN: 1757-2762; ISBN: 1757-2762 on Nov-2017 (2017-18)
  16. Dr.P. Manimaran, Mr.P. Senthamaraikannan, Dr.M. R. Sanjay, Dr.M.K.Marichelvam, Dr.Mohammad Jawaid published a paper titled Study on Characterization of Furcraea Foetida new natural Fiber as Composite Reinforcement for lightweight Applications in Carbohydrate Polymers, Impact Factor=4.8110; Paper Online Link: https://www.sciencedirect.com/science/article/pii/S0144861717313851; DOI: https://doi.org/10.1016/j.carbpol.2017.11.099; Volume No: 181, Issue No: -1; PageNo: 650-658; ISSN: 0144-8617; ISBN: -- on Nov-2017 (2017-18)
  17. Dr.M.K.Marichelvam, Mr.K.Kandakodeeswaran published a paper titled A Dual Side Shaping Machine for Industrial Applications in Modern Studies in Mechanical Engineering, Impact Factor=-1.0000; Paper Online Link: https://www.arcjournals.org/pdfs/ijmsme/v3-i3/5.pdf; DOI: http://dx.doi.org/10.20431/2454-9711.0303005; Volume No: 3, Issue No: 3; PageNo: 40-48; ISSN: 2454-9711; ISBN: -- on Nov-2017 (2017-18)
  18. Dr.V.Ezhilmaran , Dr.L. Vijayaraghavan, Dr.N.J. Vasa published a paper titled Investigation of Nd3+:YAG Laser Aided Surface Texturing to Improve Tribological Characteristics of Piston Ring in JLMN-Journal of Laser Micro/Nanoengineering, Impact Factor=0.7890; Paper Online Link: http://www.jlps.gr.jp/jlmn/upload/1a81bd69e316b2eb04be95cf02a60fa5.pdf; DOI: 10.2961/jlmn.2017.03.0004; Volume No: 12, Issue No: 3; PageNo: 195-202; ISSN: 1880-0688; ISBN: 1880-0688 on Dec-2017 (2017-18)
  19. Dr.V.Ezhilmaran , Dr. N.J. Vasa, Dr.L. Vijayaraghavan published a paper titled Investigation on generation of laser assisted dimples on piston ring surface and in?uence of dimple parameters on friction in Surface & Coatings Technology, Impact Factor=3.1920; Paper Online Link: https://www.sciencedirect.com/science/article/abs/pii/S0257897217312835?via%3Dihub; DOI: doi.org/10.1016/j.surfcoat.2017.12.052; Volume No: 335, Issue No: 335; PageNo: 314-326; ISSN: 0257-8972; ISBN: 0257-8972 on Dec-2017 (2017-18)
  20. Dr.M.K.Marichelvam, Mr.K.Kandakodeeswaran published a paper titled Enhancing Lightning Resistance property of the Polymer Composites in Journal of Polymer Materials : An International Journal, Impact Factor=0.3770; Paper Online Link: http://www.printspublications.com/journal/journalofpolymermaterialsaninternationaljournal13712463644; DOI: -1; Volume No: 34, Issue No: 4; PageNo: 733-745; ISSN: 0973-8622; ISBN: -- on Dec-2017 (2017-18)
  21. Dr.N.Bose published a paper titled Combustion and Emission Characteristics on Methyl Esters of Jatropha Oil in aCI Engine- an Experimental Analysis in International Journal of Innovative Research in Science, Engineering and Technology, Impact Factor=-1.0000; Paper Online Link: https://www.ijirset.com/current-issue.html; DOI: 10.15680/IJIRSET.2017.0612058 ; Volume No: 6, Issue No: 12; PageNo: 22532-22538; ISSN: 2347-6710 ; ISBN: on Dec-2017 (2017-18)
  22. Dr.N.Rajesh Jesudoss Hynes, Mr.R.Kumar published a paper titled Process optimization for maximizing bushing length in thermal drilling using integrated ANN-SA approach in Journal of the Brazilian Society of Mechanical Sciences and Engineering, Impact Factor=1.2350; Paper Online Link: https://link.springer.com/article/10.1007/s40430-017-0820-y; DOI: 10.1007/s40430-017-0820-y; Volume No: 39, Issue No: 12; PageNo: 5097-5108; ISSN: 1678-5878; ISBN: 1806-3691 on Dec-2017 (2017-18)
  23. Mr.Vijay Ponraj, Dr.S.C.Vettivel, Dr.A.Azhagurajan, Mr.X.Shahaya Shajan, Dr.P.Y.Nabhiraj, Dr.V.Theivashanthi published a paper titled Effect of milling on dispersion of graphene nanosheet reinforcement in different morphology copper powder matrix in Surfaces and Interfaces, Impact Factor=-1.0000; Paper Online Link: https://www.sciencedirect.com/science/article/pii/S2468023017301232; DOI: https://doi.org/10.1016/j.surfin.2017.10.006; Volume No: 9, Issue No: -1; PageNo: 260-265; ISSN: 2468-023; ISBN: -- on Dec-2017 (2017-18)
  24. Dr.V.Ezhilmaran , Dr.L. Vijayaraghavan, Dr.N.J. Vasa, Dr.S. Sivaramakrishnan published a paper titled Influence of pulse width in laser assisted texturing on moly-chrome films in Applied Physics A- Material Science and Processing, Impact Factor=1.7840; Paper Online Link: https://link.springer.com/article/10.1007/s00339-018-1582-9; DOI: doi.org/10.1007/s00339-018-1582-9; Volume No: 124, Issue No: 167; PageNo: 1-8; ISSN: 0947-8396; ISBN: 0947-8396 on Jan-2018 (2017-18)
  25. Mr.K.Vinukumar, Dr.A.Azhagurajan, Dr.S.C.Vettivel, Dr.N. Vedaraman published a paper titled Rice husk as nanoadditive in diesel–biodiesel fuel blends used in diesel engin in Journal of Thermal Analysis and Calorimetry, Impact Factor=1.9530; Paper Online Link: https://link.springer.com/journal/10973/131/2/page/3; DOI: DOI 10.1007/s10973-017-6692-7; Volume No: 131, Issue No: 2; PageNo: 1333-1343; ISSN: 1388-6150 ; ISBN: on Jan-2018 (2017-18)
  26. Mr.N. Vijay Ponraj, Dr.A.Azhagurajan, Dr.S.C.Vettivel, Dr.X. Sahaya shajan, Dr.P.Y. Nabhiraj published a paper titled Study of Processing and microstructure studies of copper composite reinforced with graphene nanosheet by powder metallurgy technique in Powder Metallurgy and Metal Ceramics, Impact Factor=0.3420; Paper Online Link: https://link.springer.com/journal/11106/onlineFirst/page/1; DOI: DOI 10.1007/s11106-018-9925-9; Volume No: 56, Issue No: 9-10; PageNo: 523-534; ISSN: 1068-1302; ISBN: on Jan-2018 (2017-18)
  27. Dr.M.K.Marichelvam, Mr.K. Manivannan, Mrs.M. Geetha published a paper titled Investigation on Corn Starch based Bio plastics for Packing Application with Various Additives in International Journal of Engineering Technology Science and Research, Impact Factor=-1.0000; Paper Online Link: http://conferenceinfo.org/kcfinder/upload/files/list_28janoucip2018.pdf; DOI: -1; Volume No: 5, Issue No: 4; PageNo: 1200-1204; ISSN: 2394 – 3386; ISBN: -- on Jan-2018 (2017-18)
  28. Mr.Grinath, Mr.A Mathew, Mr.J BABU, Mr.J.Thanikachalam, Mr.S S Bose published a paper titled Improvement of Surface Finish and Reduction of Tool Wear during Hard Turning of AISI D3 using Magnetorheological Damper in Journal of Scientific and Industrial Research, Impact Factor=0.5570; Paper Online Link: http://nopr.niscair.res.in/handle/123456789/43311; DOI: JSIR Vol.77(01) [January 2018]; Volume No: 77, Issue No: 2018; PageNo: 35-40; ISSN: 0022-4456 ; ISBN: 0975-1084 on Jan-2018 (2017-18)
  29. Dr.R.Maheswaran, Dr.J.Sunil, Mr.R. Vettumperumal, Mr.S. Velu Subhash published a paper titled Stability analysis of CuO suspended API GL-5 gear lubricant sol in Journal of Molecular Liquids, Impact Factor=3.6480; Paper Online Link: https://www.sciencedirect.com/science/article/pii/S0167732217335481; DOI: https://doi.org/10.1016/j.molliq.2017.11.102; Volume No: 249, Issue No: 1; PageNo: 617-622; ISSN: 0167-7322; ISBN: -- on Jan-2018 (2017-18)
  30. Dr.B.Dhinesh, Mr.Sabari Rajan Sokkalingam Arumugam, Mr.Lingesan Subramani, Dr.Isaac JoshuaRamesh Lalvani Joshua Stephen Chellakumar, Mr.Annamalai Mani published a paper titled A numerical study on the effect of various combustion bowl parameters on the performance, combustion, and emission behavior on a single cylinder diesel engine in Environmental Science and Pollution Research, Impact Factor=2.7410; Paper Online Link: https://link.springer.com/article/10.1007/s11356-017-0565-2; DOI: https://link.springer.com/article/10.1007/s11356-017-0565-2; Volume No: 25, Issue No: 1; PageNo: 2273-2284; ISSN: 0944-1344; ISBN: 1614-7499 on Jan-2018 (2017-18)
  31. Dr.Muthiah.A, Dr.R.Rajkumar published a paper titled Production Scheduling Problem Solving with Sequence Dependent Set-up Times by using Genetic Algorithm in Perspectivas em Ciencia da Informacao, Impact Factor=0.0467; Paper Online Link: -1; DOI: -1; Volume No: 22, Issue No: 6; PageNo: 93-111; ISSN: 14139936; ISBN: on Feb-2018 (2017-18)
  32. Dr.M.Sivaraj, Mr.S. Muthuraman, Dr.N.Selvakumar published a paper titled Effect of processing and nano scale reinforcement on the cold forming of Al-TiC Composites in International Journal of ChemTech Research, Impact Factor=1.0700; Paper Online Link: http://sphinxsai.com/2018/ch_vol11_no2/2/(283-295)V11N02CT.pdf; DOI: 10.20902/IJCTR.2018.110234; Volume No: 11, Issue No: 2; PageNo: 283-295; ISSN: 0974-4290; ISBN: - on Feb-2018 (2017-18)
  33. Mr.Krishnamoorthy R, Dr.Annamalai K, Mr.Lingesan S, Dr.B.Dhinesh, Mr.Paul James Thadhani, published a paper titled An assessment of combustion, performance characteristics and emission control strategy by adding anti-oxidant additive in emulsified fuel in Atmospheric Pollution Research, Impact Factor=1.6370; Paper Online Link: https://doi.org/10.1016/j.apr.2018.02.007; DOI: https://doi.org/10.1016/j.apr.2018.02.007; Volume No: 1, Issue No: 1; PageNo: 1-9; ISSN: 1309-1042; ISBN: 1309-1042 on Feb-2018 (2017-18)
  34. Dr.N.Rajesh Jesudoss Hynes, Mr.Shenbaga Velu published a paper titled Microstructural and Mechanical properties on Friction Welding of dissimilar metals used in motor vehicles in Materials Research Express, Impact Factor=1.0680; Paper Online Link: http://iopscience.iop.org/article/10.1088/2053-1591/aaabe6; DOI: 10.1088/2053-1591/aaabe6; Volume No: 5, Issue No: 2; PageNo: 26521-26532; ISSN: 2053-1591; ISBN: 2053-1591 on Feb-2018 (2017-18)
  35. Dr.M.Sivaraj, Dr.S. Muthuraman, Dr.N.Selvakumar, Mr.S. Rajkumar published a paper titled The effects of tic reinforcement on thermal, electrical and dry sliding wear behaviour of aluminium matrix nano composites in Mechanical and Production Engineering Research and Development (IJMPERD), Impact Factor=-1.0000; Paper Online Link: -1; DOI: -1; Volume No: 8, Issue No: 1; PageNo: 373-388; ISSN: 2249-6890; ISBN: 2249-8001 on Feb-2018 (2017-18)
  36. Dr.N.Rajathilagam, Dr.A.Azhagurajan published a paper titled Safety Audit – A tool to prevent accidents in fireworks industries in Journal of Emerging Technologies and Innovative Research (JETIR), Impact Factor=-1.0000; Paper Online Link: http://www.jetir.org/view?paper=JETIR1803062; DOI: -1; Volume No: 5, Issue No: 3; PageNo: 312-315; ISSN: 2349-5162; ISBN: on Mar-2018 (2017-18)
  37. Dr.N.Bose, Mr.J.Nagarajan, Mr.Dineshkumar Manoharan published a paper titled Effect of natural antioxidants on the oxidation stability of methyl ester of rubber seed oil in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Impact Factor=0.5270; Paper Online Link: https://www.tandfonline.com/doi/full/10.1080/15567036.2018.1454549; DOI: https://doi.org/10.1080/15567036.2018.1454549; Volume No: 40, Issue No: 6; PageNo: 1-8; ISSN: ISSN: 1556-7036 (Print); ISBN: -- on Mar-2018 (2017-18)
  38. Dr.N.Rajesh Jesudoss Hynes, Mr.Shenbaga Velu P published a paper titled Effect of rotational speed on Ti-6Al-4V-AA 6061 friction welded joints in Journal of Manufacturing Processes, Impact Factor=2.3220; Paper Online Link: https://www.sciencedirect.com/journal/journal-of-manufacturing-processes/vol/32/suppl/C; DOI: 10.1016/j.jmapro.2018.02.014; Volume No: 30, Issue No: -1; PageNo: 288-297; ISSN: 1526-6125; ISBN: on Mar-2018 (2017-18)
  39. Dr.N.Rajesh Jesudoss Hynes, Mr.Shenbaga Velu P, Mr.Abeyram M Nithin published a paper titled Friction push plug welding in airframe structures using Ti-6Al-4V plug in Journal of the Brazilian Society of Mechanical Sciences and Engineering, Impact Factor=1.2350; Paper Online Link: https://link.springer.com/article/10.1007/s40430-018-1088-6; DOI: 10.1007/s40430-018-1088-6; Volume No: 40, Issue No: 3; PageNo: 158-165; ISSN: 1806-3691; ISBN: 1678-5878 on Mar-2018 (2017-18)
  40. Dr.N.Rajesh Jesudoss Hynes, Mr.R Kumar published a paper titled Finite-element simulation and validation of material flow in thermal drilling process in Journal of brazilian society of mechanical sciences and engineering, Impact Factor=1.2350; Paper Online Link: https://link.springer.com/article/10.1007/s40430-018-1091-y; DOI: 10.1007/s40430-018-1091-y; Volume No: 40, Issue No: 3; PageNo: 162-172; ISSN: 1806-3691; ISBN: 1678-5878 on Mar-2018 (2017-18)
  41. Mr.K. Karthik Vinayaga, Dr.A.Vasanthanathan, Dr.P.Nagaraj published a paper titled Finite element modeling of smart piezoelectric beam using ANSYS® in Materials Today: Proceedings, Impact Factor=0.8370; Paper Online Link: https://doi.org/10.1016/j.matpr.2017.11.325; DOI: https://doi.org/10.1016/j.matpr.2017.11.372; Volume No: 5, Issue No: 2 Part 2; PageNo: 7078-7085; ISSN: ISSN: 2214-7853 ; ISBN: ISSN: 2214-7853 on Apr-2018 (2017-18)
  42. Mr.J.Jerold John Britto, Dr.A.Vasanthanathan, Dr.P.Nagaraj published a paper titled Finite Element Modeling and Simulation of Condition Monitoring on Composite Materials Using Piezoelectric Transducers - ANSYS® in Materials Today: Proceedings, Impact Factor=0.8370; Paper Online Link: https://doi.org/10.1016/j.matpr.2017.11.325; DOI: https://doi.org/10.1016/j.matpr.2017.11.325; Volume No: 5, Issue No: 2 Part 2; PageNo: 6684-6691; ISSN: ISSN: 2214-7853 ; ISBN: ISSN: 2214-7853 on Apr-2018 (2017-18)
  43. Mr.C.Uthranarayan, Mr.Agni Raja, Mr.Siva Prakash, Mr.Sivanath published a paper titled Gesture Controlled Fire Extinguishing Equipment in International Journal for Science and Advance Research in Technology, Impact Factor=0.0000; Paper Online Link: http://ijsart.com/Home/IssueDetail/22627; DOI: -1; Volume No: 4, Issue No: 4; PageNo: 1302-1305; ISSN: 2395-1052; ISBN: on Apr-2018 (2017-18)
  44. Mr.Arul Raja R.A, Dr.Sunil J, Dr.R.Maheswaran published a paper titled FACTORS AFFECTING THE VISCOSITY OF NANOLUBRICANTS: A REVIEW in INTERNATIONAL JOURNAL OF CREATIVE RESEARCH THOUGHTS, Impact Factor=5.9720; Paper Online Link: http://www.ijcrt.org/archive.php?vol=6&issue=2; DOI: -1; Volume No: 6, Issue No: 2; PageNo: 688-692; ISSN: 2320-2882 ; ISBN: -- on Apr-2018 (2017-18)
  45. Dr.S.Jeyakkannan, Dr.T.Prabaharan published a paper titled Modified improved genetic algorithm to minimise tri-objective functions in a textile mill in International Journal of Industrial and Systems Engineering, Impact Factor=0.3600; Paper Online Link: http://www.inderscience.com/jhome.php?jcode=ijise; DOI: 0; Volume No: 29, Issue No: 1; PageNo: 48-61; ISSN: 1748-5037; ISBN: on Apr-2018 (2017-18)
  46. Mr.S.Agni Raja, Mr.P.A.Siva Prakash, Mr.P.Sivanath Hashwanth, Mr.G.Manoj Kumar published a paper titled Atmospheric Water Generator with Cfd Analysis in International Journal for Science and Advance Research in Technology (IJSART), Impact Factor=4.2840; Paper Online Link: http://ijsart.com/Home/PastIssueList?v=4&i=4; DOI: --; Volume No: 4, Issue No: 4; PageNo: 1316-1319; ISSN: 2395-1052; ISBN: 2395-1052 on Apr-2018 (2017-18)
  47. Mr.N.J.Vignesh, Dr.N.Rajesh Jesudoss Hynes published a paper titled Thermal Analysis of Friction Riveting of Dissimilar Materials in AIP Conference Proceedings, AIP Publishing, Impact Factor=-1.0000; Paper Online Link: proceedings.aip.org; DOI: https://doi.org/10.1063/1.5033285; Volume No: Volume 1953 D, Issue No: Volume 1953 D; PageNo: 1401101-1401104; ISSN: ISSN 0094-243X; ISBN: ISBN 978-0-7354-1652-9 (Vol. D on Apr-2018 (2017-18)
  48. Dr.N.Rajesh Jesudoss Hynes published a paper titled Simulation of Friction Stir Drilling Process in AIP Conference Proceedings, AIP Publishing, Impact Factor=-1.0000; Paper Online Link: proceedings.aip.org; DOI: https://doi.org/10.1063/1.5033284; Volume No: Volume 1953 D, Issue No: Volume 1953 D; PageNo: 1401091-1401094; ISSN: ISSN 0094-243X; ISBN: ISBN 978-0-7354-1652-9 (Vol. D on Apr-2018 (2017-18)
  49. Dr.N.Rajesh Jesudoss Hynes published a paper titled Design and Development of Flapping Wing Micro Air Vehicle in AIP Conference Proceedings, AIP Publishing, Impact Factor=-1.0000; Paper Online Link: proceedings.aip.org; DOI: https://doi.org/10.1063/1.5033279; Volume No: Volume 1953 D, Issue No: Volume 1953 D; PageNo: 1401041-1401044; ISSN: ISSN 0094-243X; ISBN: ISBN 978-0-7354-1652-9 (Vol. D on Apr-2018 (2017-18)
  50. Dr.N.Rajesh Jesudoss Hynes published a paper titled Numerical Modeling of Friction welding of Bi-metal joints for Electrical applications in AIP Conference Proceedings, AIP Publishing, Impact Factor=-1.0000; Paper Online Link: proceedings.aip.org; DOI: https://doi.org/10.1063/1.5033272; Volume No: Volume 1953 D, Issue No: Volume 1953 D; PageNo: 1400971-1400975; ISSN: ISSN 0094-243X; ISBN: ISBN 978-0-7354-1652-9 (Vol. D on Apr-2018 (2017-18)
  51. Dr.N.Rajesh Jesudoss Hynes published a paper titled Design and Development of Hoeken’s structural dynamic linkage based Agro- tiller Machine in AIP Conference Proceedings, AIP Publishing, Impact Factor=-1.0000; Paper Online Link: proceedings.aip.org; DOI: https://doi.org/10.1063/1.5033166; Volume No: Volume 1953 D, Issue No: Volume 1953 D; PageNo: 1300221-1300224; ISSN: ISSN 0094-243X; ISBN: ISBN 978-0-7354-1652-9 (Vol. D on Apr-2018 (2017-18)
  52. Dr.N.Rajesh Jesudoss Hynes published a paper titled Prospects of Joining Multi-Material Structures in AIP Conference Proceedings, AIP Publishing, Impact Factor=-1.0000; Paper Online Link: proceedings.aip.org; DOI: https://doi.org/10.1063/1.5033165; Volume No: Volume 1953 D, Issue No: Volume 1953 D; PageNo: 130021-130025; ISSN: ISSN 0094-243X; ISBN: ISBN 978-0-7354-1652-9 (Vol. D on Apr-2018 (2017-18)
  53. Dr.N.Rajesh Jesudoss Hynes published a paper titled Experimental Study on Joining of AA6063 and AISI 1040 steel in AIP Conference Proceedings, AIP Publishing, Impact Factor=-1.0000; Paper Online Link: proceedings.aip.org; DOI: https://doi.org/10.1063/1.5033164; Volume No: Volume 1953 D, Issue No: Volume 1953 D; PageNo: 1300201-1300204; ISSN: ISSN 0094-243X; ISBN: ISBN 978-0-7354-1652-9 (Vol. D on Apr-2018 (2017-18)
  54. Dr.N.Rajesh Jesudoss Hynes published a paper titled Assesment of Influncing Factors on Mechanical and Electrical Properties of Al/Cu Joints in AIP Conference Proceedings, AIP Publishing, Impact Factor=-1.0000; Paper Online Link: proceedings.aip.org; DOI: https://doi.org/10.1063/1.5033163; Volume No: Volume 1953 D, Issue No: Volume 1953 D; PageNo: 1300191-1300195; ISSN: ISSN 0094-243X; ISBN: ISBN 978-0-7354-1652-9 (Vol. D on Apr-2018 (2017-18)
  55. Dr.N.Rajesh Jesudoss Hynes published a paper titled Numerical Analysis of Thermal Drilling Technique on Titanium sheet metal in AIP Conference Proceedings, AIP Publishing, Impact Factor=-1.0000; Paper Online Link: proceedings.aip.org; DOI: https://doi.org/10.1063/1.5033158; Volume No: Volume 1953 D, Issue No: Volume 1953 D; PageNo: 1300141-1300144; ISSN: ISSN 0094-243X; ISBN: ISBN 978-0-7354-1652-9 (Vol. D on Apr-2018 (2017-18)
  56. Mr.M.Anandhan, Mr.R.Saravana Sathiya Prabhahar, Mr.J.Thanikachalam, Mr.T.Arunraj published a paper titled Evaluation of Phycoremediation Potentials of Microalgae with Reference to Textile Dyeing Industrial Effluent in International Journal of Applied Engineering Research, Impact Factor=-1.0000; Paper Online Link: https://www.ripublication.com/ijaer18/ijaerv13n8_115.pdf; DOI: ; Volume No: Volume 13, Issue No: 8; PageNo: 6440-6445; ISSN: 0973-4562; ISBN: 0973-4562 on Apr-2018 (2017-18)
  57. Mr.Manikandan.A, Dr.R.Rajkumar published a paper titled OPTIMIZING THE FORMULATION OF E-GLASS FIBER AND COTTON SHELL PARTICLES HYBRID COMPOSITES FOR THEIR MECHANICAL BEHAVIOR BY MIXTURE DESIGN ANALYSIS in Materiali in tehnologije / Materials and technology, Impact Factor=0.4360; Paper Online Link: http://mit.imt.si/Revija/izvodi/mit182/annamalai.pdf; DOI: 10.17222/mit.2017.119; Volume No: 52, Issue No: 2; PageNo: 207-214; ISSN: 1580-2949; ISBN: 0000 on Apr-2018 (2017-18)
  58. Dr.M.K.Marichelvam, Mr.K.Maheswaran published a paper titled Design and Development of Engineered Fire Suppression System in International Journal of Modern Studies in Mechanical Engineering, Impact Factor=-1.0000; Paper Online Link: https://www.arcjournals.org/pdfs/ijmsme/v4-i1/3.pdf; DOI: http://dx.doi.org/10.20431/2454-9711.0401003; Volume No: 4, Issue No: 1; PageNo: 17-23; ISSN: 2454-9711; ISBN: -- on Apr-2018 (2017-18)
  59. Dr.M.K.Marichelvam, Dr.A.Azhagurajan, Mrs.M. Geetha published a paper titled Minimisation of total tardiness in hybrid flowshop scheduling problems with sequence dependent setup times using a discrete firefly algorithm in International Journal of Operational Research, Impact Factor=-1.0000; Paper Online Link: -1; DOI: 10.1504/IJOR.2018.10012187; Volume No: 32, Issue No: 1; PageNo: 114-126; ISSN: 1745-7645; ISBN: -- on Apr-2018 (2017-18)
  60. Dr.N.Selvakumar, Mr.R. Malkiya Rasalin Prince published a paper titled Adhesion Behaviour, Nanohardness and Surface Roughness of Ti–6Al–4V–6B4C Thin Films Grown on AISI 1040 Steel in Transactions of the Indian Institute of Metals, Impact Factor=0.5330; Paper Online Link: http://www.springer.com/materials/special+types/journal/12666; DOI: 10.1007/s12666-017-1220-9; Volume No: 71, Issue No: 4; PageNo: 893-899; ISSN: 0972-2815 ; ISBN: - on Apr-2018 (2017-18)
  61. Dr.P.Narayanasamy, Dr.N.Selvakumar, Mr.P.Balasundar published a paper titled Effect of weight percentage of TiC on their tribological properties of magnesium composites in Materials today: Proceedings, Impact Factor=0.1100; Paper Online Link: https://www.sciencedirect.com/science/article/pii/S2214785317325804; DOI: 10.1016/j.matpr.2017.11.312; Volume No: 5, Issue No: 2; PageNo: 6570-6578; ISSN: -; ISBN: - on Apr-2018 (2017-18)
  62. Mr.M.Anandhan, Mr.N.Vasiraja, Mr.J.Thanikachalam, Mr.Suresh R published a paper titled Studies on Environmental Burdens in Reactive Dyeing of Cotton Fabric Pretreated with Cationic Agent in International Journal of Applied Engineering Research, Impact Factor=-1.0000; Paper Online Link: https://www.ripublication.com/ijaer18/ijaerv13n6_194.pdf; DOI: https://www.ripublication.com/ijaer18/ijaerv13n6_194.pdf; Volume No: 13, Issue No: 6; PageNo: 4561-4567; ISSN: 0973-4562 ; ISBN: on Apr-2018 (2017-18)
  63. Dr.T.Prabaharan, Mr.M.Gowtham published a paper titled ANALYSING AND REDUCTION OF HAZARDOUS CONTENTS PRESENT IN THE ASH GENERATED FROM INDUSTRIAL WASTE THROUGH INCINERATION PROCESS in International Journal of Research in Engineering and Technology (IJRET), Impact Factor=0.0000; Paper Online Link: https://ijret.org/volumes/2018v07/i06/IJRET20180706002; DOI: doi.org/10.15623/ijret.2018.0706002 ; Volume No: 7, Issue No: 6; PageNo: 6-10; ISSN: 2321-7308; ISBN: -- on May-2018 (2017-18)
  64. Mr.T. Packiaraj Rajendran, Dr.N.Rajesh Jesudoss Hynes, Dr.T. Christopher3 published a paper titled Characterization of high-carbon high chromium tool steel/low-carbon steel friction-welded joints for industrial tooling applications in Journal of the Brazilian Society of Mechanical Sciences and Engineering, Impact Factor=1.2350; Paper Online Link: https://link.springer.com/article/10.1007/s40430-018-1243-0; DOI: DOI 10.1007/s40430-018-1243-0; Volume No: 40, Issue No: 6; PageNo: 1-8; ISSN: 1678-5878; ISBN: 1678-5878 on May-2018 (2017-18)
  65. Mr.B.Saravanan, Dr.T.Prabaharan published a paper titled Temperature Analysis of ABB Robot Servo Drive with Respect to Programming Methods - (A Preventive Maintenance Method in Manufacturing) in International Journal of Science and Research (IJSR), Impact Factor=0.0000; Paper Online Link: https://www.ijsr.net/; DOI: 10.21275/ART20181870; Volume No: 7, Issue No: 6; PageNo: 147-149; ISSN: 23197064; ISBN: -- on May-2018 (2017-18)
  66. Mr.M.Anandhan published a paper titled Occupational health and safety management system in fireworks industries – an effective way to improve safety performance. in Journal of Emerging Technologies and Innovative Research, Impact Factor=0.0000; Paper Online Link: http://www.jetir.org/papers/JETIR1805501.pdf; DOI: 0; Volume No: 5, Issue No: 5; PageNo: 476-479; ISSN: 2349-5162; ISBN: on May-2018 (2017-18)
  67. Mr.M.Anandhan published a paper titled COMPARATIVE ASSESSMENT AND FEASIBILITY ANALYSIS OF NATURAL DYE SOURCES FOR COMMERCIAL APPLICATION in International Journal of Research in Engineering and Technology, Impact Factor=0.0000; Paper Online Link: https://ijret.org/volumes/2018v07/i05/IJRET20180705009.pdf; DOI: https://doi.org/10.15623/ijret.2018.0705009; Volume No: 7, Issue No: 5; PageNo: 53-56; ISSN: 2321-7308; ISBN: -- on May-2018 (2017-18)
  68. Mr.R.Saravana Sathiya Prabhahar published a paper titled A study on Products of Pyrolysis and Gasification of Biomass in SSRG International Journal of Mechanical Engineering, Impact Factor=0.0000; Paper Online Link: http://www.internationaljournalssrg.org/IJME/2018/Special-Issues/ICCREST/IJME-ICCREST-P104.pdf; DOI: 0; Volume No: 0, Issue No: Special Issue ; PageNo: 87-90; ISSN: 2348 - 8360; ISBN: 2348 - 8360 on May-2018 (2017-18)
  69. Mr.R.Saravana Sathiya Prabhahar published a paper titled Characaterisation of Bio-Oil obtained from Pyrolysis of Biomass in SSRG International Journal of Mechanical Engineering, Impact Factor=0.0000; Paper Online Link: http://www.internationaljournalssrg.org/IJME/2018/Special-Issues/ICCREST/IJME-ICCREST-P104.pdf; DOI: 0; Volume No: 0, Issue No: Special Issue ; PageNo: 44-47; ISSN: 2348 - 8360; ISBN: 2348 - 8360 on May-2018 (2017-18)
  70. Mr.R.Saravana Sathiya Prabhahar, Mr.M.Anandhan published a paper titled Investigation on Pyrolysis of Plastic Waste to Fuel Oil in International Journal of Applied Engineering Research, Impact Factor=0.0000; Paper Online Link: https://www.ripublication.com/ijaer18/ijaerv13n10_153.pdf; DOI: 0; Volume No: Volume 13, Issue No: Number 10; PageNo: 8426-8430; ISSN: 0973-4562; ISBN: 0973-4562 on May-2018 (2017-18)
  71. Dr.T.Prabaharan, Mr.G.Karthick Pandiyan published a paper titled Cryogenic Treatment on Alloy Steels- A Review in International Journal of Engineering Research & Technology (IJERT), Impact Factor=0.0000; Paper Online Link: http://www.ijert.org/IJERTV7IS050237; DOI: IJERTV7IS050237; Volume No: 7, Issue No: 5; PageNo: 398-403; ISSN: 2278-0181; ISBN: -- on May-2018 (2017-18)
  72. Mr.K.Maheswaran, Dr.T.Prabaharan published a paper titled Eliminating the Hazardous Elements from E-Waste by Electrolysis in International Journal of Applied Engineering Research, Impact Factor=0.1400; Paper Online Link: https://www.ripublication.com/ijaer.htm; DOI: 0; Volume No: 13, Issue No: 10; PageNo: 8577-8582; ISSN: 0973-4562; ISBN: -- on May-2018 (2017-18)
  73. Mr.M.Anandhan, Dr.T.Prabaharan published a paper titled Environmental Impacts of Natural Dyeing Process Using Pomegranate Peel Extract as a Dye in International Journal of Applied Engineering Research, Impact Factor=0.1400; Paper Online Link: --; DOI: --; Volume No: 13, Issue No: 10; PageNo: 7765-7771; ISSN: 0973-4562 ; ISBN: -- on May-2018 (2017-18)
  74. Mr.mohit vishnoi, Mr.a v veerendra kumar , Mr.S.Senthil Murugan published a paper titled Parameter optimization of micro ECDM process of borosilicate glass in Environmental and Earth Sciences Research Journal, Impact Factor=0.0000; Paper Online Link: http://iieta.org/Journals/EESRJ; DOI: https://doi.org/10.18280/eesrj.050203; Volume No: 5, Issue No: 2; PageNo: 48-52; ISSN: ISSN:2369-5668; ISBN: nil on Jun-2018 (2017-18)
  75. Mr.T.S.Gokul Raja, Dr.K.Jeyasubramanian, Mrs.M. Indhumathy published a paper titled Development of Superhydrophobic Microfibers for Bandage Coatings in Fibers and Polymers, Impact Factor=1.3530; Paper Online Link: https://link.springer.com/article/10.1007/s12221-018-1085-5; DOI: DOI 10.1007/s12221-018-1085-5; Volume No: 19, Issue No: 6; PageNo: 1207-1218; ISSN: 12299197; ISBN: 12299197 on Jun-2018 (2017-18)
  76. Dr.G.Antony Miraculas, Dr.N.Bose, Dr.Edwin Raj published a paper titled Process parameter optimization for biodiesel production from mixed feedstock using empirical model in Sustainable Energy Technologies and Assessments, Impact Factor=1.2340; Paper Online Link: https://www.sciencedirect.com/science/article/pii/S2213138817303247; DOI: https://doi.org/10.1016/j.seta.2018.06.004; Volume No: 28, Issue No: 4; PageNo: 54-59; ISSN: 2213-1388; ISBN: 2213-1388 on Jun-2018 (2017-18)
  77. Dr.M.K.Marichelvam, Dr.P. Manimaran , Mrs.M. Geetha published a paper titled Solving flexible job shop scheduling problems using a hybrid lion optimisation algorithm in International Journal of Advanced Operations Management,, Impact Factor=-1.0000; Paper Online Link: http://www.inderscience.com/info/ingeneral/forthcoming.php?jcode=ijaom; DOI: -1; Volume No: 10, Issue No: 2; PageNo: 91-108; ISSN: 1758-938X; ISBN: -- on Jun-2018 (2017-18)
  78. Mr.K.Vinukumar, Dr.A.Azhagurajan, Dr.S.C.Vettivel, Dr.N.Vedaraman, Dr. A. Haiter Lenin published a paper titled Biodiesel with nano additives from coconut shell for decreasing emissions in diesel engines in Fuel, Impact Factor=4.6010; Paper Online Link: https://www.sciencedirect.com/science/article/pii/S0016236118303120; DOI: https://doi.org/10.1016/j.fuel.2018.02.129; Volume No: 222, Issue No: -1; PageNo: 180-184; ISSN: 0016-2361; ISBN: on Jun-2018 (2017-18)
  79. Mr.R.A. Arul Raja, Dr. J. Sunil, Dr.R.Maheswaran published a paper titled Estimation of Thermo-Physical Properties of Nanofluids using Theoretical Correlations in International Journal of Applied Engineering Research, Impact Factor=-1.0000; Paper Online Link: https://www.ripublication.com/ijaer18/ijaerv13n10_93.pdf; DOI: -1; Volume No: 13, Issue No: 10; PageNo: 7950-7953; ISSN: 0973-4562; ISBN: on Jun-2018 (2017-18)
  80. Dr.N.Bose published a paper titled PRODUCTION AND CHARACTERIZATION OF BIODIESEL USING AZOLLA PINNATA in Journal of Industrial Pollution Control, Impact Factor=0.3600; Paper Online Link: www.icontrolpollution.com; DOI: www.icontrolpollution.com; Volume No: 34, Issue No: 1; PageNo: 1833-1838; ISSN: ISSN (0970-2083); ISBN: ISSN (0970-2083) on Jun-2018 (2017-18)
  81. Dr.T.Prabaharan, Mr.M.L.Brabin Nivas published a paper titled MINIMIZE MAKESPAN IN HYBRID FLOW SHOP SCHEDULING PROBLEM USING-NEH METHOD in Journal of Emerging Technologies and Innovative Research (JETIR), Impact Factor=0.0000; Paper Online Link: www.jetir.org; DOI: 0; Volume No: 5, Issue No: 6; PageNo: 78-83; ISSN: 2349-5162; ISBN: -- on Jun-2018 (2017-18)
  82. Mr.P.Balamurugan, Mr.C.Bala Manikandan, Dr.B.Dhinesh published a paper titled Design of Customized Additive Manufactured Exoskeleton for Functional Rehabilitation in Patients with Myopathies in International Journal of Research in Engineering and Innovation, Impact Factor=0.0000; Paper Online Link: http://ijrei.com/controller/aviation/Design%20of%20customized%20additive%20manufactured%20exoskeleton%20for%20functional%20rehabilitation%20in%20patients%20with%20myopathies.pdf; DOI: -1; Volume No: 2, Issue No: 3; PageNo: 259-262; ISSN: 2456-6934; ISBN: on Jun-2018 (2017-18)
  83. Dr.R.Maheswaran, Dr.Sunil J published a paper titled Experimental analysis of tribological properties of ultrasonically dispersed garnet nanoparticles in SN500 grade lubricating oil in Industrial Lubrication and Tribology, Impact Factor=0.6050; Paper Online Link: https://www.emeraldinsight.com/doi/full/10.1108/ILT-02-2016-0034; DOI: https://doi.org/10.1108/ILT-02-2016-0034; Volume No: 70, Issue No: 2; PageNo: 250-255; ISSN: 0036-8792; ISBN: -- on Jun-2018 (2017-18)

2016-17

  1. Mr.J.Naveen, AP/MEC; published a paper titled Design and analysis of salt collector in Journal of Achievements of Materials and Manufacturing Engineering vol.74; issue.2; page.86-92; on 05/04/2017 (2016-17)
  2. Dr.T.Prabaharan, P/MEC; published a paper titled “Consequence modelling of BLEVE for LPG Bullet at Dyeing Unit” in International Conference “Innovative Trends in Technology and Management (ICITM – 17),KLU vol.1; issue.1; on 30/03/2017 - 31/03 (2016-17)
  3. Dr.T.Prabaharan, P/MEC; published a paper titled “Determination and comparative analysis of Trace Metal Concentration in Powder and Liquid gel type hair Dyes” in International Conference “Innovative Trends in Technology and Management (ICITM – 17),KLU vol.1; issue.1; on 30/03/2017 - 31/03 (2016-17)
  4. Dr.T.Prabaharan, P/MEC; published a paper titled “Corrosion Inhibition of Mild Steel and Aluminium using Nano Powders of Natural Source” in International Conference “Innovative Trends in Technology and Management (ICITM – 17),KLU vol.1; issue.1; on 30/03/2017 - 31/03 (2016-17)
  5. Dr.A.Vasanthanathan, ASP/MEC; published a paper titled Finite Element Modelling and Simulation of Composite Piezoelectric Transducer Cantilever beam using COMSOL® Multiphysics Tool in Proceedings of Indo-Brazil Bilateral Second International Conference on Advanced Materials & Processing (AMP-17) jointly organised by Kalasalingam University, India and Universidade de Brasília, Brasil vol.1; issue.1; page.9; on 28/03/2017 (2016-17)
  6. Dr.A.Vasanthanathan, ASP/MEC; published a paper titled Smart piezoelectric enabled GFRP Composite plate-A Finite Element approach in Proceedings of Indo-Brazil Bilateral Second International Conference on Advanced Materials & Processing (AMP-17) jointly organised by Kalasalingam University, India and Universidade de Brasília, Brasil vol.1; issue.1; page.79; on 28/03/2017 (2016-17)
  7. Dr.A.Vasanthanathan, ASP/MEC; published a paper titled Finite Element Modelling and Simulation of Landing Gear Model in Proceedings of Indo-Brazil Bilateral Second International Conference on Advanced Materials & Processing (AMP-17) jointly organised by Kalasalingam University, India and Universidade de Brasília, Brasil vol.1; issue.1; page.93; on 28/03/2017 (2016-17)
  8. Dr.A.Vasanthanathan, ASP/MEC; published a paper titled Finite Element Modelling of Smart Piezoelectric Sensors/Actuators in Proceedings of Second National Conference on Innovations in Engineering, Science and Technology (NCIEST-2017), RAMCO Institute of Technology vol.1; issue.1; page.59; on 24/03/2017 (2016-17)
  9. Dr.A.Vasanthanathan, ASP/MEC; published a paper titled Modal Frequency Analysis of Nose Landing Gear for a Trainer Aircraft in Proceedings of Second National Conference on Innovations in Engineering, Science and Technology (NCIEST-2017), RAMCO Institute of Technology vol.1; issue.1; page.59; on 24/03/2017 (2016-17)
  10. Dr.A.Vasanthanathan, ASP/MEC; published a paper titled Mechanical behaviour of Composite Bike Crank under Static Loading Condition using Finite Element Simulation–ANSYSWorkbench® in Proceedings of Second National Conference on Innovations in Engineering, Science and Technology (NCIEST-2017), RAMCO Institute of Technology vol.1; issue.1; page.60; on 24/03/2017 (2016-17)
  11. Dr.A.Vasanthanathan, ASP/MEC; published a paper titled Experimental evaluation of material characterization on glass fiber/epoxy composite material in Proceedings of Second National Conference on Innovations in Engineering, Science and Technology (NCIEST-2017), RAMCO Institute of Technology vol.1; issue.1; page.53; on 24/03/2017 (2016-17)
  12. Dr.A.Vasanthanathan, ASP/MEC; published a paper titled Investigation of Strain Measurement on GFRP Smart Structure by using Experimental and Simulation Tools in Proceedings of Second National Conference on Innovations in Engineering, Science and Technology (NCIEST-2017), RAMCO Institute of Technology vol.1; issue.1; page.52; on 24/03/2017 (2016-17)
  13. Dr.A.Vasanthanathan, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled “Finite Element Modeling and Simulation of Condition Monitoring on Composite Materials using Piezoelectric Transducers - ANSYS®” (https://www.journals.elsevier.com/materials-today-proceedings) in Materials Today: Proceedings vol.InPress; on 21/03/2017 (2016-17)
  14. Dr.A.Vasanthanathan, ASP/MEC; published a paper titled "Finite element modeling of smart piezoelectric beam using ANSYS®" (http://imme17.nitt.edu/) in Proceedings of International Conference on Emerging Trends in Materials and Manufacturing Engineering (IMME17), NIT Trichy vol.1; issue.1; page.19; on 10/03/2017 (2016-17)
  15. Dr.A.Vasanthanathan, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled Finite Element Modeling and Simulation of Condition Monitoring on Composite Materials Using Piezoelectric Transducers - ANSYS® (http://imme17.nitt.edu/) in Proceedings of International Conference on Emerging Trends in Materials and Manufacturing Engineering (IMME17), NIT Trichy vol.1; issue.1; page.135; on 10/03/2017 (2016-17)
  16. Dr.N.Selvakumar, SrP/MEC; published a paper titled Effect of h-BN solid nano lubricant on the dry sliding wear behaviour of Al-B4C nanocomposites(http://www.archivesmse.org/search.php) in Archives of Materials Science and Engineering vol.77; issue.1; on 01/03/2017 (2016-17)
  17. Mr.C.Saravanakumar, O/MEC; Mr.M.Vignesh, T/MEC; published a paper titled Formulation and evaluation of TiO2.Fe2O3 nanopaint (http://www.archivesmse.org/search.php) in Archives of Materials Science and Engineering vol.77; issue.1; page.ICID:1225546; on 01/03/2017 (2016-17)
  18. Dr.A.Azhagurajan, ASP/MEC; published a paper titled Study on nano scale pyrotechnic star chemicals in aerial fireworks manufacturing(http://www.journalamme.org/search.php) in Journal of Achievements in Materials and Manufacturing Engineering vol.74; page.5-10; on 01/03/2017 (2016-17)
  19. Dr.P.Nagaraj, SrPH/MEC; published a paper titled Improving crack resistivity in Al alloy pressure vessels by FSW (http://www.journalamme.org/search.php) in Journal of Achievements of Materials and Manufacturing Engineering vol.79; issue.2; page.54-58; on 01/03/2017 (2016-17)
  20. Dr.P.Nagaraj, SrPH/MEC; Mr.J.Thanikachalam, SrAP/MEC; published a paper titled Effect of graphene as anti-settling agent for magnetorheological fluid(http://www.journalamme.org/search.php) in Journal of Achievements of Materials and Manufacturing Engineering vol.77; issue.2; page.49-56; on 01/03/2017 (2016-17)
  21. Dr.P.Nagaraj, SrPH/MEC; Mr.J.Thanikachalam, SrAP/MEC; published a paper titled Electromagnetic analysis of magnetorheological brakes (http://www.journalamme.org/search.php) in Journal of Achievements of Materials and Manufacturing Engineering vol.76; issue.2; page.61-66; on 01/03/2017 (2016-17)
  22. Mr.R.Saravana Sathiya Prabhahar, SrAP/MEC; published a paper titled Enhancing bio-gas production from kitchen waste using BSA-iron oxide nanoparticles in miniature level bio-reactor (http://www.journalamme.org/search.php) in Journal of Achievements of Materials and Manufacturing Engineering vol.78; issue.2; page.71-77; on 01/03/2017 (2016-17)
  23. Dr.N.Selvakumar, SrP/MEC; Mr.C.Saravanakumar, O/MEC; published a paper titled Synthesis and characterization of NiO-ZnO nanocomposite by a cost efficient self-combustion technique(http://www.journalamme.org/search.php) in Journal of Achievements of Materials and Manufacturing Engineering vol.79; issue.1; page.13-18; on 01/03/2017 (2016-17)
  24. Dr.N.Selvakumar, SrP/MEC; Mr.C.Saravanakumar, O/MEC; published a paper titled Numerical analysis of friction welded titanium joints (http://www.journalamme.org/search.php) in Journal of Achievements of Materials and Manufacturing Engineering vol.76; issue.1; page.26-29; on 01/03/2017 (2016-17)
  25. Dr.T.Prabaharan, P/MEC; published a paper titled Corrosion inhibition in mild steel by anodizing and the extract of Emblica Officinalis(http://www.journalamme.org/search.php) in Journal of Achievements of Materials and Manufacturing Engineering vol.78; issue.1; page.25-31; on 01/03/2017 (2016-17)
  26. Mr.C.Saravanakumar, O/MEC; published a paper titled Starch bioplastic film as an alternative food-packaging material (http://www.journalamme.org/search.php) in Journal of Achievements of Materials and Manufacturing Engineering vol.75; issue.2; on 01/03/2017 (2016-17)
  27. Mr.S.Senthil Murugan, AP/MEC; published a paper titled “Fabrication and Characterization of Al-SiCp-Fly Ash Composite using Stir Casting Process”(http://www.mechjournal.org/) in Journal of Concurrent Advances in Mechanical Engineering vol.1; issue.1; page.19-26; on 26/02/2017 (2016-17)
  28. Dr.M.K.Marichelvam, AP/MEC; published a paper titled “A hybrid fruit fly optimization algorithm to solve the flow shop scheduling problems with multi-objectives”(http://www.inderscience.com/jhome.php?jcode=ijaip) in International Journal of Advance Intelligence paradigms vol.9; issue.2/3; page.164-185; on 22/02/2017 (2016-17)
  29. Mr.S.Senthil Murugan, AP/MEC; published a paper titled “Equal Channel Angular Pressing: A Novel Technique for the Production of Ultra Fine Grained Structure in Materials – A Mini Review” (https://www.arcjournals.org/international-journal-of-modern-studies-in-mechanical-engineering) in International Journal of Modern Studies in Mechanical Engineering vol.InPress; on 21/02/2017 (2016-17)
  30. Dr.A.Azhagurajan, ASP/MEC; published a paper titled “Modelling and optimisation of sintering process parameters on hardness of Cu/Graphene nanosheet composite using response surface methodology”(http://www.springer.com/materials/special+types/journal/11041]) in Metal Science and heat treatment vol.InPress; on 21/02/2017 (2016-17)
  31. Mr.S.Senthil Murugan, AP/MEC; published a paper titled “Development of Bore-Well Rescuer to Save the Life of Innocent Children” (http://www.psgtech.edu/journal) in National Journal of Technology, PSG Tech. vol.InPress; on 20/02/2017 (2016-17)
  32. Dr.P.Nagaraj, SrPH/MEC; published a paper titled "Numerical analysis of waste newspaper as biomass for extraction of Hydrogen"(http://www.internationaljournalssrg.org) in International Conference on Emerging Trends in Engineering, Science and Sustainable Technology-ICETSST-2017 vol.1; issue.1; on 17/02/2017 - 18/02 (2016-17)
  33. Mr.M.Anandhan, SlAP/MEC; published a paper titled “Evaluation of Selected Heavy Metals Concentration” in Proceedings of International Conference on Emerging Trends in Engineering, Science & Sustainable Technology’,Sengunthar Engineering College, Erode vol.1; issue.1; on 17/02/2017 (2016-17)
  34. Mr.R.Saravana Sathiya Prabhahar, SrAP/MEC; published a paper titled “Numerical Analysis of Waste Newspaper as biomass for extraction of Hydrogen” in Proceedings of International Conference on Emerging Trends in Engineering, Science & Sustainable Technology’,Sengunthar Engineering College, Erode vol.1; issue.1; on 17/02/2017 (2016-17)
  35. Dr.T.Prabaharan, P/MEC; published a paper titled “Evaluation of Selected Heavy Metals Concentration” in Proceedings of International Conference on Emerging Trends in Engineering, Science & Sustainable Technology’,Sengunthar Engineering College, Erode vol.1; issue.1; on 17/02/2017 (2016-17)
  36. Dr.M.K.Marichelvam, AP/MEC; published a paper titled “Hybrid monkey search algorithm for flow shop scheduling problem under makespan and total flow time”(http://www.sciencedirect.com/science/article/pii/S1568494617300716) in Applied Soft Computing vol.55; page.82-89; on 07/02/2017 (2016-17)
  37. Mr.S.Senthil Murugan, AP/MEC; published a paper titled “Mechanical Properties of Sic, Al2O3 Reinforced Aluminium 6061-T6 Hybrid Matrix Composite"(http://www.springer.com/engineering/journal/40033) in Journal of The Institution of Engineers (India): Series D vol.InPress; on 07/02/2017 (2016-17)
  38. Dr.A.Azhagurajan, ASP/MEC; published a paper titled “Processing and microstructure studies of copper composite with Graphene nanosheet as reinforcement by power metallurgy technique” (https://link.springer.com/journal/11106) in Journal of Powder Metallurgy and Metal Ceramics vol.InPress; on 04/02/2017 (2016-17)
  39. Dr.K.Jeyasubramanian, P/NST; Mrs.V.S.Benitha, SrAP/NST; published a paper titled “Surface characteristics and thermal stability of Magnetic paint” in International conference on Magnetic Materials and Applications (ICMAGMA-2017),Hyderabad vol.1; issue.1; on 01/02/2017 - 03/02 (2016-17)
  40. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Electrical Resistivity, Tribological Behavior of Multiwalled Carbon Nanotubes and Nanoboron Carbide Particles Reinforced Copper Hybrid Composites for Pantograph Application”(http://www.hindawi.com/journals/amse/2016/3432979/p; http://dx.doi.org/10.1155/2016/3432979) in Advances in Materials Science and Engineering-Article ID 3432979 vol.18; on 01/02/2017 (2016-17)
  41. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Effect of nano/micro B4C particles on the mechanical properties of aluminium metal matrix composites fabricated by ultrasonic cavitation-assisted solidification process”(http://www.journals.elsevier.com/archives-of-civil-and-mechanical-engineering/) in Archives of Civil and Mechanical Engineering vol.16; issue.1; page.147 - 158; on 01/02/2017 (2016-17)
  42. Dr.R.Maheswaran, SrP/MEC; published a paper titled “CFD analysis of Aero foil using dimples and prevent radar signals using stealth technology”(www.archivesmse.org/fulltxt.php?ICID=1225597) in Archives of Materials Science and Engineering vol.77; issue.2; page.72-77; on 01/02/2017 (2016-17)
  43. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Neural networks for predicting the wear properties of sintered Ti-6Al-4V composite reinforced with nano B4C particle and classification using Data Mining Tools” (http://scidoc.org/articlepdfs/IJCNE/IJCNE-03-301.pdf ) in International Journal of Computational & Neural Engineering (IJCNE) vol.3; issue.3; page.40-48; on 01/02/2017 (2016-17)
  44. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Synthesis and Characterization of NiO-ZnO nanocomposite by a cost efficient self-combustion technique” (http://www.journalamme.org/) in Journal of Achievements in Materials and Manufacturing Engineering vol.79; issue.1; page.13 - 18; on 01/02/2017 (2016-17)
  45. Dr.R.Maheswaran, SrP/MEC; published a paper titled “A Study on Surface Roughness and Cutting Width for Circular Contour Machining of Stir Cast AA6063/SiC Composites in WEDM” (https://cirworld.com/index.php/jac/article/view/5829/5866 I S S N 2 3 2 1 - 807 X]) in Journal of Advances in Chemistry vol.13; issue.10; on 01/02/2017 (2016-17)
  46. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Experimental analysis of Al-TiC sintered NanoComposite on EDM process parameters using ANOVA”(http://www.maneyonline.com/loi/mst) in Materials and Manufacturing Processes vol.31; issue.6; page.802 - 812; on 01/02/2017 (2016-17)
  47. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Optimizing the dry sliding wear behavior of copper hybrid Nano composites reinforced with MWCNT’s and Nano B4C using full factorial design” (http://www.springer.com/materials/special+types/journal/12666) in Transactions of the Indian Institute of Metals vol.69; issue.3; page.717 - 732; on 01/02/2017 (2016-17)
  48. Dr.N.Selvakumar, SrP/MEC; published a paper titled “High temperature wear behavior of nano/micro B4C reinforced aluminum matrix composites fabricated by an ultrasonic cavitation – assisted solidification process”(http://www.springer.com/materials/special+types/journal/12666) in Transactions of the Indian Institute of Metals vol.70; issue.1; page.17-29; on 01/02/2017 (2016-17)
  49. Dr.N.Bose, SrP/MEC; published a paper titled “Thermal Barrier coating on IC Engine cylinder liner” (www.archivesmse.org/fulltxt.php?ICID=1229626) in Archiver of Materials Science and Engineering vol.8; issue.1; page.37-41; on 27/01/2017 (2016-17)
  50. Dr.A.Azhagurajan, ASP/MEC; published a paper titled "Graphene nanosheet as reinforcement agent in copper matrix composite by using powder metallurgy method" (http://dx.doi.org/10.1016/j.surfin.2017.01.010 http://www.sciencedirect.com/science/article/pii/S2) in Journal of Surfaces and Interfaces vol.6; page.190-196; on 27/01/2017 (2016-17)
  51. Dr.K.Jeyasubramanian, P/NST; published a paper titled “Supercapacitive performances of MnO2 nanostructures grown on hierarchical Cu nano leaves via electrodeposition” (http://www.sciencedirect.com/science/article/pii/S0013468617300440) in Electrochimica Acta vol.227; page.401-409; on 25/01/2017 (2016-17)
  52. Mrs.V.S.Benitha, SrAP/NST; published a paper titled Investigation of anti-bacterial activity and Cytotoxicity of calcium fluoride nanoparticles(http://www.sciencedirect.com/science/article/pii/S0022113916302238) in Journal of Fluorine Chemistry vol.193; page.38 – 44; on 18/01/2017 (2016-17)
  53. Dr.K.Jeyasubramanian, P/NST; published a paper titled “Investigation of anti-bacterial activity and cytotoxity of calcium fluoride nanoparticles”([http://www.sciencedirect.com/science/article/pii/S0022113916302238) in Journal of fluorine chemistry vol.193; page.38-44; on 18/01/2017 (2016-17)
  54. Dr.M.K.Marichelvam, AP/MEC; published a paper titled "Enhancing lighting resistance property of polymeric composite for aerospace applications" in 2nd International Conference on Engineering Technology, Science and Management Innovation,NITTTR, Chandigarh vol.1; issue.1; on 15/01/2017 (2016-17)
  55. Dr.M.K.Marichelvam, AP/MEC; published a paper titled "Replacement of polyethylene (LDPE) and wax coating in paper cup by alternative coatings" in 2nd International Conference on Engineering Technology, Science and Management Innovation,NITTTR, Chandigarh vol.1; issue.1; on 15/01/2017 (2016-17)
  56. Dr.M.K.Marichelvam, AP/MEC; published a paper titled "Replacement of polyethylene (LDPE) and wax coating in paper cup by alternative coatings" (ISBN: 978-81-932712-3-0) in International Journal of Engineering Technology Science and Research vol.4; issue.1; page.19 – 25; on 15/01/2017 (2016-17)
  57. Dr.M.K.Marichelvam, AP/MEC; published a paper titled "Enhancing lighting resistance property of polymeric composite for aerospace applications" (ISBN: 978-81-932712-3-0) in International Journal of Engineering Technology, Management and Applied Sciences vol.5; issue.1; page.67 – 75; on 15/01/2017 (2016-17)
  58. Dr.P.Nagaraj, SrPH/MEC; Dr.A.Vasanthanathan, ASP/MEC; published a paper titled “The influence of stiffeners on axial crushing of glass-fabric-reinforced epoxy composite shells”(http://ees.elsevier.com/jksues/; http://dx.doi.org/10.1016/j.jksues.2014.08.001) in Journal of King Saud University–Engineering Sciences vol.29; page.91-101; on 01/01/2017 (2016-17)
  59. Mr.R.Saravana Sathiya Prabhahar, SrAP/MEC; published a paper titled “Regeneration of Fuel oil from waste HDPE plastics” in International Conference on Engineering And Technology (ICET),Karpagam College of Engineering, Coimbatore vol.1; issue.1; on 16/12/2016 (2016-17)
  60. Mr.R.Saravana Sathiya Prabhahar, SrAP/MEC; published a paper titled “Temperature distribution analysis of a laboratory scale gasifier with prosopis juliflora as biomass” in International Conference on Engineering And Technology (ICET),Karpagam College of Engineering, Coimbatore vol.1; issue.1; on 16/12/2016 (2016-17)
  61. Dr.K.Jeyasubramanian, P/NST; published a paper titled “Regeneration of Fuel oil from waste HDPE plastics” in International Conference on Engineering And Technology (ICET),Karpagam College of Engineering, Coimbatore vol.1; issue.1; on 16/12/2016 (2016-17)
  62. Dr.A.Vasanthanathan, ASP/MEC; published a paper titled “Finite Element simulation of aircraft nose landing gear structure using ANSYS® WORKBENCH”(http://istam.iitkgp.ac.in/) in 61st Congress of Indian Society of Theoretical and Applied Mechanics (ISTAM) vol.1; issue.1; on 14/12/2016 (2016-17)
  63. Mr.S.Senthil Murugan, AP/MEC; published a paper titled “Investigation on the dust adsorbing ability of a newly designed bag filter using Nano technology - A review” in National conference ‘NCMED-2K16’,SFR College,Sivakasi vol.1; issue.1; on 12/12/2016 (2016-17)
  64. Mr.S.Senthil Murugan, AP/MEC; published a paper titled “Application of eco-friendly cutting fluids with nano additives in machining operation” in National conference ‘NCMED-2K16’,SFR College,Sivakasi vol.1; issue.1; on 12/12/2016 (2016-17)
  65. Dr.R.Maheswaran, SrP/MEC; published a paper titled "Single and Multi Characteristic Optimization of Machining and Material Parameters using Taguchi and Grey Relational Analysis" (http://www.icacie.com/) in ICAPIE-2016, Delhi Technological University, New Delhi vol.1; issue.1; on 09/12/2016 (2016-17)
  66. Dr.R.Maheswaran, SrP/MEC; published a paper titled Single and Multi-characteristics Optimization of Machinery and Material parameter using Taguchi and Grey Relational Analysis in International Conference on Advanced Production & Industrial Engineering,Delhi Technological University, Delhi vol.1; issue.1; on 09/12/2016 (2016-17)
  67. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled Process Capability of Friction Riveting on Wide Range of Materials (ISBN: 978-93-86256-19-5) in International Conference on ‘Advances in Materials & Manufacturing (ICAMM-2016)’,Jointly Organized by Osmania University, Hyderabad and Defence Research & Development Laboratory (DRDL), Hyderabad vol.1; page.63 – 68; on 08/12/2016 - 10/12 (2016-17)
  68. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled Issues in Turning of Aluminium Metal Matrix Composites (ISBN: 978-93-86256-19-5) in International Conference on ‘Advances in Materials & Manufacturing (ICAMM-2016)’,Jointly Organized by Osmania University, Hyderabad and Defence Research & Development Laboratory (DRDL), Hyderabad vol.1; page.589 – 592; on 08/12/2016 - 10/12 (2016-17)
  69. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled Simulation on Heat Assisted Friction Welding of Titanium Joints (ISBN: 978-93-86256-19-5) in International Conference on ‘Advances in Materials & Manufacturing (ICAMM-2016)’,Jointly Organized by Osmania University, Hyderabad and Defence Research & Development Laboratory (DRDL), Hyderabad vol.1; page.67 – 71; on 08/12/2016 - 10/12 (2016-17)
  70. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled Simulation on Friction Drilling Process of Cu2C (ISBN: 978-93-86256-19-5) in International Conference on ‘Advances in Materials & Manufacturing (ICAMM-2016)’,Jointly Organized by Osmania University, Hyderabad and Defence Research & Development Laboratory (DRDL), Hyderabad vol.2; page.72 – 76; on 08/12/2016 - 10/12 (2016-17)
  71. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled Friction Assisted Thermal Drilling (ISBN: 978-93-86256-19-5) in International Conference on ‘Advances in Materials & Manufacturing (ICAMM-2016)’,Jointly Organized by Osmania University, Hyderabad and Defence Research & Development Laboratory (DRDL), Hyderabad vol.2; page.350 – 355; on 08/12/2016 - 10/12 (2016-17)
  72. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled Recent Trends in Welding of Polymers (ISBN: 978-93-86256-19-5) in International Conference on ‘Advances in Materials & Manufacturing (ICAMM-2016)’,Jointly Organized by Osmania University, Hyderabad and Defence Research & Development Laboratory (DRDL), Hyderabad vol.2; page.366 – 373; on 08/12/2016 - 10/12 (2016-17)
  73. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled A Review on the Friction Welding of Ceramics and Composites with Metals (ISBN: 978-93-86256-19-5) in International Conference on ‘Advances in Materials & Manufacturing (ICAMM-2016)’,Jointly Organized by Osmania University, Hyderabad and Defence Research & Development Laboratory (DRDL), Hyderabad vol.2; page.374 – 378; on 08/12/2016 - 10/12 (2016-17)
  74. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled A Review on Mechanical and Microstructural Characterization of Friction Welded Joint Made of Dissimilar Steels (ISBN: 978-93-86256-19-5) in International Conference on ‘Advances in Materials & Manufacturing (ICAMM-2016)’,Jointly Organized by Osmania University, Hyderabad and Defence Research & Development Laboratory (DRDL), Hyderabad vol.2; page.389 – 593; on 08/12/2016 - 10/12 (2016-17)
  75. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled Review of Research on Characterization of Natural Fibers (ISBN: 978-93-86256-19-5) in International Conference on ‘Advances in Materials & Manufacturing (ICAMM-2016)’,Jointly Organized by Osmania University, Hyderabad and Defence Research & Development Laboratory (DRDL), Hyderabad vol.2; page.470 – 475; on 08/12/2016 - 10/12 (2016-17)
  76. Mr.S.Senthil Murugan, AP/MEC; published a paper titled “Tribological Wear Behavior and Hardness Measurement of SiC, Al2O3 Reinforced Aluminium Hybrid Composite” (https://link.springer.com/article/10.1007/s40033-016-0134-8 DOI: 10.1007/s40033-016-0134-8) in The Institution of Engineers (India): Series D vol.1; issue.1; on 06/12/2016 (2016-17)
  77. Dr.M.K.Marichelvam, AP/MEC; published a paper titled “Solving single machine scheduling problems using an Improved Crow search Algorithm” in 4th International Conference on Recent Innovation in Science, Technology and Management (ICRISTM-16),YMCA,NewDelhi vol.1; issue.1; on 03/12/2016 (2016-17)
  78. Dr.M.K.Marichelvam, AP/MEC; published a paper titled “Solving single machine scheduling problems using an Improved Crow search Algorithm”(http://www.ijetsr.com/images/short_pdf/1480605191_ymca809_ijetsr_(1).pdf]) in International Journal of Engineering Technology Science and Research vol.3; issue.12; page.8-14; on 03/12/2016 (2016-17)
  79. Dr.T.Prabaharan, P/MEC; published a paper titled “Multi-Objective Criteria in Hybrid Flow Shop Scheduling Using Improved Genetic Algorithm”(http://www.naturalspublishing.com/ ISSN: 2325 – 0399) in Applied Mathematics & Information Sciences-AMIS vol.InPress; on 01/12/2016 (2016-17)
  80. Dr.R.Rajkumar, P/MEC; published a paper titled “Hybridization of Artificial Bee Colony Algorithm with particle swarm optimization algorithm for Flexible Job Shop Scheduling” (http://www.ieeexplore.ieee.org/iel7/7578986/7582888/07583875.pdf DOI: 10.11.09/ICEETS.2016.7583875 ) in IEEE Conference Publications-International Conference on energy efficient technologies of sustainability (IEETS2016) vol.1; issue.1; on 01/12/2016 (2016-17)
  81. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Numerical Analysis of Friction Welded Titanium Joints” (DOI: 10.5604/17348412.1228630) in Journal of Achievements in Materials and Manufacturing Engineering vol.76; issue.1; page.26-29; on 01/12/2016 (2016-17)
  82. Dr.R.Rajkumar, P/MEC; published a paper titled “Evaluation of Mechanical properties of synthetic fiber reinforced polymer composites by mixture design analysis” (http://www.polymerjournals.com/pdfdownload/1233311.pdf) in Journal of Polymers & Polymer Composites vol.24; issue.7; on 01/12/2016 (2016-17)
  83. Dr.R.Rajkumar, P/MEC; published a paper titled “Analysis of ceramic coating on the exhaust valve of Diesel Engine” (http://d-info.me/ijppas.com ISSN 2320-4387) in Journal of printing, packaging & allied sciences vol.4; issue.1; page.179-189; on 01/12/2016 (2016-17)
  84. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Effect of milled B4C nanoparticles on tribological analysis, microstructure and mechanical properties of Cu-4Cr matrix produced by hot extrusion”(http://www.sciencedirect.com/science/article/pii/S1644966516301522) in Archives of Civil and Mechanical Engineering vol.17; issue.2; page.446-456; on 30/11/2016 (2016-17)
  85. Dr.R.Maheswaran, SrP/MEC; published a paper titled “Relative anti-wear evaluation of nano Garnet gear lubricant”(http://www.inderscience.com/info/ingeneral/forthcoming.php?jcode=IJSURFSE) in International Journal Surface Science and Engineering vol.InPress; on 29/11/2016 (2016-17)
  86. Dr.N.Selvakumar, SrP/MEC; published a paper titled "Effect of hybridizing and optimization of TiC on the tribological behaviour of Mg-MoS2 composites"(http://tribology.asmedigitalcollection.asme.org/article.aspx?articleid=2593002) in Journal of Tribology, ASME vol.InPress; on 17/11/2016 (2016-17)
  87. Mr.J.Thanikachalam, SrAP/MEC; published a paper titled "Dynamic simulation of MR Brake" in COMSOL User's Conference, Bangalore vol.1; issue.1; on 20/10/2016 - 21/10 (2016-17)
  88. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Microstructure, surface topography and sliding wear behaviour of titanium based coating on AISI 1040 steel by Magnetron Sputtering” (http://www.sciencedirect.com/science/article/pii/S1644966516301261) in Archives of Civil and Mechanical Engineering vol.17; issue.2; page.281-292; on 17/10/2016 (2016-17)
  89. Dr.A.Azhagurajan, ASP/MEC; published a paper titled “Synthesis of Rice Husk Nano-particles for Biodiesel production”(http://jchps.com/issues/jchps%209(4)%20181%20Vinukumar%2050%202671-2673.pdf) in Journal of Chemical and Pharmaceutical Sciences ISSN: 0974-2115 vol.9; issue.4; page.2671-2673; on 15/10/2016 (2016-17)
  90. Dr.M.K.Marichelvam, AP/MEC; published a paper titled “A hybrid discrete firefly algorithm to solve flow shop scheduling problems to minimise total flow time”(http://www.inderscienceonline.com/doi/abs/10.1504/IJBIC.2016.079572) in International Journal of Bio-Inspired Computation vol.8; issue.5; page.318-325; on 26/09/2016 (2016-17)
  91. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Tensile compressive and wear behaviour of self-lubricating sintered magnesium based composites”(http://www.journals.elsevier.com/transactions-of-nonferrous-metals-society-of-china) in Transactions of Nonferrous Metals Society of China vol.InPress; on 20/09/2016 (2016-17)
  92. Dr.R.Rajkumar, P/MEC; published a paper titled “A hybrid algorithm for minimising makespan in the permutation flow shop scheduling environment”(https://www.aijsh.com/shop/articlepdf/2016/09/1472718355100abstract.pdf) in ‘Asian Journal of Research in Social Science and Humanities’, Asian Research Consortium vol.6; issue.9; page.1239-1255; on 09/09/2016 (2016-17)
  93. Dr.R.Maheswaran, SrP/MEC; published a paper titled “A study on machining parameters for Wire Electrical Discharge Machining of Circular Contouring in Stir Cast AA6063/SiC Composites” (http://www.applied-science-innovations.com/cst-web-site/cst-1.html) in Carbon – Science and Technology, ISSN 0974-0546 vol.7; issue.4; page.16-27; on 01/09/2016 (2016-17)
  94. Dr.R.Maheswaran, SrP/MEC; published a paper titled "Synthesis and gravity driven sedimentation study on ZnS-gear lubricant oil nanofluids for gear lubricant applications" (http://www.sadgurupublications.com/Journal.aspx?PageID=9) in International Journal of Chemical Sciences, (ISSN 0972-768 X) vol.InPress; on 01/09/2016 (2016-17)
  95. Dr.R.Maheswaran, SrP/MEC; published a paper titled "A modified particle swarm optimization to improve precision of complex assembly"DOI: 10.2316/Journal.206.2016.4.206-4483 (http://www.actapress.com/Content_of_Journal.aspx?journalID=62) in International Journal of Robotics and Automation – 2016, ISSN (Hardcopy):0826-8185 vol.31; issue.4; on 01/09/2016 (2016-17)
  96. Dr.R.Maheswaran, SrP/MEC; published a paper titled “Ant colony algorithm to optimize cutting conditions and selective assembly to improve assembly precision” (http://www.tjfeonline.com/submission.php) in REVISTA TECNICA DE LA FACULTAD DE INGENIERIA UNIVERSIDAD DEL ZULIA, Technical Journal of the Faculty of Engineering, TJFE vol.38; issue.3; page.107 - 122; on 01/09/2016 (2016-17)
  97. Dr.K.Jeyasubramanian, P/NST; published a paper titled “Synthesis characterization and photo–catalytic studies of mixed metal oxides of nano Zno and SnOx”(http://www.journals.elsevier.com/materials-science-in-semiconductor-processing) in Materials Science Semiconductor processing vol.51; page.25-32; on 15/08/2016 (2016-17)
  98. Mr.S.Senthil Murugan, AP/MEC; published a paper titled “Characterization and optimization of A16061 Flyash-SiC composite in fabrication process using Taguchi method” (http://www.indianfoundry.org/) in Indian Foundry Journal (IFJ) vol.62; issue.8; page.34-38; on 10/08/2016 (2016-17)
  99. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Optimization and effect of weight fraction of MoS2 on the tribological behavior of Mg-TiC-MoS2 hybrid composites” (http://www.tandfonline.com/doi/abs/10.1080/10402004.2015.1110866) in Tribology Transactions vol.59; issue.4; page.733-747; on 01/08/2016 (2016-17)
  100. Dr.R.Maheswaran, SrP/MEC; published a paper titled Experimental analysis of Tribological properties of ultrasonically dispersed garnet nanoparticles in SN500 grade lubricating oil" (http://www.emeraldinsight.com/loi/ilt) in Industrial Lubrication and Tribology, ISSN: 0036-8792 vol.InPress; on 29/07/2016 (2016-17)
  101. Dr.A.Azhagurajan, ASP/MEC; published a paper titled “Microstructure Consolidation and Mechanical Behavior of Mg/n-TiC Composite”(http://www.journals.elsevier.com/alexandria-engineering-journal/) in Alexandria Engineering vol.55; page.2077-2086; on 28/07/2016 (2016-17)
  102. Dr.N.Bose, SrP/MEC; published a paper titled “Offset Print Analysis with Mathematical Regression Model”(http://www.actagraphica.hr/index.php/actagraphica) in ACTA-GRAPHICA vol.27; issue.2; page.15-20; on 02/07/2016 (2016-17)
  103. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Microstructure Characterization and thermal properties of AI-TiC sintered nano composites”(http://dx.doi.org/10.1016/j.applthermaleng.2016.07.005) in Applied Thermal Engineering vol.107; issue.8; page.625 – 632; on 01/07/2016 (2016-17)

2015-16

  1. Mr.S.Senthil Murugan, AP/MEC; published a paper titled “Design And Fabrication Of Over Speed Controller For Two Wheeler” (http://www.psgtech.edu/journal/ . ISSN No. 0973 – 1334) in National Journal of Technology, PSG College of Technology vol.12; issue.3; on 30/06/2016 (2015-16)
  2. Dr.N.Bose, SrP/MEC; published a paper titled "Printability analysis on gloss coated paper” (http://www.pressinstitute.in/category/vidura/) in A Journal of the Press Institute of India vol.37; issue.6; page.6-10; on 29/06/2016 (2015-16)
  3. Dr.A.Azhagurajan, ASP/MEC; published a paper titled “A Hybrid fruit fly optimization algorithm to solve the flow shop scheduling problem with multi-objectives”(http://www.inderscienceonline.com/doi/abs/10.1504/IJAIP.2017.082971) in Journal of Advance Intelligence paradigms vol.9; issue.2/3; on 28/06/2016 (2015-16)
  4. Dr.M.K.Marichelvam, AP/MEC; published a paper titled “A hybrid cuckoo search metaheuristic algorithm for solving single machine total weighted tardiness scheduling problems with sequence depended setup times”([http://www.inderscienceonline.com/doi/abs/10.1504/IJCCIA.2016.077463) in International Journal of Computational complexity and Intelligence algorithms vol.1; issue.1; page.23 – 24; on 27/06/2016 (2015-16)
  5. Dr.A.Azhagurajan, ASP/MEC; Dr.M.K.Marichelvam, AP/MEC; published a paper titled Inventory Management in a public sector using Combined Analysis Technique in 5th National Conference on Compter Science and Applications (NCCSA’16),MSEC vol.1; issue.1; on 20/06/2016 (2015-16)
  6. Dr.R.Rajkumar, P/MEC; published a paper titled “A zestful combination of ABC with GA for quenching of Job shop scheduling problem”(http://www.technicaljournalsonline.com/ijeat/) in International Journal of Advanced Engineering TechnologyE-ISSN 0976-3945 vol.3; issue.2; page.505 – 517; on 16/06/2016 (2015-16)
  7. Dr.R.Rajkumar, P/MEC; published a paper titled “A novel algorithm for solving Job-shop scheduling problem” in Mechanika vol.InPress; on 16/06/2016 (2015-16)
  8. Dr.M.K.Marichelvam, AP/MEC; published a paper titled “Application of novel harmony search Algorithm for solving hybrid flow shop scheduling problems to minimize makespan” (http://www.inderscienceonline.com/doi/abs/10.1504/IJISE.2016.077698) in International Journal of Industrial and Systems Engineering vol.23; issue.4; page.467-481; on 10/06/2016 (2015-16)
  9. Dr.K.Jeyasubramanian, P/NST; Dr.N.Selvakumar, SrP/MEC; Mrs.V.S.Benitha, SrAP/NST; published a paper titled “Fabrication of water repellent cotton fabric by coating nano particle impregnated hydrophobic additives and its characterization” (http://www.sciencedirect.com/science/article/pii/S1226086X16300260]) in Journal of Industrial & Engineering Chemistry vol.37; page.180-189; on 25/05/2016 (2015-16)
  10. Dr.R.Rajkumar, P/MEC; published a paper titled “Physicochemical and tensile properties of alkali treated new natural Cellulosic Gossipium arboreum Fiber” (http://www.tandfonline.com/doi/full/10.1080/1023666X.2016.1192815) in International Journal of Polymer Analysis and Characterization vol.OnLine; page.1-8; on 17/05/2016 (2015-16)
  11. Mr.J.Naveen, AP/MEC; published a paper titled "Design and fabrication of low cost Road Marking Machine" (http://www.ijer.in/ijer) in International Journal of Engineering Research vol.4; issue.3; on 06/05/2016 (2015-16)
  12. Mr.J.Naveen, AP/MEC; published a paper titled "Design and fabrication of low cost multipurpose kitchen equipment" (http://www.ijer.in/ijer) in International Journal of Engineering Research vol.4; issue.3; on 06/05/2016 (2015-16)
  13. Mr.G.Manoj Kumar, AP/MEC; published a paper titled “Simplified design and numerical analysis of circular cutting machine” in NCPCAEM 2016, SSN Chennai vol.1; on 06/05/2016 (2015-16)
  14. Dr.N.Bose, SrP/MEC; published a paper titled “Print Analysis on Matte – Coated paper” (http://www.pressinstitute.in/category/rind-survey/) in Journal of the Press Institute of India – Research Institute for Newspaper Development (RIND Survey) vol.37; issue.5; page.11-17; on 05/05/2016 (2015-16)
  15. Mr.J.Naveen, AP/MEC; published a paper titled “Characterization of sisal/cotton fiber woven mat reinforced polymer hybrid composites” DOI: 10.1177/1528083716648764(http://jit.sagepub.com/content/early/2016/05/04/1528083716648764.abstract) in Journal of Industrial Textiles vol.InPress; on 04/05/2016 (2015-16)
  16. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Numerical analysis on thermal drilling of aluminum metal matrix composite” (doi: 10.1063/1.4946597) in American Institute of Physics (AIP) Conference Proceedings, ISSN: 0094243X vol.1728; page.205461-4; on 02/05/2016 (2015-16)
  17. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; Mr.R.Tharmaraj, ; published a paper titled , “Finite element based simulation on friction stud welding of metal matrix composites to steel” (doi: 10.1063/1.4946607) in American Institute of Physics (AIP) Conference Proceedings, ISSN: 0094243X vol.1728; page.205561-4; on 02/05/2016 (2015-16)
  18. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; Mr.R.Tharmaraj, ; published a paper titled “Numerical investigation on friction welding of alumina / AA 6063 T6 joints” (doi: 10.1063/1.4946601) in American Institute of Physics (AIP) Conference Proceedings, ISSN: 0094243X vol.1728; page.205501-5; on 02/05/2016 (2015-16)
  19. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Numerical simulation on influence of bonding temperature in transient liquid phase bonding” (doi: 10.1063/1.4946594) in American Institute of Physics (AIP) Conference Proceedings, ISSN: 0094243X vol.1728; page.205431-4; on 02/05/2016 (2015-16)
  20. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Simulation on friction taper plug welding of AA6063-20Gr metal matrix composite” (doi: 10.1063/1.4946607) in American Institute of Physics (AIP) Conference Proceedings, ISSN: 0094243X vol.1728; page.205561-4; on 02/05/2016 (2015-16)
  21. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; Mr.R.Tharmaraj, ; published a paper titled “Production of aluminium metal matrix composites by liquid processing methods” (doi: 10.1063/1.4946609) in American Institute of Physics (AIP) Conference Proceedings, ISSN: 0094243X vol.1728; page.205581-5; on 02/05/2016 (2015-16)
  22. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Modeling of Process Parameters of Friction Stud Welding Using Fuzzy Logic System”(http://www.technicaljournalsonline.com/ijeat/VOL%20VII/IJAET%20VOL% 20VII%20ISSUE%20I%20JANUARY%20MA) in International Journal of Advanced Engineering Technology-IJAET, E-ISSN 0976-3945 vol.VII; issue.I; page.413-417; on 02/05/2016 (2015-16)
  23. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Experimental investigations on the densification and deformation behavior of Al-TiB2 composite preforms” (http://link.springer.com/article/10.1007%2Fs12666-015-0622-9) in Transactions of the Indian Institute of Metals vol.69; issue.5; page.1059-1068; on 01/05/2016 (2015-16)
  24. Dr.T.Prabaharan, P/MEC; published a paper titled "Modified Improved Genetic Algorithm to minimize Tri-objective functions in a Textile Mill" in International Journal of Industrial and Systems Engineering vol.InPress; on 30/04/2016 (2015-16)
  25. Dr.M.K.Marichelvam, AP/MEC; published a paper titled "Hybrid bat algorithm for flow shop scheduling problems"(http://www.inderscienceonline.com/doi/abs/10.1504/IJMOR.2016.077560) in International Journal of Mathematics in operational research vol.9; issue.1; page.125 – 138 ; on 26/04/2016 (2015-16)
  26. Dr.M.K.Marichelvam, AP/MEC; published a paper titled "Performance comparison of cuckoo search algorithm to solve the hybrid flow shop scheduling problem with makespan criterion" (http://www.igi-global.com/article/) in International Journal of Swarm Intelligence Research vol.7; issue.2; page.1-14; on 26/04/2016 (2015-16)
  27. Dr.N.Selvakumar, SrP/MEC; published a paper titled "Workability Behaviour of Fe-C-Mn Sintered Composites" (http://link.springer.com/article/10.1007/s12666-015-0628-3) in Transactions of the Indian Institute of Metals vol.69; issue.5; page.1137 – 1139; on 26/04/2016 (2015-16)
  28. Dr.A.Azhagurajan, ASP/MEC; published a paper titled "Reduction of spare parts inventory through combined analysis technique(CAT)-A case study in a public sector company in India" (http://www.inderscience.com/info/ingeneral/forthcoming.php?jcode=ijsom) in International Journal of services and operations vol.InPtress; on 24/04/2016 (2015-16)
  29. Dr.M.K.Marichelvam, AP/MEC; published a paper titled “Reduction of spare parts inventory through combined analysis technique (CAT) – A case study in a public sector company in India” (http://www.inderscience.com/info/ingeneral/forthcoming.php?jcode=ijsom) in International Journal of services and operations vol.InPress; on 24/04/2016 (2015-16)
  30. Dr.T.Prabaharan, P/MEC; published a paper titled "Integrated Reliablilty and Maintenance analysis in selecting a Machine – A LCC based approach" ([ISSN 0973 - 4562]) in International Journal of Applied Engineering Reseach vol.11; issue.3; on 12/04/2016 (2015-16)
  31. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Influence of Nano ZrC content on tribological analysis, microstructure and mechanical properties of Cu-4Cr matrix composites produced by hot extursion"(http://www.sciencedirect.com/science/article/pii/S1644966516300085 doi:10.1016/j.acme.2016.03.007) in Archives of Civil and Mechanical Engineering vol.16; issue.3; page.573 – 552; on 11/04/2016 (2015-16)
  32. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Influence of Alumina Reinforcement on nano–Hydroxyapatite/Bio- Polymer Composite for Biomedical applications” (http://www.tandfonline.com/doi/abs/10.1080/1023666X.2016.1177702?journalCode=gpac20) in International Journal of Polymer Analysis and Characterization vol.21; issue.6; page.554 - 562; on 11/04/2016 (2015-16)
  33. Mr.J.Thanikachalam, SrAP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled “Optimised design for magnetorheological brake using DOE methods”(http://dx.doi.org/10.1504/IJETP.2015.074163) in International Journal of Energy Technology and Policy vol.11; issue.4; page.394 – 406 ; on 02/04/2016 (2015-16)
  34. Dr.N.Bose, SrP/MEC; published a paper titled "An Experimental Review on Processing of Polypropylene Composites by Compression Molding." in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  35. Dr.N.Bose, SrP/MEC; published a paper titled "Print Analysis on Gloss Coated Paper by using Offset Printing Process" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  36. Dr.N.Bose, SrP/MEC; published a paper titled "Thermal Barrier Coating on I.C Engine Cylinder Liner" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  37. Dr.N.Bose, SrP/MEC; published a paper titled "Non-Contact Surface Roughness Measurement of Engineering Surface by the application of Digital Image Magnification" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  38. Dr.N.Bose, SrP/MEC; published a paper titled "Reduction of Nox using Selective Catalytic Reduction in a Bio-Fuelled C.I Engine" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  39. Mr.M.Anandhan, SlAP/MEC; published a paper titled "Study of Emission Characteristics of Plastic Waste Incineration" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  40. Mr.M.Anandhan, SlAP/MEC; published a paper titled "Identification of New Sources of Natural Dye using Non-Traditional Techniques for Inkjet Printing and its Environmental Impacts." in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  41. Mr.M.Anandhan, SlAP/MEC; published a paper titled "Investigation and Analysis on Bulk Scale Application of Natural Dyes for Hand Loom and Power Loom Process" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  42. Dr.P.Nagaraj, SrPH/MEC; published a paper titled "Stress Evaluation of Thermal Coating for Nano composites of CSZ and Sialon Under Thermo-mechanical Loading Condition Stress Evaluation of Thermal Coating for Nano composites of CSZ and Sialon Under Thermo-mechanical Loading Condition" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  43. Dr.P.Nagaraj, SrPH/MEC; published a paper titled "Preparation and Characterization of Nanomagnetic Fluid for Automotive Applications" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  44. Dr.P.Nagaraj, SrPH/MEC; published a paper titled "Finite Element Analysis of FGM Cylindrical Shell Subjected to Internal Pressure and Buckling" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  45. Dr.P.Nagaraj, SrPH/MEC; published a paper titled "Energy Auditing: A Case Study in Educational Institution" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  46. Dr.P.Nagaraj, SrPH/MEC; published a paper titled "Electromagnetic Analysis of Magneto-Rheological Brakes" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  47. Dr.P.Nagaraj, SrPH/MEC; published a paper titled "Effect of Graphene as Anti-Settling Agent for Magnetorheological Fluid" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  48. Dr.P.Nagaraj, SrPH/MEC; published a paper titled "Improving Crack Resistivity in Al Alloy Pressure Vessels BY FSW" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  49. Dr.P.Nagaraj, SrPH/MEC; published a paper titled "Numerical Studies on Biomass Gasification" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  50. Dr.A.Azhagurajan, ASP/MEC; published a paper titled "An Experimental Study of Green Composites for Flash Powder in Fireworks Manufacturing" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  51. Dr.A.Azhagurajan, ASP/MEC; published a paper titled "Study on Nano Scale Pyrotechnic Star Chemicals in Aerial Fireworks Manufacturing" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  52. Dr.A.Azhagurajan, ASP/MEC; published a paper titled "Removal of Mercury from Effluent solution of using Banana corm and Neem leaves activated charcoal" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  53. Dr.A.Azhagurajan, ASP/MEC; published a paper titled "Blending boron with fireworks composition to minimize the hazardous nature" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  54. Dr.A.Azhagurajan, ASP/MEC; published a paper titled "Preparation and Characterization of Rice Husk Nano-Particles for Biodiesel Production" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  55. Dr.A.Azhagurajan, ASP/MEC; published a paper titled "Fabrication and Tribological Behaviour of the Copper-Silicon carbide Composite along with Graphite" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  56. Dr.A.Azhagurajan, ASP/MEC; published a paper titled "Multi response optimization of Sintering behavior of Mg/TiC composite using Taguchi method with grey relation analysis" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  57. Dr.A.Azhagurajan, ASP/MEC; published a paper titled "A Hybrid Fruit Fly Algorithm for uncertain Hybrid Flow Shop Scheduling" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  58. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled "Regression Modeling of Friction Welding of Aluminum Silicon Carbide Composite" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  59. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled "Numerical Analysis of Friction Welded Titanium Joints." in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  60. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled "Numerical Analysis on Thermal Drilling of Copper" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  61. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled "Influence of Interlayer Thickness in Transient Liquid Phase Bonding of Graphite and Copper" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  62. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled "Thermal Modelling of Friction Taper Plug Welding using Ansys Software" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  63. Dr.A.Vasanthanathan, ASP/MEC; published a paper titled "Micromechanics Calculation of CNT Enhanced Carbon Fabric Reinforced Epoxy Composite Structure" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  64. Dr.A.Vasanthanathan, ASP/MEC; published a paper titled "Fabrication of Composite Pipes using Centrifugal Casting" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  65. Dr.A.Vasanthanathan, ASP/MEC; published a paper titled "Finite Element Modelling of Self-Healing Composite Structure" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  66. Dr.A.Vasanthanathan, ASP/MEC; published a paper titled "Correlation of CFRP and AA7075 Aircraft Wing Box Structure using FEM" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  67. Dr.A.Vasanthanathan, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled "Condition Monitoring of CFRP Composite Structure Under Static and Dynamic Loading" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  68. Mr.N.Vasiraja, SrAP/MEC; published a paper titled "Enriched Performance of FML GLARE 3 under Bending Loading Conditions – A Numerical Analysis" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  69. Mr.N.Vasiraja, SrAP/MEC; published a paper titled "Finite Element Analysis of FGM Cylindrical Shell Subjected to Internal Pressure and Buckling" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  70. Mr.J.Thanikachalam, SrAP/MEC; published a paper titled "Effect of Graphene as Anti-Settling Agent for Magnetorheological Fluid" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  71. Mr.J.Thanikachalam, SrAP/MEC; published a paper titled "Preparation and Characterization of Nanomagnetic Fluid for Automotive Applications" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  72. Mr.J.Thanikachalam, SrAP/MEC; published a paper titled "Electromagnetic Analysis of Magneto-Rheological Brakes" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  73. Mr.J.Thanikachalam, SrAP/MEC; published a paper titled "Stress Evaluation of Thermal Coating for Nano composites of CSZ and Sialon Under Thermo-mechanical Loading Condition" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  74. Mr.R.Saravana Sathiya Prabhahar, SrAP/MEC; published a paper titled "Numerical Studies on Biomass Gasification" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  75. Mr.R.Saravana Sathiya Prabhahar, SrAP/MEC; published a paper titled "Enhancing Bio-Gas Production from Kitchen Waste using BSA-Iron Oxide Nanoparticles in Miniature Level Bio-Reactor" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  76. Mrs.V.S.Benitha, SrAP/NST; published a paper titled "Formulation and Evaluation of Tio2.Fe2o3 Nanopaint." in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  77. Mr.K.Maheswaran, SrAP/MEC; published a paper titled "Mitigating the effect of harmful gases in pyro chemical disposal by incineration method." in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  78. Mr.K.Maheswaran, SrAP/MEC; published a paper titled "Design and Development of Engineered Fire Suppression System" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  79. Mr.K.Maheswaran, SrAP/MEC; published a paper titled "Safe Disposal of E-Waste and Recovery of heavy metals (Pb, Cd, Cu) by Electrochemical method" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  80. Mr.K.Maheswaran, SrAP/MEC; published a paper titled "Study of Emission Characteristics of Plastic Waste Incineration" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  81. Mr.S.Senthil Murugan, AP/MEC; published a paper titled "Preparation and Characterization of Nanomagnetic Fluid for Automotive Applications" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  82. Mr.S.Senthil Murugan, AP/MEC; published a paper titled "Processing and Characterization of LM30 Aluminium Matrix Composite Reinforced with Graphite" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  83. Mr.S.Senthil Murugan, AP/MEC; published a paper titled "Identification of Ultrasonic Frequency for Water Mist Generation using Piezoelectric Transducer" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  84. Mr.S.Senthil Murugan, AP/MEC; published a paper titled "Work Safety Analysis of Work Postures in Textile Industry using Various Ergonomic Assessment Tools" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  85. Mr.M.Sankaranarayanan, AP/MEC; published a paper titled "Preparation and characterization of Stir Cast – Tungsten Graphite reinforced with Aluminium Metal Matrix Composites" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  86. Dr.M.K.Marichelvam, AP/MEC; published a paper titled "A hybrid fruit fly algorithm for uncertain hybrid flow shop scheduling" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  87. Dr.M.K.Marichelvam, AP/MEC; published a paper titled "An Experimental Study of Green Composites for Flash Powder in Fireworks Manufacturing." in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  88. Dr.M.K.Marichelvam, AP/MEC; published a paper titled "Development of Zinc Oxide and reduced size of Na2O3 Nano Crystalline Particles as a new type of fire suppressant" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  89. Mr.C.Bala Manikandan, AP/MEC; published a paper titled "A study on Magnetic Field Assisted Laser Percussion Drilling and its Effect on Surface Integrity" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  90. Mr.J.Naveen, AP/MEC; published a paper titled "Impact on the summation of compatibilizer and Graphene oxide on the properties of HDPE and LDPE Nanocomposites." in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  91. Mr.J.Naveen, AP/MEC; published a paper titled "Effect of Cloisite 30B on IIR Matrix in presence and absence of compatibilizer" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  92. Mr.J.Naveen, AP/MEC; published a paper titled "Design and analysis of Salt Collector" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  93. Dr.S.P.Asok, SrP/MEC; published a paper titled "Thermal Optimization of Safe and Effective Pyrotechnic Compositions" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  94. Dr.S.P.Asok, SrP/MEC; published a paper titled "Study on Safety Characteristics of Man-Made and Machine-Made Pyrotechnic Fuses" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  95. Dr.S.P.Asok, SrP/MEC; published a paper titled "Heat Transfer and Pressure Loss Analysis of Pin Fin and Dimples Arrangement in Gas Turbine Blade Cooling" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  96. Dr.R.Maheswaran, SrP/MEC; published a paper titled "Advancement in Natural Fibre Composites – Review" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  97. Dr.R.Maheswaran, SrP/MEC; published a paper titled "Density Determination of Expanded Polystyrene/Epoxy Sandwich Composites" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  98. Dr.R.Maheswaran, SrP/MEC; published a paper titled "A Study on Machining Parameters for Wire Electrical Discharge Machining of Stir Cast AA6063/SiC Composites" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  99. Dr.R.Maheswaran, SrP/MEC; published a paper titled "Predection of Elastic Properties of E-Glass/Epoxy Composites using Analytical Models" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  100. Dr.R.Maheswaran, SrP/MEC; published a paper titled "MRI Brain Image Classification and Segmentation using PNN and Meta Heuristic Algorithms" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  101. Dr.R.Maheswaran, SrP/MEC; published a paper titled "Multiple Performance Characteristics Optimization of Wire Electric Discharge Machine Setting Parameters for AA6063/SiC Composites." in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  102. Dr.R.Maheswaran, SrP/MEC; published a paper titled "Optimization of Fin Parameters for Various Profile Areas using Genetic Algorithm" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  103. Dr.R.Maheswaran, SrP/MEC; published a paper titled "CFD Analysis of Aerofoil using Dimples and Prevent Radar Signals using Stealth Technology" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  104. Dr.R.Maheswaran, SrP/MEC; published a paper titled "Experimental Studies on the Roles of Nanoscale Lubricant Additives at the Rubbing Interface of Machine Elements: A Review." in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  105. Dr.R.Maheswaran, SrP/MEC; published a paper titled "Online Computer-to-Plate Printer Waste Neutralizer" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  106. Dr.K.Jeyasubramanian, P/NST; published a paper titled "Fabrication of thin film electrodes using GO for super capacitor applications" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  107. Dr.K.Jeyasubramanian, P/NST; published a paper titled "Starch Bioplastic Film as an Alternative Food Packaging Material" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  108. Dr.K.Jeyasubramanian, P/NST; published a paper titled "Surface Morphology and Topographical studies of Fluorine doped Tin oxide as Transparent Conducting Film" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  109. Dr.K.Jeyasubramanian, P/NST; published a paper titled "Synthesis and characterization of NiO-ZnO nanocomposite by a cost efficient self-combustion technique" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  110. Dr.K.Jeyasubramanian, P/NST; published a paper titled "Formulation and Evaluation of Tio2.Fe2o3 Nanopaint" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  111. Dr.K.Jeyasubramanian, P/NST; published a paper titled "Fabrication of Dye sensitized solar cell using chemically tuned CuO nanoparticles prepared by Gel combustion method" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  112. Dr.K.Jeyasubramanian, P/NST; published a paper titled "Preparation of Biomimetic superhydrophobic coating on mild steel" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  113. Dr.K.Jeyasubramanian, P/NST; published a paper titled "Photo-catalytic and anti-microbial activities of Nano porous Magnesium Oxide prepared by Gel combustion method" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  114. Dr.K.Jeyasubramanian, P/NST; published a paper titled "Evaluation of soil pollution nature of particulate pollutants emanating from cement industry" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  115. Dr.N.Selvakumar, SrP/MEC; published a paper titled "Processing of TiC reinforced - Aluminium Composites through P/M techniques" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  116. Dr.N.Selvakumar, SrP/MEC; published a paper titled "Wear behaviour of Magnesium based Composites reinforced with TiC" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  117. Dr.N.Selvakumar, SrP/MEC; published a paper titled "Predection of Elastic Properties of E-Glass/Epoxy Composites using Analytical Models" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  118. Dr.N.Selvakumar, SrP/MEC; published a paper titled "Statistical Analysis and Optimization of High Temperature Wear Behavior of Sintered Ti-Al-V-B4C Composites using Factorial Design" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  119. Dr.N.Selvakumar, SrP/MEC; published a paper titled "Investigation of Wear Behavior of Magnesium based Nanocomposites through Powder Metallurgy" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  120. Dr.N.Selvakumar, SrP/MEC; published a paper titled "Synthesis and characterization of NiO-ZnO nanocomposite by a cost efficient self-combustion technique" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  121. Dr.N.Selvakumar, SrP/MEC; published a paper titled "Effect of h-BN Solid Nano Lubricant on the Dry Sliding Wear Behaviour of Al-B4C Nanocomposites" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  122. Dr.N.Selvakumar, SrP/MEC; published a paper titled "Dry Sliding Friction Analysis of Cu - Cr Matrix Alloy Reinforced with ZrC Nano Particle using RSM" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  123. Dr.N.Selvakumar, SrP/MEC; published a paper titled "Experimental Analysis on Wear Rate of Coated and Uncoated Single Point Cutting Tool in Turning Process" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  124. Dr.N.Selvakumar, SrP/MEC; published a paper titled "Review on Deposition, Tribological and Mechanical Properties of Thin Film Coating" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  125. Dr.T.Prabaharan, P/MEC; published a paper titled "Multi-Objective Criteria in Hybrid Flow Shop Scheduling using Improved Genetic Algorithm" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  126. Dr.T.Prabaharan, P/MEC; published a paper titled "Application of Scenario Based FMEA for the Maintenance of Food Grains Processing Machine" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  127. Dr.T.Prabaharan, P/MEC; published a paper titled "Multi Objective Flexible Jobshop Scheduling Problem using Heuristic Algorithm" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  128. Dr.T.Prabaharan, P/MEC; published a paper titled "Corrosion Inhibition in Mild Steel by Anodizing and the Extract of Emblica Officinalis" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  129. Dr.T.Prabaharan, P/MEC; published a paper titled "Fabrication of Lumbar Vertebrae by Polymer using Rapid Prototyping" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  130. Dr.T.Prabaharan, P/MEC; published a paper titled "Design and Development of Engineered Fire Suppression System" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  131. Dr.T.Prabaharan, P/MEC; published a paper titled "Safe Disposal of E-Waste and Recovery of heavy metals (Pb, Cd, Cu) by Electrochemical method" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  132. Dr.T.Prabaharan, P/MEC; published a paper titled "Identification of New Sources of Natural Dye using Non-Traditional Techniques for Inkjet Printing and its Environmental Impacts" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  133. Dr.T.Prabaharan, P/MEC; published a paper titled "Investigation and Analysis on Bulk Scale Application of Natural Dyes for Hand Loom and Power Loom Process" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  134. Dr.T.Prabaharan, P/MEC; published a paper titled "Mitigating the effect of harmful gases in pyro chemical disposal by incineration method" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  135. Dr.R.Rajkumar, P/MEC; published a paper titled "Natural Fibre Characterization: A Concise Review" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  136. Dr.R.Rajkumar, P/MEC; published a paper titled "Evaluation of Mechanical Properties of Hybrid Polymer Composites" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  137. Dr.R.Rajkumar, P/MEC; published a paper titled "Mechanical and Wear Behaviour of Aluminium LM6 based Metal Matrix Reinforced with Silicon Nitride" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  138. Dr.R.Rajkumar, P/MEC; published a paper titled "Investigation on Mechanical Properties of Alkaline Treated Coir Fibre Reinforced Polyester Composites" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  139. Dr.R.Rajkumar, P/MEC; published a paper titled "Flame Retardant Technique applied in Natural Composite Materials" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  140. Dr.R.Rajkumar, P/MEC; published a paper titled "A Flexible Job-Shop Scheduling Problem Solving by using an Opposite Genetic Algorithm" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  141. Dr.R.Rajkumar, P/MEC; published a paper titled "Real Coded Genetic Algorithm for Flow Shop Scheduling Problems to Minimize Makespan as Objective" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  142. Dr.R.Rajkumar, P/MEC; published a paper titled "Optimization of Drilling Parameters on Surface Roughness of Mild Steel using AHP" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  143. Dr.R.Rajkumar, P/MEC; published a paper titled "A Study on the Metal Honeycomb Thin Walled Hexagonal Structure Crushing under Quasi Static Loading – A Review" in International Conference on Fascinating Advancements in Mechanical Engineering (FAME’16),MSEC vol.1; issue.1; on 18/03/2016 - 19/03 (2015-16)
  144. Mr.S.Senthil Murugan, AP/MEC; published a paper titled Work safety analysis and Risk identification of work posture using 3DSSPP Software in 5th National Conference on Compter Science and Applications (NCCSA’16),MSEC vol.1; issue.1; on 05/03/2016 (2015-16)
  145. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Influence of nano ZrC content on tribological analysis, microstructure and mechanical properties of Cu-4Cr matrix composites produced by hot extrusion”(http://www.sciencedirect.com/science/article/pii/S1644966516300085) in Archives of Civil and Mechanical Engineering vol.InPress; on 05/03/2016 (2015-16)
  146. Dr.K.Jeyasubramanian, P/NST; Dr.N.Selvakumar, SrP/MEC; published a paper titled “Photochromic Effect of Copper Doper Nano Silver Chloride Impregnated Polyvinyl Alcohol thin Film”(http://benthamscience.com/journals/micro-and-nanosystems/volume/7/issue/2/page/68/) in Micro and Nanosystems vol.7; issue.2; page.68-73; on 01/03/2016 (2015-16)
  147. Dr.K.Jeyasubramanian, P/NST; Dr.N.Selvakumar, SrP/MEC; published a paper titled “Enhancement in growth rate and productivity of spinach grown in hydroponics with iron oxide nano particles” (http://pubs.rsc.org/en/Journals/JournalIssues/RA?e=1) in Journal of RSC Advances vol.6; issue.19; page.15451-15459; on 04/02/2016 (2015-16)
  148. Dr.R.Rajkumar, P/MEC; published a paper titled "• Minimizing Make span in Job Shop Scheduling Problem using Generic Algorithm" in Applied Mechanics and Materials vol.813 – 814; page.1183 – 1187; on 02/02/2016 (2015-16)
  149. Dr.R.Rajkumar, P/MEC; published a paper titled “Physicochemical properties of alkali treated new cellulosic fiber from cotton shell”[DOI: 10.1080/102366X.2016.1160509] (http://www.tandfonline.com/doi/abs/10.1080/1023666X.2016.1160509?journalCode=gpac20#.VuaGMJx97IU) in International Journal of Polymer Analysis and Characterization vol.24; issue.4; page.359-364; on 01/02/2016 (2015-16)
  150. Dr.N.Selvakumar, SrP/MEC; published a paper titled "Optimizing the wear behavior of copper hybrid nanocomposites using grey relational analysis”(http://www.scibulcom.net/) in Journal of Balkan Tribological Association vol.InPress; on 01/02/2016 (2015-16)
  151. Dr.K.Jeyasubramanian, P/NST; published a paper titled “Corrosion protection studies of sputtered aluminum thin film coated by graphene/polyvinyl alcohol nanocomposite” in 17th International Conference on Asian Pacific Corrosion Control (APCCC),IITBombay vol.1; issue.1; on 28/01/2016 - 30/01 (2015-16)
  152. Dr.K.Jeyasubramanian, P/NST; published a paper titled "Corrosion Protection Studies of Sputtered Aluminium thin film coated by Graphene/Polyvinyl alcohol nano composite" in 17th Asian Pacific Corrosion Control Conference vol.1; issue.1; on 27/01/2016 - 30/01 (2015-16)
  153. Dr.M.K.Marichelvam, AP/MEC; published a paper titled "Solving multi-criteria scheduling problems in a furniture manufacturing company using a hybrid fruit fly optimization Algorithm" in 12th International Conference on Industrial Engineering (ICIE-2016), Kharazmi University, Iran vol.1; issue.1; page.6535; on 25/01/2016 - 26/01 (2015-16)
  154. Dr.N.Bose, SrP/MEC; published a paper titled “Determination of the Deviation and Variations of print quality from the OK Print in Offset and Digital process for Eco friendly printing” (http://www.aensiweb.net/AENSIWEB/jasr/jasr/2015/December/109-116.pdf) in Journal of Applied Sciences Research vol.11; issue.23; page.109-116; on 02/01/2016 (2015-16)
  155. Dr.A.Vasanthanathan, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled Micromechanical Modelling of Carbon Fabric Reinforced Epoxy Composite Structure, [60-istam-sm-fp-131] in 60th Congress of the Indian Society of Theoretical and Applied Mechanics (ISTAM),MNIT Jaipur vol.1; issue.1; page.1-5; on 16/12/2015 - 19/12 (2015-16)
  156. Dr.A.Vasanthanathan, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled Finite Element Modelling of Aircraft CFRP Wing Box Structure Using ANSYS®15.0, [60-istam-sm-fp-132] in 60th Congress of the Indian Society of Theoretical and Applied Mechanics (ISTAM),MNIT, Jaipur vol.1; issue.1; page.1-6; on 16/12/2015 - 19/12 (2015-16)
  157. Dr.A.Vasanthanathan, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled Experimental and Finite Element Investigations of Thin-Walled GFRP Shells under Axial Impact, [60-istam-sm-fp-130] in 60th Congress of the Indian Society of Theoretical and Applied Mechanics (ISTAM),MNIT Jaipur vol.1; issue.1; page.1-9; on 16/12/2015 (2015-16)
  158. Dr.K.Jeyasubramanian, P/NST; published a paper titled “Photo-Catalytic degradation of methyl violet dye using zinc oxide nano particles prepared by novel precipitation method and its anti-bacterial activities”(https://www.researchgate.net/publication/281257593]) in Journal of Water Process Engineering [DOI: 10.1016/j.jwpe.2015.08.007] vol.8; page.35-44; on 14/12/2015 (2015-16)
  159. Mr.N.Naganambi, AP/MEC; published a paper titled “Fabrication and Identification of optimal blend of SiR and PU for cables using PSO” in 4TH International Conference on Swarm, Evolutionary and Memetic Computing Conference (SEMCCO) & Fuzzy And Neural Computing Conference (FANCCO), SRM University, Chennai. vol.1; issue.1; on 01/12/2015 (2015-16)
  160. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Experimental and prediction of lubricating wear of sintered Ti-6AL-4V composite reinforced with nano B4C particle by artificial neural network” in RFBMC – 2015,Sree Sowdambika College of Engineering, Aruppukottai vol.1; issue.1; on 27/11/2015 - 28/11 (2015-16)
  161. Dr.N.Bose, SrP/MEC; published a paper titled “Optimization of Biofuel Blends and Compression Ratio of a Diesel engine fueled with calophyllum inophyllum oil Methyl ester” DOI: 10.1007/s13369-015-1942-0(http://link.springer.com/article/10.1007%2Fs13369-015-1942-0) in Arabian Journal for Science and Engineering vol.InPress; on 04/11/2015 (2015-16)
  162. Dr.A.Vasanthanathan, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled “Anisogrid cylindrical CFRP shell structures under static axial compression-Experiments & Finite Element Modeling” (http://serc.res.in/jose/index.html) in Journal of Structural Engineering vol.42; issue.4; page.314-323; on 23/10/2015 (2015-16)
  163. Dr.R.Rajkumar, P/MEC; published a paper titled "Mechanical characterization of low cost natural fiber particles reinforced with polymer composites" in Applied Mechanics and Materials vol.813 – 814; page.79 – 83; on 15/10/2015 (2015-16)
  164. Dr.T.Prabaharan, P/MEC; published a paper titled “Multi objective criteria in flow shop scheduling with sequence dependent setup time”(http://www.academicscience.co.in/) in International Journal of Computer & Mathematical Science (IJCMS) vol.1; issue.Special ; on 01/10/2015 (2015-16)
  165. Dr.M.K.Marichelvam, AP/MEC; published a paper titled “A fruit fly optimization algorithm for flywheel design” in National Conference on Trends & Innovation in Civil & Mechanical (NCTICM’2K15),Vel Tech Multi Tech Dr.Rangarajan Dr.Sakunthala Engineering College, Chennai vol.1; issue.1; on 26/09/2015 (2015-16)
  166. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Effect of hybridizing MoS2 on the tribological behavior of Mg-TiC composites”(http://www.springer.com/materials/special+types/journal/12666) in Transactions of the Indian Institute of Metals vol.68; issue.5; page.911-925; on 23/09/2015 (2015-16)
  167. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Simulation on Friction Welding Of MgAZ31 / AA 6061 T6 Joints”(http://www.inase.org/library/2015/zakynthos/bypaper/.../COMPUTERS-86.pdf) in Recent Advances in Computer Science, Recent Advances in Computer Engineering Series, ISSN: 1790-5109 vol.32; page.524-528; on 20/09/2015 (2015-16)
  168. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Numerical Analysis in Friction Drilling Of AISI 1020 Steel and AA 6061 T6 Alloy”(http://www.inase.org/library/2015/zakynthos/bypaper/ENG/ENG-21.pdf) in Recent Advances in Environmental and Earth Sciences and Economics, Energy, Environmental and Structural Engineering Series, ISSN: 2227‐4359 vol.39; page.145-149; on 20/09/2015 (2015-16)
  169. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Computer Simulation of Impact dynamics of Tooth Structure”(http://www.inase.org/library/l2015/zakynthos/bypaper/ENG/ENG-21.pdf) in Recent Advances in Environmental and Earth Sciences and Economics, Energy, Environmental and Structural Engineering Series, ISSN: 2227‐4359 vol.39; page.141-144; on 20/09/2015 (2015-16)
  170. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Automatic Metal Surface Inspection in Steel Rolling Mills”(www.inase.org/library/2015/zakynthos/bypaper/ENG/ENG-19.pdf) in Recent Advances in Environmental and Earth Sciences and Economics, Energy, Environmental and Structural Engineering Series, ISSN: 2227‐4359 vol.39; page.133-140; on 20/09/2015 (2015-16)
  171. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “An Overview of Direct Digital Manufacturing” (www.inase.org/library/2015/zakynthos/bypaper/ENG/ENG-18.pdf) in Recent Advances in Environmental and Earth Sciences and Economics, Energy, Environmental and Structural Engineering Series, ISSN: 2227‐4359, vol.39; page.125-132; on 20/09/2015 (2015-16)
  172. Dr.N.Bose, SrP/MEC; published a paper titled “Reduction of pollutant for SI Engine using Argon and Oxyhydrogen”(http://stmjournals.com/tech/index.php?journal=JoAEA&page=article&op=view&path[]=861) in Journal of Automobile Engineering and Applications, vol.2; issue.2; page.44-49; on 12/08/2015 (2015-16)
  173. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Effect of high temperature wear behaviour of sintered Ti – 6Al-4V reinforced with nano B4C particle”(http://www.springer.com/materials/special+types/journal/12666) in Journal of Transactions of the Indian Institute of Metals vol.69; issue.6; page.1267-1276; on 28/07/2015 (2015-16)
  174. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; Mr.R.Tharmaraj, ; published a paper titled “One Dimensional Thermal Model for Heat Flow in Friction Stud Welding”(http://stmjournals.com/tech/index.php?journal=JoTEA&page=article&op=view&path[]=879) in Journal of Thermal Engineering and Applications vol.2; issue.2; page.22 – 27; on 23/07/2015 (2015-16)
  175. Dr.M.K.Marichelvam, AP/MEC; Dr.A.Azhagurajan, ASP/MEC; published a paper titled “Minimization of total hardness in hybrid flowshop scheduling problems with sequence dependent setup times using a discrete firefly algorithm” (http://www.inderscience.com/jhome.php?jcode=ijor) in International Journal of Operational Research vol.InPress; on 07/07/2015 (2015-16)
  176. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Thermo Mechanical Modelling of Friction Welding using Finite Element Method”(http://www.ejaet.com/PDF/2-7/EJAET-2-7-29-32.pdf) in European Journal of Advances in Engineering and Technology vol.2; issue.7; page.29-32; on 02/07/2015 (2015-16)
  177. Mr.J.Thanikachalam, SrAP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled “Finite Element Simulation of Magneto Rheological Brake“ (http://www.ripublication.com/ijaer.htm) in International Journal of Applied Engineering Research ISSN : 0973-4562 vol.10; issue.20; on 01/07/2015 (2015-16)

2014-15

  1. Dr.P.Nagaraj, SrPH/MEC; Dr.A.Vasanthanathan, ASP/MEC; published a paper titled “Finite Element Studies on Lattice Conical Shell Structures Using LSDyna®”(doi:10.4028/www.scientific.net/AMM.787.275) in Applied Mechanics and Materials vol.787; issue.1; page.275 - 279; on 24/06/2015 (2014-15)
  2. Dr.P.Nagaraj, SrPH/MEC; Dr.A.Vasanthanathan, ASP/MEC; published a paper titled “Finite Element Modelling and Simulation of Train Car body Structure using LS-Dyna®”(doi:10.4028/www.scientific.net/AMM.787.270) in Applied Mechanics and Materials vol.787; issue.1; page.270-274; on 24/06/2015 (2014-15)
  3. Dr.P.Nagaraj, SrPH/MEC; published a paper titled “Finite element model updating of a space vehicle first stage motor based on experimental test results” doi:10.1016/j.ast.2015.06.014 (http://www.sciencedirect.com/science/article/pii/S1270963815001911) in Aerospace Science and Technology vol.45; page.422 – 430; on 13/06/2015 (2014-15)
  4. Mrs.V.S.Benitha, SrAP/NST; published a paper titled “Green Synthesis and Characterisation of Iron Oxide Nanoparticles from the Leaf Extract of Piper betle” -ISSN 2319-7730 (http://www.discovery.org.in/science/current_issue/v16/n50/A3.pdf) in Indian Journal of Science vol.16; issue.50; page.30-33; on 13/06/2015 (2014-15)
  5. Mr.M.Anandhan, SlAP/MEC; published a paper titled "Design and development of Eco-friendly dyeing machine"-ISSN 0973-4562(http://www.ripublication.com/ijaer_spl/ijaerv10n39spl_97.pdf) in International Journal of Applied Engineering Research vol.10; issue.39; page.29956 – 29959; on 30/05/2015 (2014-15)
  6. Mr.M.Anandhan, SlAP/MEC; published a paper titled "Investigation for comparative assertion of synthetic dye and natural dye using life cycle approach "-ISSN 0973-4562 (http://www.ripublication.com/ijaer_spl/ijaerv10n39spl_120.pdf) in International Journal of Applied Engineering Research vol.10; issue.39; page.30090 – 30094; on 30/05/2015 (2014-15)
  7. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled "Simulation of the effect of Standoff Distance on Impact dynamics of tooth structure – "-ISSN 0973-4562(http://www.ripublication.com/ijaer_spl/ijaerv10n39spl_21.pdf) in International Journal of Applied Engineering Research vol.10; issue.39; page.29528 – 29530; on 30/05/2015 (2014-15)
  8. Mr.R.Saravana Sathiya Prabhahar, SrAP/MEC; published a paper titled "A study on Bio-oil produced from paper waste using pyrolysis process – "-ISSN 0973-4562(http://www.ripublication.com/ijaer_spl/ijaerv10n39spl_21.pdf) in International Journal of Applied Engineering Research vol.10; issue.39; page.29550 – 29555; on 30/05/2015 (2014-15)
  9. Dr.S.P.Asok, SrP/MEC; published a paper titled "Computer Aided Analysis of a Reactive Chemical System"(http://www.ripublication.com/Volume/ijaerv10n39spl.htm) in International Journal of Applied Engineering Research vol.10; issue.39; page.29484-29488; on 30/05/2015 (2014-15)
  10. Dr.S.P.Asok, SrP/MEC; published a paper titled "Computer Aided Analysis of Effusion Cooling of Gas Turbine Blade "-ISSN 0973-4562(http://www.ripublication.com/Volume/ijaerv10n39spl.htm) in International Journal of Applied Engineering Research vol.10; issue.39; page.29484-29488; on 30/05/2015 (2014-15)
  11. Dr.R.Maheswaran, SrP/MEC; published a paper titled "Optimization of Turning Parameters by Taguchi method"-ISSN 0973-4562(http://www.ripublication.com/ijaer_spl/ijaerv10n39spl_11.pdf) in International Journal of Applied Engineering Research vol.10; issue.39; page.29474-29477; on 30/05/2015 (2014-15)
  12. Dr.R.Maheswaran, SrP/MEC; published a paper titled "Minimize clearance variation in selective assembly by using Genetic Algorithm"-ISSN 0973-4562(http://www.ripublication.com/ijaer_spl/ijaerv10n39spl_42.pdf) in International Journal of Applied Engineering Research vol.10; issue.39; page.29643-29652; on 30/05/2015 (2014-15)
  13. Dr.R.Maheswaran, SrP/MEC; published a paper titled "Preparation of Low Cost Eco-Friendly Aluminium Foam for the Application of Acoustic Attenuation"(http://www.ripublication.com/ijaer_spl/ijaerv10n39spl_90.pdf) in International Journal of Applied Engineering Research vol.10; issue.39; page.29917-29921; on 30/05/2015 (2014-15)
  14. Dr.T.Prabaharan, P/MEC; published a paper titled "Maintenance cost analysis of 4 stroke petrol engine based on Emission Test "- ISSN 0973-4562(http://www.ripublication.com/ijaer_spl/ijaerv10n28spl_52.pdf) in International Journal of Applied Engineering Research vol.10; issue.28; page.22102-22104; on 30/05/2015 (2014-15)
  15. Dr.T.Prabaharan, P/MEC; Dr.M.K.Marichelvam, AP/MEC; published a paper titled "Hybrid flow shop scheduling by modified Bat algorithm"-ISSN 0973-4562(http://www.ripublication.com/ijaer_spl/ijaerv10n39spl_08.pdf) in International Journal of Applied Engineering Research vol.10; issue.39; page.29457-29462; on 30/05/2015 (2014-15)
  16. Dr.R.Rajkumar, P/MEC; published a paper titled "A New Approach to generate dispatching rules for multi-objective flow shop scheduling problems using Metaheruistics" (ISSN 0973-4562) in International Journal of Applied Engineering Research vol.10; issue.19; page.14433-14436; on 30/05/2015 (2014-15)
  17. Dr.R.Rajkumar, P/MEC; Dr.N.Bose, SrP/MEC; published a paper titled “Heat transfer Simulation of Electronics Enclosure with Heat Pipes”-ISSN 0973-4562(http://www.ripublication.com/Volume/ijaerv10n19spl.htm) in International Journal of Applied Engineering Research-.[ISSN 0973-4562] vol.10; issue.19; page.14459 – 14463; on 30/05/2015 (2014-15)
  18. Dr.R.Rajkumar, P/MEC; published a paper titled “Production scheduling problem solving with sequence dependent setup times by using GA”(http://www.ripublication.com/) in International Journal of Applied Engineering Research vol.InPress; on 24/05/2015 (2014-15)
  19. Mr.S.Senthil Murugan, AP/MEC; published a paper titled “Determination of Risk in Hose Reel Operation for Solar Fire Suppression” in National conference on Safety Environment and Industrial Applied Science and Technology, Anna University, Chennai. on 18/05/2015 (2014-15)
  20. Mr.M.Sankaranarayanan, AP/MEC; published a paper titled Experiment and Numerical Investigation on wear behavior of AISI 4340 alloy steel(http://www.ripublication.com/ijaer_spl/ijaerv10n39spl_94.pdf) in International journal of Applied Engineering Research vol.10; issue.39; page.29939 - 29945; on 01/05/2015 (2014-15)
  21. Dr.P.Nagaraj, SrPH/MEC; published a paper titled Neural network approach to update finite element model with experimental test results using orthogonal array technique (http://www.ripublication.com/ijaerspl3/ijaerv10n55spl_714.pdf) in International journal of Applied Engineering Research, vol.10; issue.55; page.3712 – 3716; on 01/05/2015 (2014-15)
  22. Mr.N.Naganambi, AP/MEC; published a paper titled “Effect of Thermal Changes in a Flash Butt Weld” in National conference on Advances in Mechanical Engineering (NME 2015), Regional Office, Anna University, Tirunelveli Region. vol.1; issue.1; on 30/04/2015 (2014-15)
  23. Mr.R.Tharmaraj, ; Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Impact strength of Friction Stud Welded AA 1051/AISI 1030 Joints” in National conference on Advances in Mechanical Engineering,Department of Mechanical Engineering, Regional Centre, Anna University, Tirunelveli vol.1; issue.1; on 30/04/2015 (2014-15)
  24. Mr.N.Naganambi, AP/MEC; Mr.C.A.K.Arumugam, AP/MEC; published a paper titled “Finite Element Analysis and Analytical calculation of Residual stresses in a Flash Butt welded Rail"(http://www.ripublication.com/Volume/ijaerv10n19spl.htm) in International Journal of Applied Engineering Research-.[ISSN 0973-4562] vol.10; issue.19; page.14464 – 14469; on 21/04/2015 (2014-15)
  25. Mr.M.Sankaranarayanan, AP/MEC; published a paper titled “Optimisation on sliding wear behaviour of AISI 4340 alloy steel”(hhttp://www.ripublication.com/Volume/ijaerv10n19spl.htm) in International Journal of Applied Engineering Research-.[ISSN 0973-4562] vol.10; issue.19; page.14440 – 14444; on 21/04/2015 (2014-15)
  26. Dr.R.Maheswaran, SrP/MEC; published a paper titled “Finite Element Analysis of Composite Crash Box”(http://www.ripublication.com/Volume/ijaerv10n19spl.htm) in International Journal of Applied Engineering Research-.[ISSN 0973-4562] vol.10; issue.19; page.14763 – 14766; on 21/04/2015 (2014-15)
  27. Dr.T.Prabaharan, P/MEC; published a paper titled “Flow shop Scheduling using Modified Improved Genetic Algorithm in Textile Industry”(http://www.ripublication.com/Volume/ijaerv10n4.htm) in International Journal of Applied Engineering Research-.[ISSN 0973-4562] vol.10; issue.4; page.9201 - 9218; on 21/04/2015 (2014-15)
  28. Mrs.V.S.Benitha, SrAP/NST; published a paper titled “Fabrication of Non-Volatile Memory Device using High Dielectric Material” in National Conference on Recent advancements in Mechanical Engineering, RAME 2015, KSR Tiruchengode, vol.1; issue.1; page.9; on 16/04/2015 (2014-15)
  29. Mrs.V.S.Benitha, SrAP/NST; published a paper titled “Fabrication of organic thin flim solar cells using brush painting and sputtering” in National Conference on Recent advancements in Mechanical Engineering, RAME 2015, KSR Tiruchengode, vol.1; issue.1; page.9; on 16/04/2015 (2014-15)
  30. Dr.R.Maheswaran, SrP/MEC; published a paper titled “Wear Study in Stir cast AA6063/SiC Composites in National Conference on Recent Advancements in Mechanical Engineering (NCRAME’15),VV College of Engineering vol.1; issue.1; on 10/04/2015 (2014-15)
  31. Dr.R.Maheswaran, SrP/MEC; published a paper titled “WInfluence of Nanofluids in Worm Gear Box Efficiency – An Overview"" in National Conference on Recent Advancements in Mechanical Engineering (NCRAME’15),VV College of Engineering vol.1; issue.1; on 10/04/2015 (2014-15)
  32. Mrs.V.S.Benitha, SrAP/NST; published a paper titled “Studies on Mechanical Behaviour of Concrete structures incorporated by Nanoparticles” in National Conference on Recent advancements in Mechanical Engineering,, NCRAME’15,VV College of Engineering, Tisaiyanvilai vol.1; issue.1; page.24-34; on 10/04/2015 (2014-15)
  33. Mr.K.Maheswaran, SrAP/MEC; published a paper titled A study on Machining parameters for Wire Electrical Discharge Machining of Circular Contour in Stir cast AA6063/SiC composites” in Third International Conference on Advanced Design and Manufacturing,Sethu Institute of Technology vol.1; issue.1; on 10/04/2015 (2014-15)
  34. Mr.K.Maheswaran, SrAP/MEC; published a paper titled “Optimization of Different Machining Parameters in EN-24 Steel by sub-zero treated CNMG insert tool using DOE” in Third International Conference on Advanced Design and Manufacturing,Sethu Institute of Technology vol.1; issue.1; on 10/04/2015 (2014-15)
  35. Mr.J.Thanikachalam, SrAP/MEC; published a paper titled "Preparation, Synthesis, Characterization of Nano Magnetic Fluids" in International Conference on AmmA-2015, NIT, Trichy vol.1; issue.1; on 09/04/2015 - 11/04 (2014-15)
  36. Dr.N.Bose, SrP/MEC; published a paper titled Numerical Analysis on Effect of Heat pipe in cooling of Electronic Enclosures in International Conference on Advances in Materials, Manufacturing and Applications (AMMA 2015),NIT Trichy vol.1; issue.1; page.357 – 364; on 09/04/2015 (2014-15)
  37. Mr.N.Vasiraja, SrAP/MEC; published a paper titled Finite Element Analysis of thin Al/Al2O3 FGM plate under Transverse load for varying Grading Index in International Conference on Advances in Materials, Manufacturing and Applications (AMMA 2015),NIT Trichy vol.1; issue.1; page.206; on 09/04/2015 (2014-15)
  38. Mr.N.Vasiraja, SrAP/MEC; published a paper titled Thermo-Elastic Instability of Functionally Graded Material Disc. in International Conference on Advances in Materials, Manufacturing and Applications (AMMA 2015),NIT Trichy vol.1; issue.1; on 09/04/2015 (2014-15)
  39. Mr.N.Naganambi, AP/MEC; Mr.C.A.K.Arumugam, AP/MEC; published a paper titled Prediction of Residual stresses in a Flash Butt welded rail by hole drilling method. in International Conference on Advances in Materials, Manufacturing and Applications (AMMA 2015),NIT Trichy vol.1; issue.1; on 09/04/2015 (2014-15)
  40. Mr.K.Maheswaran, SrAP/MEC; published a paper titled “An Ergonomic Evaluation on Manual Materials Handling Tasks and Improvement of Occupational Workers Health” , ISBN : 978-93-80686-98-1 in International Conference on Future Trends in Engineering & Technology, PSNA College of Engineering & Technology, Dindigul vol.1; issue.1; on 07/04/2015 - 08/04 (2014-15)
  41. Mr.M.Anandhan, SlAP/MEC; published a paper titled Investigation for comparative assertion of synthetic dye and natural dye using Life cycle approach in International Conference on Future Trends in Engineering and Technology (ICFTET – 2015), PSNA College of Engineering and Technology vol.1; issue.1; on 07/04/2015 - 08/04 (2014-15)
  42. Mr.M.Anandhan, SlAP/MEC; published a paper titled Design and Development of Eco-Friendly dying machine. in International Conference on Future Trends in Engineering and Technology (ICFTET – 2015), PSNA College of Engineering and Technology vol.1; issue.1; on 07/04/2015 - 08/04 (2014-15)
  43. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled Simulation of the Effect of Stand-off Distance on Impact Dynamics of Tooth Structure - [This paper also receives Best Paper Award] in International Conference on Future Trends in Engineering and Technology (ICFTET – 2015), PSNA College of Engineering and Technology vol.1; issue.1; on 07/04/2015 - 08/04 (2014-15)
  44. Mr.R.Saravana Sathiya Prabhahar, SrAP/MEC; published a paper titled A study on Bio-Oil produced from paper waste using pyrolysis Process. in International Conference on Future Trends in Engineering and Technology (ICFTET – 2015), PSNA College of Engineering and Technology vol.1; issue.1; on 07/04/2015 - 08/04 (2014-15)
  45. Mr.M.Sankaranarayanan, AP/MEC; published a paper titled Experimental and Numerical Investigation on wear behaviour of AISI 4340 alloy steel in International Conference on Future Trends in Engineering and Technology (ICFTET – 2015), PSNA College of Engineering and Technology vol.1; issue.1; on 07/04/2015 - 08/04 (2014-15)
  46. Dr.S.P.Asok, SrP/MEC; published a paper titled Computer Aided Analysis of a reactive chemical system – [This paper also receives Best Paper Award] in International Conference on Future Trends in Engineering and Technology (ICFTET – 2015), PSNA College of Engineering and Technology vol.1; issue.1; on 07/04/2015 - 08/04 (2014-15)
  47. Dr.S.P.Asok, SrP/MEC; published a paper titled Computer Aided Analysis of effusion cooling of gas turbine blades. in International Conference on Future Trends in Engineering and Technology (ICFTET – 2015), PSNA College of Engineering and Technology vol.1; issue.1; on 07/04/2015 - 08/04 (2014-15)
  48. Dr.R.Maheswaran, SrP/MEC; published a paper titled Optimization of Turning Parameters by Taguchi Method in International Conference on Future Trends in Engineering and Technology (ICFTET – 2015), PSNA College of Engineering and Technology vol.1; issue.1; on 07/04/2015 - 08/04 (2014-15)
  49. Dr.R.Maheswaran, SrP/MEC; published a paper titled Preparation of Low cost Eco – friendly Aluminum Foam for the application of Acoustic Attenuation in International Conference on Future Trends in Engineering and Technology (ICFTET – 2015), PSNA College of Engineering and Technology vol.1; issue.1; on 07/04/2015 - 08/04 (2014-15)
  50. Dr.R.Maheswaran, SrP/MEC; published a paper titled Minimize Clearance Variation of Selective Assembly by using Genetic Algorithm in International Conference on Future Trends in Engineering and Technology (ICFTET – 2015), PSNA College of Engineering and Technology vol.1; issue.1; on 07/04/2015 - 08/04 (2014-15)
  51. Dr.T.Prabaharan, P/MEC; Dr.M.K.Marichelvam, AP/MEC; published a paper titled Hybrid flow shop scheduling by modified Bat Algorithm. in International Conference on Future Trends in Engineering and Technology (ICFTET – 2015), PSNA College of Engineering and Technology vol.1; issue.1; on 07/04/2015 - 08/04 (2014-15)
  52. Dr.S.P.Asok, SrP/MEC; published a paper titled “Parametric studies on Flower pot safety” in Third National Conference on Recent trends in Mechatronics and Industrial Safety Engineering,KSR College of Technology. vol.1; issue.1; on 04/04/2015 (2014-15)
  53. Mr.J.Thanikachalam, SrAP/MEC; published a paper titled "Finite Element Simulation of Magneto-Rheological Brake" in International Conference on Emerging trends in Engineering and Technology,ICET-2K15, KNSK College of Engg.Nagercoil vol.1; issue.1; on 01/04/2015 - 02/04 (2014-15)
  54. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled "Modelling of Enamel and Dentin Removal in Micro Air Abrasion Technique”(http://mechanical.journalspub.info/index.php/IJPE/article/view/17) in International Journal of Production EngineerinG vol.1; issue.1; page.1-4; on 01/04/2015 (2014-15)
  55. Mr.S.Senthil Murugan, AP/MEC; published a paper titled “Investigation of water effluent treatment with sargassam – wighitti algae for the removal of Heavy metals” in National Conference Proceedings,Kongu Engineering College, Erode vol.1; issue.1; on 31/03/2015 (2014-15)
  56. Mr.M.Sankaranarayanan, AP/MEC; published a paper titled “Bagasse/Palm Kernel Shell – Vinyl Ester Composite: Fabrication and Mechanical Characterisation” in International Conference on Emerging Trends in Engineering and Technology (ICET 2015), K.N.S.K.College of Engineering, Nagercoil vol.1; issue.1; on 26/03/2015 - 27/03 (2014-15)
  57. Mr.M.Sankaranarayanan, AP/MEC; published a paper titled “Bagasse/Palm Kernel Shell – Vinyl Ester Composite: Fabrication and Mechanical Characterisation”(http://www.ripublication.com/ijaer.htm) in International Journal of Applied Engineering Research(IJAER) ISSN 0973 – 4562 (IJAER) vol.10; issue.2; on 26/03/2015 - 27/03 (2014-15)
  58. Mrs.V.S.Benitha, SrAP/NST; published a paper titled ““Behavioural Studies of Nano Formulated Paints” in IInternational Conference on Innovations in Engineering and Technology, ICIET’14, KLN,Madurai vol.1; issue.1; page.2671-2676; on 21/03/2015 - 22/03 (2014-15)
  59. Mr.R.Saravana Sathiya Prabhahar, SrAP/MEC; published a paper titled “Characterization of Bio-oil from Neem Leaves by Pyrolysis process” in International Conference on Engineering and scientific innovations (ICESI -15),Mar Ephraem College of Engineering and Technology vol.1; issue.1; on 20/03/2015 (2014-15)
  60. Dr.A.Vasanthanathan, ASP/MEC; published a paper titled “Experimental Evaluation of Defect identification in composite structures using IR Thermography” in National Conference on Innovations in Engineering, Science and Technology-NCIEST, RIT, Rajapalayam vol.1; issue.1; on 07/03/2015 (2014-15)
  61. Mr.K.Maheswaran, SrAP/MEC; published a paper titled “Physico – Chemical Characteristic of Match Industries and Bio degradability index” in 1st International Conference on Advanced Engineering and Technology for Sustainable Development ( ICAETSD 2015) at Karpagam College of Engineering, Coimbatore vol.1; issue.1; on 05/03/2015 - 06/03 (2014-15)
  62. Mr.C.A.K.Arumugam, AP/MEC; published a paper titled “Finite element analysis and analytical calculation of Residual stress in the flash welded Rail” in International Conference on Advanced Engineering and Technology for Sustainable Development (ICAETSD 2015),Karpagam College of Engineering, Coimbatore vol.1; issue.1; on 05/03/2015 - 06/03 (2014-15)
  63. Mr.S.Senthil Murugan, AP/MEC; published a paper titled “Experimental study on safe distance for fire suppression activities in photo-voltaic systems” in International Conference on Advanced Engineering and Technology for Sustainable Development (ICAETSD 2015),Karpagam College of Engineering, Coimbatore vol.1; issue.1; on 05/03/2015 - 06/03 (2014-15)
  64. Mr.M.Sankaranarayanan, AP/MEC; published a paper titled “Optimisation of sliding wear behaviour of AISI 4340 Alloy Steel” in International Conference on Advanced Engineering and Technology for Sustainable Development (ICAETSD 2015),Karpagam College of Engineering, Coimbatore vol.1; issue.1; on 05/03/2015 - 06/03 (2014-15)
  65. Dr.R.Rajkumar, P/MEC; published a paper titled “Heat transfer simulation of Electronics Enclosure with Heat pipes” in International Conference on Advanced Engineering and Technology for Sustainable Development (ICAETSD 2015),Karpagam College of Engineering, Coimbatore vol.1; issue.1; on 05/03/2015 - 06/03 (2014-15)
  66. Dr.R.Rajkumar, P/MEC; published a paper titled “A New approach to Generate Dispatching Rules for Multi-Objective Flow shop scheduling problem using Meta-Leurisation” in International Conference on Advanced Engineering and Technology for Sustainable Development (ICAETSD 2015),Karpagam College of Engineering, Coimbatore vol.1; issue.1; on 05/03/2015 - 06/03 (2014-15)
  67. Mr.N.Naganambi, AP/MEC; published a paper titled “Finite element analysis and analytical calculation of Residual stress in the flash welded Rail” in International Conference on Advanced Engineering and Technology for Sustainable Development (ICAETSD 2015), Karpagam College of Engineering, Coimbatore vol.1; issue.1; on 05/03/2015 (2014-15)
  68. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Modelling of Molar Tooth and Its Behaviour under the Impact of Abrasive Jet”(http://www.ripublication.com/ijaer.htm) in International Journal of Applied Engineering Research (IJAER) vol.10; issue.8; page.6104-6106; on 01/03/2015 (2014-15)
  69. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; Mr.R.Tharmaraj, ; published a paper titled “Prediction of Thermal Profile during Friction Stud Welding of Aluminium - Mild Steel Joints”(http://www.ripublication.com/ijaer.htm) in International Journal of Applied Engineering Research (IJAER) vol.10; issue.8; page.6107-6110; on 01/03/2015 (2014-15)
  70. Dr.T.Prabaharan, P/MEC; Dr.M.K.Marichelvam, AP/MEC; published a paper titled “Solving realistic industrial scheduling problems using a multi-objective improved hybrid particle swarm optimization (MOIHPSO) algorithm” (http://www.inderscience.com/info/inarticle.php?artid=68752 DOI: 10.1504/IJOR.2015.068752) in International Journal of Operations Research vol.InPress; on 01/03/2015 (2014-15)
  71. Dr.A.Vasanthanathan, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled “Correlation study of IRTNDT Analysis with structural failure mode of carbon fabric – reinforced epoxy Composites” (ISSN 1558-9250 http://www.jeffjournal.org/papers/Volume10/V10I1(8)%20V.%20Arunachalam.pdf) in Journal of Engineered Fibers and Fabrics vol.10; issue.1; page.75-88; on 01/03/2015 (2014-15)
  72. Mr.N.Naganambi, AP/MEC; published a paper titled “FE Modelling of Bonded Repair for the TDS of Helicopter and Mechanical Characterization of Composite Patch” in National Conference on “Advances in Mechanical Engineering” (NACAME – 14), MSEC vol.1; issue.1; page.53-57; on 21/02/2015 (2014-15)
  73. Mr.N.Naganambi, AP/MEC; published a paper titled “Fabrication and Identification of optimal blend of SiR and PU for cables” in National Conference on “Advances in Mechanical Engineering” (NACAME – 14), MSEC vol.1; issue.1; page.357- 362.; on 21/02/2015 (2014-15)
  74. Mr.S.Senthil Murugan, AP/MEC; published a paper titled “Characterization and optimization of Al6061-Flyash-SiC composite in fabrication process using Taguchi method” in International Conference on Advances in Production and Industrial Engineering (INCAPIE-2015), NIT, Trichy vol.1; issue.1; on 20/02/2015 - 21/02 (2014-15)
  75. Mr.S.Senthil Murugan, AP/MEC; published a paper titled “Tribological wear behaviour and hardness measurement of SiC, Al2O3 reinforced Aluminium Matrix hybrid Composite ” in International Conference on Advances in Production and Industrial Engineering (INCAPIE-2015), NIT, Trichy vol.1; issue.1; on 20/02/2015 - 21/02 (2014-15)
  76. Mr.M.Sankaranarayanan, AP/MEC; published a paper titled “Characterisation of Bagasse/Palm Kernal shell – Vinyl Ester Composite” in International Conference on Advances in Production and Industrial Engineering (INCAPIE-2015), NIT, Trichy vol.1; issue.1; on 20/02/2015 - 21/02 (2014-15)
  77. Dr.T.Prabaharan, P/MEC; published a paper titled “Potato peel as a Green Inhibitor for Mild Steel corrosion in various acid mediums” in International Conference on Advances in Production and Industrial Engineering (INCAPIE-2015), NIT, Trichy vol.1; issue.1; on 20/02/2015 - 21/02 (2014-15)
  78. Dr.T.Prabaharan, P/MEC; published a paper titled “Experimental study of suppressing polymer fires using water mist and optimizing suppression property required for Fire Extinguishment” in International Conference on Advances in Production and Industrial Engineering (INCAPIE-2015), NIT, Trichy vol.1; issue.1; on 20/02/2015 - 21/02 (2014-15)
  79. Mrs.V.S.Benitha, SrAP/NST; published a paper titled ““Green Synthesis of Iron oxide Nanoparticle and Its Characterisation” in International conference on Recent Innovations In Engineering and Technology, ICRIET 15 ,Mahabarathi Engineering College, Villupuram vol.1; issue.1; on 13/02/2015 - 14/02 (2014-15)
  80. Mrs.V.S.Benitha, SrAP/NST; published a paper titled “Green Synthesis of Iron-Oxide Nanoparticle and its Characterization” in International Conference on “Recent Innovation in Engineering and Technology – 2015”, Mahabharathi Engineering College, Villupuram. vol.1; issue.1; on 13/02/2015 (2014-15)
  81. Dr.A.Azhagurajan, ASP/MEC; published a paper titled "Nano Composites self cleaning outdoor insulators to prevent flash over" in National conference on Safety Environment and Industrial Applied Science and Technology, Anna University, Chennai. vol.1; issue.1; page.36; on 04/02/2015 - 06/02 (2014-15)
  82. Dr.A.Azhagurajan, ASP/MEC; published a paper titled "Preparation of Eco-Friendly Fireworks composition with saw dust/Peanut shell powder to reduce SO2 emission"" in National conference on Safety Environment and Industrial Applied Science and Technology, Anna University, Chennai. vol.1; issue.1; page.41; on 04/02/2015 - 06/02 (2014-15)
  83. Dr.A.Azhagurajan, ASP/MEC; published a paper titled "Study on influencing factors of thermal decomposition for pyrotechnic stars" in National conference on Safety Environment and Industrial Applied Science and Technology, Anna University, Chennai. vol.1; issue.1; page.42; on 04/02/2015 - 06/02 (2014-15)
  84. Mr.K.Maheswaran, SrAP/MEC; published a paper titled "Reduction of Harmful Gases in Pyro chemical waste disposal by incineration Technique" in National Conference on Safety Environment and Industrial Applied Science and Technology, Anna University,Chennai vol.1; issue.1; on 04/02/2015 - 06/02 (2014-15)
  85. Mr.K.Maheswaran, SrAP/MEC; published a paper titled "Investigation on Mitigation of Class B Fire using Ionized alkaline mist and Foam" in National Conference on Safety Environment and Industrial Applied Science and Technology, Anna University,Chennai vol.1; issue.1; on 04/02/2015 - 06/02 (2014-15)
  86. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Simplifying the powder metallurgy manufacturing process using soft computing tools”. doi:10.1016/j.asoc.2014.11.011 (http://www.sciencedirect.com/science/article/pii/S1568494614005729) in International Journal of Applied Soft Computing vol.27; issue.2; page.191-204; on 01/02/2015 (2014-15)
  87. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Optimizing the wear behaviour of TiN coated SS316L disc against Ti alloy using Response Surface Methodology” (http://www.sciencedirect.com/science/article/pii/S0261306914008395; DOI: 10.1016/j.matdes.2014.10.0) in Materials & Design vol.67; issue.2; page.469-482; on 01/02/2015 (2014-15)
  88. Dr.R.Rajkumar, P/MEC; published a paper titled • “Review of mechanical properties of composite materials” in International conference on Advances in Mechanical and Mechatronics Engineering vol.1; issue.1; on 26/01/2015 - 27/01 (2014-15)
  89. Dr.R.Rajkumar, P/MEC; published a paper titled “Production scheduling problem solving using GA with sequence dependent set up times” in International conference on Advances in Mechanical and Mechatronics Engineering vol.1; issue.1; on 26/01/2015 - 27/01 (2014-15)
  90. Dr.K.Jeyasubramanian, P/NST; Mrs.V.S.Benitha, SrAP/NST; Dr.N.Selvakumar, SrP/MEC; published a paper titled “Electrochemical impedance spectroscopic analysis of ZnS nano-rod fabricated using butterfly wings as biotemplate” (DOI 10.1007/s40195-014-0175-7) in Acta Metallargica Sinica (English Letters) vol.28; issue.1; page.103-109; on 15/01/2015 (2014-15)
  91. Dr.A.Vasanthanathan, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled “Finite Element Studies on Lattice Conical shell structures using LS-DYNA®” in International Conference on Sustainable Energy Resources, Materials and Technologies (ISERMAT-2015), SSN Chennai vol.1; issue.1; page.133; on 08/01/2015 - 09/01 (2014-15)
  92. Dr.A.Vasanthanathan, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled “Finite element modelling and simulation of train car body structure using LS-DYNA®” in International Conference on Sustainable Energy Resources, Materials and Technologies (ISERMAT-2015), SSN Chennai vol.1; issue.1; page.132; on 08/01/2015 - 09/01 (2014-15)
  93. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled • “Prediction of Thermal distribution in Friction Welded Alumina/Steel Combination” in International Conference on Advances in Design and Manufacturing, held at National Institute of Technology, Trichy vol.3; issue.1; page.11175-1178; on 01/01/2015 (2014-15)
  94. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Analytical Evaluation of the performance of Abrasives in Drill Less Dentistry” in International Conference on Advances in Design and Manufacturing, held at National Institute of Technology, Trichy vol.3; issue.1; page.1179-1182; on 01/01/2015 (2014-15)
  95. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled • “Thermo Mechanical Modeling of Friction Welding Using Finite Element Method” in International Conference on Advances in Materials and Materials Processing, Karunya University, Coimbatore vol.3; issue.1; page.156 - 163; on 01/01/2015 (2014-15)
  96. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Recent trend In Wire Electrical Discharge Machining of MMC’s” in International Conference on Advances in Materials and Materials Processing, Karunya University, Coimbatore vol.3; issue.1; page.151 - 155; on 01/01/2015 (2014-15)
  97. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Modelling of Dental caries Removal using Micro Air Abrasion Technique” in International Conference on Advances in Materials and Materials Processing, Karunya University, Coimbatore vol.3; issue.1; page.136 - 140; on 01/01/2015 (2014-15)
  98. Mr.R.Tharmaraj, ; published a paper titled "Effect of Process Parameters on axial shortening distance in Friction Stud Welding" in International Conference on Advances in Materials and Materials Processing, Karunya University, Coimbatore vol.1; issue.1; page.132-135; on 01/01/2015 (2014-15)
  99. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled "Effect of Process Parameters on axial shortening distance in Friction Stud Welding" in International Conference on Advances in Materials and Materials Processing, Karunya University, Coimbatore: vol.1; issue.1; page.132-135; on 01/01/2015 (2014-15)
  100. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled • “Modeling of Enamel and Dentin Removal in Drill less Dentistry in International Conference on Mathematics and its Applications,University College of Engineering, Villupuram: vol.1; issue.1; page.1548-1554; on 01/01/2015 (2014-15)
  101. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled “Thermal Analysis of Wire Electrode Discharge Machining Process” in International Conference on Mathematics and its Applications,University College of Engineering, Villupuram: vol.1; issue.1; page.1796-1802; on 01/01/2015 (2014-15)
  102. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Simulation Of Friction Stud Welding Process With An Intermetallic Layer” in International Journal of Applied Engineering Research (IJAER) vol.9; issue.26; page.9028 – 9030; on 01/01/2015 (2014-15)
  103. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled “Numerical Modeling of Temperature Distribution in Friction Stud Welding of Dissimilar Metals” in International Journal of Applied Engineering Research (IJAER) vol.9; issue.26; page.9023 - 9027; on 01/01/2015 (2014-15)
  104. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled “Thermal Modeling of Friction Plug Welding” in International Journal of Applied Engineering Research (IJAER) vol.9; issue.26; page.9031-9033; on 01/01/2015 (2014-15)
  105. Dr.R.Rajkumar, P/MEC; published a paper titled “Scheduling problem solving using Genetic and Greedy algorithms”(http://www.inderscience.com/info/ingeneral/forthcoming.php?jcode=ijcaet) in International Journal of Computer Aided Engineering and Technology, INDERSCIENCE vol.InPress; on 01/01/2015 (2014-15)
  106. Dr.R.Rajkumar, P/MEC; published a paper titled “A comparison of Artificial Bee Colony algorithm and Genetic algorithm to minimize the make span for job shop scheduling” (http://www.sciencedirect.com/science/article/pii/S1877705814033943 doi:10.1016/j.proeng.2014.12.326) in Procedia Engineering vol.91; page.1745-1754; on 01/01/2015 (2014-15)
  107. Mr.R.Tharmaraj, ; Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Mathematical Modelling of Heat Flow in Friction Stud Welding” in International Conference on Mathematics and its applications (ICMAA 2014),University College of Engineering, Villupuram vol.1; issue.1; on 15/12/2014 - 17/12 (2014-15)
  108. Dr.A.Vasanthanathan, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; Mr.N.Vasiraja, SrAP/MEC; published a paper titled “Finite Element Modelling of shape memory Alloy based smart link composite satellite structure”(http://serc.res.in/jose/index.html) in Journal of Structural Engineering. vol.41; issue.5; page.524-531; on 11/12/2014 (2014-15)
  109. Dr.P.Nagaraj, SrPH/MEC; Dr.A.Vasanthanathan, ASP/MEC; published a paper titled (ISBN: 978-981-09-1139-3 doi: 10.3850/978-981-09-1139-3_115) in 5th International Congress on Computational Mechanics and Simulation (ICCMS-2014),CSIR-SERC,Chennai page.524-531; on 10/12/2014 - 14/12 (2014-15)
  110. Dr.P.Nagaraj, SrPH/MEC; Dr.A.Vasanthanathan, ASP/MEC; published a paper titled (ISBN: 978-981-09-1139-3 doi: 10.3850/978-981-09-1139-3_131) in 5th International Congress on Computational Mechanics and Simulation (ICCMS 2014),CSIR-SERC,Chennai page.590-599; on 10/12/2014 - 13/12 (2014-15)
  111. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Mechanical analysis and high temperature wear behaviour of AlCrN/DLC coated Titanium alloy”(http://www.inderscience.com/info/ingeneral/forthcoming.php?jcode=ijsurfse) in International Journal of Surface Science and Engineering vol.InPress; on 21/11/2014 (2014-15)
  112. Dr.A.Azhagurajan, ASP/MEC; Dr.N.Selvakumar, SrP/MEC; published a paper titled “Impact of nano particles on safety and environment for fireworks chemicals”DOI: 10.1016/j.psep.2013.12.007. (http://www.journals.elsevier.com/process-safety-and-environmental-protection/ ) in Process Safety and Environmental Protection vol.92; page.732-738; on 03/11/2014 (2014-15)
  113. Dr.M.K.Marichelvam, AP/MEC; published a paper titled "Solving tri-objective multistage hybrid flow shop scheduling problems using a discrete firefly algorithm", DOI: 10.1504/IJIEI.2014.067190 (http://www.inderscience.com/info/inarticle.php?artid=67190) in International Journal of Intelligent Engineering Informatics vol.2; issue.4; page.284-303; on 02/11/2014 (2014-15)
  114. Mr.B.Venkatraman, AP/MEC; published a paper titled "Machining Zone Area in Single Point Diamond Turning" (http://www.ripublication.com/ijaer.htm) in International Journal of Applied Engineering Research (IJAER) vol.10; issue.2; page.1476-1479; on 01/10/2014 (2014-15)
  115. Mr.B.Venkatraman, AP/MEC; published a paper titled "Mathematical Formulation for the Estimation of Volumetric Heat Transfer in Precision Machining operations" (http://www.krishisanskriti.org/jmsme.html) in Journal of Material Science and Mechanical Engineering (JMSME) vol.1; issue.2; page.131-134; on 01/10/2014 (2014-15)
  116. Dr.R.Maheswaran, SrP/MEC; published a paper titled “Effect of inclusions of SiC particles in the mechanical resistance behaviour of AA6063/SiC composites”(http://www.sciencedirect.com/science/article/pii/S0261306914007699DOI:10.1016/j.matdes.2014.09.067) in Materials & Design vol.InPress; on 23/09/2014 (2014-15)
  117. Dr.K.Jeyasubramanian, P/NST; published a paper titled “Preparation of TiO2 Nanopaint using ball milling process and investigations on its antibacterial properties” (http://www.researchgate.net/publication/266150606 DOI: 10.1166/mex.2014.1185) in Materials Express vol.4; issue.5; page.393 -399; on 16/09/2014 (2014-15)
  118. Mr.N.Naganambi, AP/MEC; published a paper titled “Numerical Investigation of bonded Repair for TDS of Helicopter & Characterization of Kevlar / Epoxy Composite patch” ([http://www.sciencedirect.com/science/article/pii/S2211812814006245DOI: 10.1016/j.mspro.2014.07.259]) in Procedia Material Science vol.5; page.204-211; on 10/09/2014 (2014-15)
  119. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; Mr.R.Tharmaraj, ; published a paper titled Thermal Analysis on Joining of Dissimilar Metals by Friction Stud Welding(http://www.scientific.net/AMR.984-985.592 [DOI10.4028/www.scientific.net/AMR.984-985.592]) in Advanced Materials Research vol.984-985 ; page.592-595; on 01/09/2014 (2014-15)
  120. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled "Mathematical Model to Predict Heat Flow in Underwater Friction Stud Welding”(http://www.scientific.net/AMR.984-985.596. [DOI10.4028/www.scientific.net/AMR.984-985.596]) in Advanced Materials Research vol.984-985 ; page.596-599; on 01/09/2014 (2014-15)
  121. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled "Mathematical modelling of friction plug welding with pre-heating effect” (http://www.scientific.net/AMR.984-985.600 [DOI 10.4028/www.scientific.net/AMR.984-985.600]) in Advanced Materials Research vol.984-985 ; page.600-603; on 01/09/2014 (2014-15)
  122. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Tribological, tensile and hardness behavior of TiB2 reinforced Aluminum metal matrix composite”(http://www.scimagojr.com/journalsearch.php?q=12600154711&tip=sid&clean=0) in Journal of the Balkan Tribological Association vol.20; issue.3; page.380-394; on 25/08/2014 (2014-15)
  123. Mr.R.Tharmaraj, ; Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled Finite Difference Model to predict Thermal Cycle in Friction Stud Welding (http://www.icmmm2014-iitm.co.in/) in "International Colloquium on Materials, Manufacturing and Metrology",IITMadras vol.1; issue.1; on 08/08/2014 - 09/08 (2014-15)
  124. Mr.R.Tharmaraj, ; Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled Regression Modeling of Friction Stud Welding of Aluminium-Mild Steel Combination(http://www.icmmm2014-iitm.co.in/) in "International Colloquium on Materials, Manufacturing and Metrology",IITMadras vol.1; issue.1; on 08/08/2014 - 09/08 (2014-15)
  125. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Effect of graphite addition on Mechanical behavior of A16061/TiB2 Hybrid composite using acoustic emission” (http://www.journals.elsevier.com/materials-science-and-engineering-a/) in Materials Science and Engineering: A vol.612; issue.8; page.16-27; on 01/08/2014 (2014-15)
  126. Dr.N.Bose, SrP/MEC; published a paper titled “Effect of compression ratio on Diesel engine performance and emission fuelled with Tamana oil methyl ester and its blends” (http://www.ttp.net/1022-6680/Books.html) in Journal of Advanced Materials Research vol.984 – 985; page.850 – 854; on 08/07/2014 (2014-15)
  127. Dr.K.Jeyasubramanian, P/NST; published a paper titled “Graphene oxide Nano paint" (http://www.sciencedirect.com/science/article/pii/S0008622314001407 DOI:10.1016/j.carbon.2014.0) in CARBON vol.72; page.328 – 337; on 07/07/2014 (2014-15)
  128. Dr.P.Nagaraj, SrPH/MEC; Mr.J.Thanikachalam, SrAP/MEC; published a paper titled "Design and Analysis of Magneto-rheological Fluid Brake (MRB)"(doi:10.4028/www.scientific.net/AMR.984-985.634 ) in Advanced Materials Research vol.984-985; page.634-640; on 04/07/2014 (2014-15)
  129. Mr.J.Thanikachalam, SrAP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled Preparation of MR fluid and Modeling of Magneto rheological Fluid Brake (MRB)(doi:10.4028/www.scientific.net/AMM.592-594.2254 ) in Applied Mechanics and Materials vol.592-594; page.2254-2260; on 04/07/2014 (2014-15)
  130. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Studies on formability behaviour of aluminium alloy sheets with ceramic nanocoatings”(http://www.scientific.net/AMR.984-985.482 DOI:10.4028/www.scientific.net/AMR.984-985.482) in Advanced Materials Research page.984 – 985; on 01/07/2014 (2014-15)
  131. Dr.N.Selvakumar, SrP/MEC; Dr.A.Azhagurajan, ASP/MEC; published a paper titled “Environment friendly fireworks manufacturing using Nano scale flash powder”(http://www.niscair.res.in/sciencecommunication/researchjournals/rejour/jsir/jsir0.asp) in Journal of Scientific and Industrial Research, JSIR (Indian Journal) vol.73; page.479-484; on 01/07/2014 (2014-15)
  132. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Experimental investigation on mechanical behaviour, modelling and optimization of wear parameters of B4C and graphite reinforced aluminium hybrid composites”(http://www.sciencedirect.com/science/article/pii/S0261306914005032 DOI:10.1016/j.matdes.2014.06.) in Materials & Design vol.In Press; on 01/07/2014 (2014-15)

2013-14

  1. Dr.R.Rajkumar, P/MEC; published a paper titled “Scheduling Problem solving using Genetic and Greedly Algorithm” in 2nd National Conference on Research and Advances in Mechanical Engineering (RAME’14), PSREC vol.1; issue.1; on 21/06/2014 (2013-14)
  2. Mr.J.Thanikachalam, SrAP/MEC; published a paper titled “Synthesis & Characterization of Magneto Rheological Fluid”(http://www.nitt.edu/home/academics/departments/mech/international_mechanical_enginee/) in International Mechanical Engineering Congress (IMEC-2014) vol.1; issue.1; on 13/06/2014 - 15/06 (2013-14)
  3. Mr.K.Maheswaran, SrAP/MEC; published a paper titled “Ergonomic Analysis of fitting process in an Automobile Industry”(http://www.nitt.edu/home/academics/departments/mech/international_mechanical_enginee/) in International Mechanical Engineering Congress-2014 , NIT Trichy vol.1; issue.1; on 13/06/2014 - 15/06 (2013-14)
  4. Dr.N.Bose, SrP/MEC; published a paper titled "Optimization of process parameters for Biodiesel expraction from Tamanu oil using design of experiments" (http://scitation.aip.org/content/aip/journal/jrse; http://dx.doi.org/10.1063/1.4880216) in Journal of Renewable and sustainable energy vol.6; issue.3; page.033120 ; on 20/05/2014 (2013-14)
  5. Dr.A.Vasanthanathan, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled "Finite Element Analysis of axial compression of stiffened GFRP Composite shells using ANSYS"(http://www.ansys.com) in 2014 ANSYS Convergence Conference, Banglore vol.1; issue.1; page.1-2; on 09/05/2014 (2013-14)
  6. Dr.S.P.Asok, SrP/MEC; published a paper titled “Hazard Analysis in match works industries” in National Conference, EASA CET,Coimbatore vol.1; issue.1; on 04/05/2014 (2013-14)
  7. Dr.S.P.Asok, SrP/MEC; published a paper titled “Suppression of Backdraft in Buildings” in National Conference, Velammal College of Engineering and Technology, Madurai vol.1; issue.1; on 04/05/2014 (2013-14)
  8. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled “Ultrasonic Evaluation of Friction stud welded AA6063/AISI1030 steel joints"(http://www.journals.elsevier.com/materials-and-design/]) in Materials & Design vol.InPress; on 02/05/2014 (2013-14)
  9. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Characterization, Testing and Software Analysis of Al-WC Nano Composites” (http://ijstm.shirazu.ac.ir/) in Iranian Journal of Science and Technology, Transactions of Mechanical Engineering vol.38; issue.M1; page.105-117; on 01/05/2014 (2013-14)
  10. Dr.P.Nagaraj, SrPH/MEC; Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Mechanical Evaluation and Microstructure of Friction welded Aluminium-Mildsteel joints”(http://link.springer.com/article/10.1007%2Fs13369-014-1082-y) in Arabian Journal for Science and Engineering vol.InPress; on 05/04/2014 (2013-14)
  11. Dr.M.K.Marichelvam, AP/MEC; published a paper titled A discrete firefly algorithm for the multi-objective hybrid flowshop scheduling problems DOI: 10.1109/TEVC.2013.2240304 (http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6412790) in IEEE transactions on evolutionary computation vol.18; issue.2; page.301-305; on 01/04/2014 (2013-14)
  12. Dr.T.Prabaharan, P/MEC; published a paper titled “A Discrete Firefly Algorithm for the Multiobjective Hybrid Flowshop scheduling problems” DOI: 10.1109/TEVC.2013.2240304 (http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6412790) in International Journal of IEEE Transactions on Evolutionary Computation, IEEE Inc vol.18; issue.2; page.301-305; on 01/04/2014 (2013-14)
  13. Dr.A.Vasanthanathan, ASP/MEC; published a paper titled "CFRP Aerfoil wing structure-Finite Element Analysis" in 2nd National Conference on Research and Advances in Mechanical Engineering (RAME’14), PSREC vol.1; issue.1; on 28/03/2014 - 29/03 (2013-14)
  14. Dr.A.Azhagurajan, ASP/MEC; published a paper titled “Impact of moisture content for thermal stability of Fireworks Star” in Second National Conference on Research & Advances in Mechanical Engineering RAME -14”, PSREC vol.1; issue.1; on 28/03/2014 - 29/03 (2013-14)
  15. Mr.N.Naganambi, AP/MEC; published a paper titled “Numerical Investigation on Bonded repair for TDS of Helicopter and Characterization of Kevlar/ Epoxy Composite Patch” in International Conference on Advances in Manufacturing and Materials Engineering, NIT Karnataka vol.1; issue.1; on 27/03/2014 - 29/03 (2013-14)
  16. Dr.T.Prabaharan, P/MEC; published a paper titled “Optimization of cutting parameters in machining of polyphenylene Sulphide Composites” in IEEE International Conference on Innovations in Engineering & Technology (ICIET – 14) ,KLN,Madurai vol.1; issue.1; on 21/03/2014 - 22/03 (2013-14)
  17. Dr.T.Prabaharan, P/MEC; published a paper titled “Hybrid flowshop Scheduling using Discrete Harmony Search and Genetic Algorithm”phenylene Sulphide Composites” in IEEE International Conference on Innovations in Engineering & Technology (ICIET – 14) ,KLN,Madurai vol.1; issue.1; on 21/03/2014 - 22/03 (2013-14)
  18. Dr.A.Vasanthanathan, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled “Finite Element Modeling of Isogrid cylindrical shell structures under axial loading using ANSYS Workbench" in National Conference on Micro and Nano Composites – Principle, Manufacturing and Applications (NCMNC-14),TCE Madurai vol.1; issue.1; on 20/03/2014 - 21/03 (2013-14)
  19. Dr.A.Vasanthanathan, ASP/MEC; Dr.P.Nagaraj, SrPH/MEC; published a paper titled “Finite Element Simulation of NITINOL based smart Satellite Structure” in National Conference on Micro and Nano Composites – Principle, Manufacturing and Applications (NCMNC-14),TCE Madurai vol.1; issue.1; on 20/03/2014 - 21/03 (2013-14)
  20. Mr.K.Maheswaran, SrAP/MEC; published a paper titled “Design of Pulsed Electric field (PEF) treatment chamber for microbial inactivation in food” in International Conference on “Advanced Design and Manufacturing”, Sethu Institute of Technology, Kariayapatti vol.1; issue.1; on 17/03/2014 - 18/03 (2013-14)
  21. Dr.T.Prabaharan, P/MEC; published a paper titled “Application of Regression Analysis in Turning operation for optimum surface roughness” in International Conference on “Advanced Design and Manufacturing”, Sethu Institute of Technology, Kariayapatti vol.1; issue.1; on 17/03/2014 - 18/03 (2013-14)
  22. Mr.M.Sankaranarayanan, AP/MEC; published a paper titled “Fabrication and Numerical analysis of semi-rigid polyurethane foam” in International Conference on “Advanced Design and Manufacturing”, Sethu Institute of Technology, Kariayapatti. vol.1; issue.1; on 17/03/2014 (2013-14)
  23. Mr.S.Senthil Murugan, AP/MEC; published a paper titled “Comparative study in primary treatment of tannery effluent using chemical coagulant and Fly ash Based Coagulant” in International conference on “Recent Innovations in Engineering”, Sri Subramaaniya College of Engineering & Technology, Palani vol.1; issue.1; on 13/03/2014 (2013-14)
  24. Mr.S.Senthil Murugan, AP/MEC; published a paper titled “Characterization of Aluminum Metal Matrix hybrid composite using squeeze casting process” in International conference, Holycross Engineering College, Thoothukudi. vol.1; issue.1; on 13/03/2014 (2013-14)
  25. Mr.R.Saravana Sathiya Prabhahar, SrAP/MEC; published a paper titled “Heat transfer enhancement in a square duct with internal ribs” in International Conference on Recent Advances in Mechanical Engineering & Inter disciplinary development, Ponjesley College of Engineering, Nagercoil vol.1; issue.1; on 07/03/2014 - 08/03 (2013-14)
  26. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “ Thermal Analysis on Joining of Dissimilar Metals by Friction Stud Welding” ( ISBN 978-93-80609-17-1) in International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments,PJCE vol.1; issue.1; page.709-711; on 07/03/2014 - 08/03 (2013-14)
  27. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Mathematical Modeling of Friction Plug Welding with preheating effect” (ISBN 978-93-80609-17-1 ) in International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments,PJCE,Nagercoil vol.1; issue.1; page.1518-1521; on 07/03/2014 - 08/03 (2013-14)
  28. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Mathematical Model to Predict Heat Flow in Underwater Friction Stud Welding” (ISBN 978-93-80609-17-1) in International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments,PJCE,Nagercoil vol.1; issue.1; page.1518-1521; on 07/03/2014 - 08/03 (2013-14)
  29. Mr.J.Thanikachalam, SrAP/MEC; published a paper titled "Design and Analysis of Magneto Rheological Fluid Brake" in International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments,PJCE,Nagercoil vol.1; issue.1; on 07/03/2014 - 08/03 (2013-14)
  30. Dr.T.Prabaharan, P/MEC; published a paper titled “Simultaneous scheduling of machines and tools in multi machine flexible manufacturing systems using artificial immune system algorithm”(http://www.tandfonline.com/doi/abs/10.1080/0951192X.2013.834461#.U2N9clMlT1U; DOI:10.1080/0951192X) in International Journal of Computer Integrated Manufacturing vol.27; issue.5; page.401-414; on 01/03/2014 (2013-14)
  31. Dr.T.Prabaharan, P/MEC; published a paper titled “Determination of optimum proportion of water based cutting oil for CNC Machines”(http://www.ripublication.com/Volume/ijemsv4n1.htm) in International Journal of Engineering & Manufacturing Science vol.4; issue.1; page.1-5; on 01/03/2014 (2013-14)
  32. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Experimental studies of thermal transport in heat transfer fluids using infrared thermography”(http://www.ijirset.com/) in International Journal of Innovative research in Science, Engineering and Technology (IJIRSET) vol.3; issue.3; on 01/03/2014 (2013-14)
  33. Dr.T.Prabaharan, P/MEC; published a paper titled “Improved cuckoo search algorithm for hybrid flow shop scheduling problems to minimize makesspan”(http://www.sciencedirect.com/science/article/pii/S1568494614000738; http://dx.doi.org/10.101) in International Journal on Applied soft computing vol.1; issue.19; page.93-101; on 01/03/2014 (2013-14)
  34. Dr.N.Selvakumar, SrP/MEC; Dr.K.Jeyasubramanian, P/NST; published a paper titled "Pani-Magnetic Nanoparticles for EMI Shielding & Corrosion Resistance Application"(http://www.aspbs.com/jnn/) in Journal of NanoScience and NanoTechnology vol.2; issue.1; page.29-33; on 01/03/2014 (2013-14)
  35. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Mechanical Behavior and wear prediction of stir cast AI-TiB2 Composites using response surface methodology” (http://www.sciencedirect.com/science/article/pii/S026130691400171X DOI:10.1016/j.matdes.2014.02.0) in Materials & Design vol.59; issue.7; page.383-396; on 26/02/2014 (2013-14)
  36. Dr.S.P.Asok, SrP/MEC; published a paper titled Safety in Match Works in National Conference on “Advanced in Mechanical Engineering NACAME’14, MSEC vol.1; page.40-46; on 21/02/2014 (2013-14)
  37. Dr.S.P.Asok, SrP/MEC; published a paper titled “Studies on Backdraft Fire Suppression in Buildings” in National Conference on “Advanced in Mechanical Engineering NACAME’14, MSEC vol.1; page.219-225 ; on 21/02/2014 (2013-14)
  38. Mr.S.Senthil Murugan, AP/MEC; published a paper titled “Comparative Analysis of Aluminium Sulphate Coagulant with Fly Ash Based Coagulant in Industrial Liquid Effluent Treatment” in National Conference on “Advancement in Mechanical Engineering NACAME’14 vol.1; issue.1; on 21/02/2014 (2013-14)
  39. Mr.S.Senthil Murugan, AP/MEC; published a paper titled “Fabrication and Characterization of Al-Sicp-Fly ash Composite using Stir Casting Process” in National Conference on “Advancement in Mechanical Engineering NACAME’14 vol.1; issue.1; on 21/02/2014 (2013-14)
  40. Mr.M.Sankaranarayanan, AP/MEC; published a paper titled “Impact Analysis of Semi Rigid Polyurethane Foam Using Ls-Dyna” in National Conference on “Advancement in Mechanical Engineering NACAME’14 vol.1; issue.1; on 21/02/2014 (2013-14)
  41. Mr.M.Sankaranarayanan, AP/MEC; published a paper titled “Testing and Comparing Moringa Oleifera (PKM1) Seed Coagulant and Chemical Coagulants in Decontamination of Municipal Water” in National Conference on “Advancement in Mechanical Engineering NACAME’14 vol.1; issue.1; on 21/02/2014 (2013-14)
  42. Dr.R.Rajkumar, P/MEC; published a paper titled “Fabrication&Testing of Sprocket Using Hobbing and Stamping Process" in National Conference on “Advancement in Mechanical Engineering NACAME’14 ,MSEC vol.1; issue.1; on 21/02/2014 (2013-14)
  43. Dr.R.Rajkumar, P/MEC; published a paper titled “Numerical Investigation of Composite Guardrail” in National Conference on “Advancement in Mechanical Engineering NACAME’14 ,MSEC vol.1; issue.1; on 21/02/2014 (2013-14)
  44. Dr.R.Rajkumar, P/MEC; published a paper titled “Minimizing Make span for Scheduling Job Shop with ABC Algorithm” in National Conference on “Advancement in Mechanical Engineering NACAME’14 ,MSEC vol.1; issue.1; on 21/02/2014 (2013-14)
  45. Dr.A.Vasanthanathan, ASP/MEC; published a paper titled “Finite Element Modeling of CFRP Composite Cylindrical Shell" in National Conference on “Advancement in Mechanical Engineering NACAME’14,MSEC vol.1; issue.1; on 21/02/2014 (2013-14)
  46. Dr.A.Vasanthanathan, ASP/MEC; published a paper titled “Review of Deployable Satellite Structure using Shape Memory Alloy” in National Conference on “Advancement in Mechanical Engineering NACAME’14,MSEC vol.1; issue.1; on 21/02/2014 (2013-14)
  47. Mr.R.Saravana Sathiya Prabhahar, SrAP/MEC; published a paper titled “Experimental & Numerical investigation of Heat transfer characteristics in a square duct with internal ribs” in National Conference on “Advancement in Mechanical Engineering NACAME’14,MSEC vol.1; issue.1; on 21/02/2014 (2013-14)
  48. Mr.R.Saravana Sathiya Prabhahar, SrAP/MEC; published a paper titled “Design & development of two stage down draft gasifier” in National Conference on “Advancement in Mechanical Engineering NACAME’14,MSEC vol.1; issue.1; on 21/02/2014 (2013-14)
  49. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Thermal Analysis of Friction Stud Welded AA 6063 / AISI 304 Joints” in National Conference on" Advances in Mechanical Engineering”NACAME’14, MSEC vol.1; issue.1; page.397-400; on 21/02/2014 (2013-14)
  50. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Numerical Modelling of Friction Plug Welding Using ANSYS” in National Conference on" Advances in Mechanical Engineering”NACAME’14, MSEC vol.1; issue.1; page.389-392; on 21/02/2014 (2013-14)
  51. Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; published a paper titled “Modeling of Friction Stud Welding of Dissimilar Metals Using ABAQUS” in National Conference on" Advances in Mechanical Engineering”NACAME’14, MSEC vol.1; issue.1; page.261-264; on 21/02/2014 (2013-14)
  52. Dr.M.K.Marichelvam, AP/MEC; published a paper titled "Improved cuckoo search algorithm for hybrid flow shop scheduling problems to minimize makespan" DOI: 10.1016/j.asoc.2014.02.005 (http://www.sciencedirect.com/science/article/pii/S1568494614000738) in Applied Soft Computing vol.19; page.93-101; on 13/02/2014 (2013-14)
  53. Mr.R.Saravana Sathiya Prabhahar, SrAP/MEC; published a paper titled “Numerical Investigation of Heat Transfer characteristics in a square duct with internal ribs”(http://www.ijirset.com/) in International Journal of Innovative Research in Science, Engineering & Technology vol.3; issue.Special ; on 10/02/2014 - 11/02 (2013-14)
  54. Mr.S.Senthil Murugan, AP/MEC; published a paper titled "Fabrication and Characterisation of Al-SiCp Fly Ash Composite Using Stir Casting Process" in International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments, Ponjesly College of Engineering, Nagarcoil vol.1; issue.1; on 07/02/2014 - 08/02 (2013-14)
  55. Dr.P.Nagaraj, SrPH/MEC; Dr.N.Rajesh Jesudoss Hynes, ASP/MEC; Mr.C.A.K.Arumugam, AP/MEC; published a paper titled "Numerical simulation of heat flow in Friction Stud Welding of dissimilar metals"(http://link.springer.com/article/10.1007%2Fs13369-013-0932-3) in Arabian Journal for Science and Engineering vol.InPress; on 01/02/2014 (2013-14)
  56. Dr.N.Bose, SrP/MEC; published a paper titled “Enhancing corporate Creativity of Technologists”([http://www.ijirset.com/upload/2014/january/24_Enhancing.pdf]) in International Journal of Innovative Research in Science, Engineering and Technology [IJIRSET] vol.3; issue.1; on 15/01/2014 (2013-14)
  57. Dr.R.Rajkumar, P/MEC; published a paper titled “An artificial Bee colony algorithm for Job Shop Scheduling problem” in International Conference on Advances in Industrial Engineering Applications (ICAIEA2014), CEG,Anna University,Chennai vol.1; issue.1; on 06/01/2014 - 08/01 (2013-14)
  58. Dr.R.Rajkumar, P/MEC; published a paper titled “Multi – objective optimization Model for Enhancing the thermal and mechanical properties of Carbon polymer matrix Composite” in International Conference on Advances in Industrial Engineering Applications (ICAIEA2014), CEG,Anna University,Chennai vol.1; issue.1; on 06/01/2014 - 08/01 (2013-14)
  59. Dr.T.Prabaharan, P/MEC; published a paper titled “Performance evaluation of an Improved Hybrid Genetic Scatter Search (IHGSS) algorithm for multi stage hybrid flow shop scheduling problem with missing operations",DOI 10.1504/IJISE.2014.057946([http://www.inderscience.com/jhome.php?jcode=ijise]) in International Journal of Industrial & Systems Engineering (IJISE) vol.16; issue.1; page.120-141; on 01/01/2014 (2013-14)
  60. Dr.M.K.Marichelvam, AP/MEC; published a paper titled "Performance evaluation of an improved hybrid genetic scatter search (IHGSS) algorithm for multistage hybrid flow shop scheduling problems with missing operations",DOI 10.1504/IJISE.2014.057946(https://www.deepdyve.com/lp/inderscience-publishers/performance-evaluation-of-an-improved-hybrid-gen) in International Journal of Industrial and Systems Engineering, vol.16; issue.1; page.120-141; on 01/01/2014 (2013-14)
  61. Mrs.V.S.Benitha, SrAP/NST; Dr.K.Jeyasubramanian, P/NST; published a paper titled “Rapid Biosynthesis of Antibacterial Silver Nanoparticle by Rhizophora microalga leaf”(http://www.aspbs.com/asem.html) in Advanced Science Engineering and Medicine(ASEM) vol.6; page.1-4; on 03/12/2013 (2013-14)
  62. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Forming Limit Diagram and void coalescence analysis of AA5052 coated with Molybdenum based ceramic nanocomposites” (http://www.journals.elsevier.com/materials-and-design/) in Materials & Design vol.52; issue.12; page.393-403; on 02/12/2013 (2013-14)
  63. Dr.A.Azhagurajan, ASP/MEC; published a paper titled "Vehicle over speed control for different zones with Automatic Mobile phone answering system using IVRS" in International Journal of Science and Socres vol.1; issue.1; on 01/12/2013 (2013-14)
  64. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Electrical resistivity, wear map and modeling of extruded tungsten reinforced copper composite”(http://www.journals.elsevier.com/materials-and-design/) in Materials and Design vol.56; issue.4; page.791-806; on 29/11/2013 (2013-14)
  65. Dr.R.Maheswaran, SrP/MEC; Dr.A.Vasanthanathan, ASP/MEC; published a paper titled “Numerical Analysis of Fractured Femur bone with prosthetic bone plates”(http://www.journals.elsevier.com/procedia-engineering/) in Procedia Engineering vol.64; page.1242-1251; on 16/11/2013 (2013-14)
  66. Dr.N.Selvakumar, SrP/MEC; published a paper titled “Numerical Modeling on Corrosion Behavior of Molybdenum Based Ceramic Nano composite Coated Mild Steel Using Response surface methodology” (http://www.inderscience.com/jhome.php?jcode=ijsurfse) in International Journal of Surface Science and Engineering vol.InPress; on 04/11/2013 (2013-14)
  67. Dr.N.Selvakumar, SrP/MEC; Dr.K.Jeyasubramanian, P/NST; published a paper titled “Investigation on the Electrical Properties of Polymer Metal Nano composites for Physiological Sensing Applications” (http://www.journals.elsevier.com/physics-procedia/) in Physics Procedia vol.49; issue.10; page.69-78; on 01/11/2013 (2013-14)
  68. Dr.K.Jeyasubramanian, P/NST; published a paper titled “Magnetic flux alignment studies on Entrapped Ferrofluid Nano particles in polyvinyl alcohol matrix”(https://www.elsevier.com/journals/journal-of-materials-science-and-technology/1005-0302) in Journal of Material Science & Technology vol.29; issue.10; page.903-908; on 30/10/2013 (2013-14)
  69. Dr.P.Nagaraj, SrPH/MEC; Dr.A.Vasanthanathan, ASP/MEC; published a paper titled “On the Fabrication of carbon fabric reinforced epoxy composite shell without joints and wrinkling”([http://technopress.kaist.ac.kr/?journal=scs]) in Steel and Composite Structures(SCS) vol.15; issue.3; page.267-279; on 16/09/2013 (2013-14)
  70. Dr.T.Prabaharan, P/MEC; published a paper titled “Solving Hybrid flow shop scheduling problems using BAT algorithm”([http://www.inderscience.com/jhome.php?jcode=ijleg]) in International Journal of Logistics, Economics and Globalization vol.5; issue.1; page.15-29; on 07/09/2013 (2013-14)
  71. Dr.B.Gnana Sundara Jayaraja, ; published a paper titled “Characterization Testing and software Analysis of Al-Wc composite" in Iranian Journal of Science and Technology, IJSTM page.InPress; on 25/07/2013 (2013-14)
  72. Mr.K.Maheswaran, SrAP/MEC; published a paper titled “A Novel Approach for prioutization of failure modes in FMEA using MCDM” ([http://www.ijera.com/]) in International Journal of Engineering Research and Applications (IJERA) vol.3; issue.4; page.733-739; on 13/07/2013 (2013-14)
  73. Dr.N.Bose, SrP/MEC; published a paper titled “Performance evaluation and exhaust emission analysis of a CI Engine fuelled with pongamia pinnate biodiesel and its blends” ([http://www.sciknow.org/journals/show/id/ojamr]) in The Journal of Advanced Materials Research vol.768; page.15--157; on 11/07/2013 (2013-14)[/tabs}
B.E Mechanical
2000-2004 Batch
B.E Mechanical
2001-2005 Batch
B.E Mechanical
2002-2006 Batch
B.E Mechanical
2003-2007 Batch
B.E Mechanical
2004-2008 Batch
B.E Mechanical
2005-2009 Batch
B.E Mechanical
2006-2010 Batch
B.E Mechanical
2007-2011 Batch
B.E Mechanical
2008-2012 Batch
B.E Mechanical
2009-2013 Batch
B.E Mechanical
2010-2014 Batch
B.E Mechanical
2011-2015 Batch