RESEARCH CENTRE

Department of Mechanical Engineering is approved Research Centre under Anna University, Chennai from the academic year 2006-2007.

No. of Scholars Completed Ph.D.: 35

No. of Scholars Pursuing Ph.D.: 46

 

Ph.D. Awarded

Scholars Completed their Ph.D.

  1. Dr.S.Sambath, (Reg. No 2006289109.) under the guidance of Dr.P.Nagaraj with the title “Weldment Defect Detection & Classification in Ultrasonic Testing Using Artificial Intelligence” during 2010.
  2. Dr. R.Palanichamy, (Reg. No. 2006589102) under the guidance of Dr.P.Nagaraj with the title “Weldment Defect Detection & Classification in Ultrasonic Testing Using Artificial Intelligence” during 2010.
  3. Mr.A.Azhagurajan, (Reg. No. 2009720106) under the guidance of Dr.N.Selvakumar with the title “Experimental Analysis on Nano Scale Flash Powder in Cake Bomb Fire Crackers” during 2012.
  4. Mr.C.Kailasanathan, (Reg. No. 2007289123) under the guidance of Dr.N.Selvakumar with the title “Experimentation on Mechanical Behaviour of Ceramic Reinforced Nanohydroxyapatite-Gelatin Composites For Bone Grafting” during 2012.
  5. G.Natrajan, (Reg. No. 2006289703) under the guidance of Dr.N.Bose with the title “Numerical & Experimental Flow Field Analysis inside a Supersonic Diffuser” during
    2013.
  6. Ms.M.Sumathi, (Reg. No. 2006289110) under the guidance of Dr.N.Selvakumar with the title “Studies on densification and strain hardening behaviour of cu-sic preforms during cold upsetting” during 2013.
  7. Mr.A.P.Mohanraj, (Reg. No. 2007289141) under the guidance of Dr.N.Selvakumar with the title “Workability and Deformation Behaviour of Carbon Manganese Sintered P/M Steel” during 2013.
  8. Mr.S.C.Vettivel, (Reg. No. 2009720102) under the guidance of Dr.N.Selvakumar with the title “Experimental Analysis on Wear Behaviour of Sintered Tungsten Reinforced Copper Nano Composite” during 2013.
  9. Mr.B.Gnanasundarajayaraja, (Reg. No. 2009720105) under the guidance of Dr.N.Selvakumar with the title “Analysis of mechanical behaviour of aluminium based tungsten carbide Nano composites” during 2013.
  10. A.Vasanthanathan, (Reg. No 9894781354) under the guidance of Dr.P.Nagaraj with the title “Investigation on Carbon-Fabric Reinforced Epoxy Composite Shells under Axial Impact” during 2014.
  11. N.Rajesh Jesudoss Hynes, (Reg. No. 2010720111) under the guidance of Dr.P.Nagaraj with the title “Investigation on joining of Dissimilar materials in a newly developed low cost friction stud welding machine”, during 2014.
  12. Mr.M.Jinnah Shelk Mohamed, (Reg. No. 2009720110) under the guidance of Dr.N.Selvakumar with the title “Experimental Analysis on Formability Behaviour of Aa5052 Coated with Molybdenum Based Ceramic Nano composite” during 2014.
  13. G.Antony Miraculas, (Reg. No. 2009720114) under the guidance of Dr.N.Bose with the title “Optimisation of process parameters for Biodiesel extraction from Tamanu oil using Design of Experiments” during 2015.
  14. M.K.Marichelvam, (Reg. No. 2007289153) under the guidance of Dr.T.Prabaharan with the title “Bio-inspired meta-heuristic algorithms for hybrid flow shop scheduling problems” during 2015.
  15. S.Jeyakannan, (Reg. No. 2007289120) under the guidance of Dr.T.Prabaharan with the title “Scheduling optimisation in textile industry” during 2015.
  16. P.Raja Mohamed Rabi, (Reg. No. 12182897391) under the guidance of Dr.P.Nagaraj with the title “Finite Element Model Updating Based on Experimental Result” during 2016.
  17. I.Balasubramaniam, (Reg.No. 2011120101) under the guidance of Dr.R.Maheswaran with the title “Non Traditional Optimisation of Maching Paromelery Composites” during 2016.
  18. P.Peter Anand Kumar, (Reg.No. 1214289785) under the guidance of Dr.R.Maheswaran with the title “Optimisation algorithm to improve complex assembly” during 2016.
  19. Anselm.W.A.Lenin, (Reg. No. 20117201033) under the guidance of Dr.P.Nagaraj with the title “Experimental Investigation on Al 7020 FSW Joints with Interlayer” during 2017.
  20. M.Nandakumar, (Reg. No. 2011720036) under the guidance of Dr.N.Bose with the title “Green Printing - Environmental Management in Offset Printing” during 2017.
  21. J.Sunil, (Reg. No. 1314289778) under the guidance of Dr.R.Maheswaran, with the title “Study of oil carrying capacity of Nano fluids in worm & worm wheel” during 2017.
  22. M.Sivaraj, (Reg. No. 1214289125) under the guidance of Dr.N.Selvakumar with the title “Experimental Analysis on Al-TiC sintered Nano Composites” during 2017.
  23. R.Harichandran, (Reg.No.1313289133) under the guidance of Dr.N.Selvakumar with the title “Investigation on the Mechanical Behaviour of Cu-Cnt-Bnnt Hybrid Composites” during 2017.
  24. K.Gangatharan, (Reg. No. 1414289167) under the guidance of Dr.N.Selvakumar with the title “Development of Sintered Titanium Based Hybrid Composites with Nano Dispersed Boron Carbide” during 2017.
  25. T.Ramkumar, (Reg. No. 1414289142) under the guidance of Dr.N.Selvakumar with the title “Development of Sintered Titanium Based Hybrid Composites with Nano Dispersed Boron Carbide” during 2017.
  26. P.Narayanasamy, (Reg. No. 1414289135) under the guidance of Dr.N.Selvakumar with the title “Hybridizing Tungsten Carbide with Aluminium to Enhance the Mechanical Response of Magnesium Based Nano Composites” during 2017.   
  27. Mr.A.Muthiah, (Reg. No. 2011120111) under the guidance of Dr. R. Rajkumar with the title “Manufacturing Scheduling” during 2017.
  28. R. Malkiya Rasalin Prince, (Reg. No. 1214289115) under the guidance of Dr.N.Selvakumar with the title “Experimental Analysis on Al-Tic Sintered Nano Composites” during 2018.
  29. S.Christopher Ezhil Singh, (Reg.No.1414289725) under the guidance of Dr.N.Selvakumar with the title “Experimentation on (ZrC/B4C) Nano particle reinforced with Cu-Cr matrix composite” during 2018.
  30. Mr. A.Manikandan, (Reg. No. 1214289703) under the guidance of Dr. R. Rajkumar with the title “Prediction of Mechanical properties of polymer composite with ANN” during 2018.
  31. Mr. R.B.Jeen Robert, (Reg. No. 1214289763) under the guidance of Dr. R. Rajkumar with the title “Improved Meta-Heuristic techniques to solve Flowshop Scheduling Problems” during 2018.
  32. Mr.N.Vijay Ponraj, (Reg. No:1414289126) under the guidance of    Dr.A.Azhagurajan   with the title “Processing, Characterization and Experimental Investigation of Mechanical and Wear Behaviour of Graphene Nanosheet reinforced sintered Copper composite” from 2018.
  33. Mr.K.Vinukumar, (Reg. No. 1414289107) under the guidance of Dr.A.Azhagurajan with the title “Optimization of biodiesel blended with Nano particles in IC engine to reduce the pollutants” from 2018.
  34. Mr. R.Kumar, (Reg. No. 1614289128) under the guidance of Dr.N.Rajesh Jesudoss Hynes with the title “Experimental and Numerical simulation of thermal drilling process” during 2018.
  35. Mr. P.Shenbaga Velu, (Reg. No. 1514289929) under the guidance of Dr.N.Rajesh Jesudoss Hynes with the title “Experimental and numerical simulation of friction welding of Aluminium -Titanium Joints” during 2018.

Ph.D. Pursuing

Scholars pursuing their Ph.D.

  1. Mr.J.Thanikachalam, (Reg. No. 20117201017) under the guidance of Dr.P.Nagaraj in with the title “Development and Performance Analysis of an MR Brake” from 2011.
  2. Mr.N.Vasiraja, (Reg. No. 20117201016) under the guidance of Dr.P.Nagaraj with the title “Experimental & Numerical studies on functionally graded material plate under thermal load” from 2011.
  3. Mr.D.Palanikumar, (Reg. No. 20117201004) under the guidance of Dr.N.Bose with the title “Evaluation of surface roughness using Machine vision system” from 2011.
  4. Mr. B.Saravanan, (Reg. No. 20117201037) under the guidance of Dr.T.Prabaharan with the title “Cost Optimization of Maintenance Schedule for Repairable System” from 2011.
  5. Mr.R.Rajavel, (Reg. No. 1414289172/PhD/AR10) under the guidance of DR.N.Bose in IC with the title “Design & Fabrication of a Diesel Particulate Filter” from 2013.
  6. Mr.V.Srinivasan, (Reg. No. 1314589724/PhD/AR8) under the guidance of Dr.R.Maheswaran with the title “Analytical studies of mechanical behaviour of textile fabrics” from 2013.
  7. Mrs.J.Pandiselvi, (Reg. No. 1324489733/PhD/AR12) under the guidance of Dr.R.Maheswaran with the title “Process MRI sequent optimization algorithm” 2013.
  8. Mr.M.Anandhan, (Reg. No. 1314289176/PhD/AR10) under the guidance of Dr.T.Prabaharan with the title “Investigations for reduced health hazards and environmental impacts on extraction and application of natural dyes.” from 2013.
  9. Mr.Brabin Nivas, (Reg. No. 1314289171/PhD/AR10) under the guidance of Dr.T.Prabaharan with the title “Multi-Objective Hybrid Flowshop Scheduling Problems” from 2013.
  10. Mr. S.Senthil Ganesh, (Reg. No. 1413289137) under the guidance of Dr. R. Rajkumar with the title “Microstructure, Mechanical and Tribological behaviour of B4C and ZrC reinforced Al-7068 hybrid composite produced by Stir Casting Technique” from 2013.
  11. Mr. N.Gnana Prasanna, (Reg. No. 1414289162) under the guidance of Dr. R. Rajkumar with the title “Microstructure, Mechanical and Tribological behaviour of B4C and ZrC reinforced Al-7068 hybrid composite produced by Stir Casting Technique” from 2013.
  12. Mr.R.Saravana Sathiya Prabhahar, (Reg. No. 1414289770) under the guidance of Dr.P.Nagaraj with the title “Experimental Investigation of syngas production with steam gasification in the presence of Nano metallic/Metallic Oxide Particles as Catalyst” from 2014.
  13. Mr.S.Pradeep Kumar, (Reg. No. 1515289164 29-12-2014) under the guidance of Dr.P.Nagaraj with the title “Vibration Analysis of Mechanical Structures via Sub Structuring Techniques” from 2014.
  14. Mr.P.Jacob Annaraj, (Reg. No. 1514289252) under the guidance of DR.N.Bose with the title “"Development of mathematical model for surface roughness in abrasive water jet machining of particle reinforced metal matrix composites” from 2014.
  15. Mr.A.Sivasubramanian, (Reg. No. 1515289162) under the guidance of Dr.R.Maheswaran with the title “The study of lubrication effect on Cold Forging” from 2014.
  16. Mr. I.Vimal Kannan, (Reg. No. 1413289740) under the guidance of Dr. R. Rajkumar with the title “Investigations on crush behaviour of thin walled metal honeycombs hexagonal structure under quasi static loading” from 2014.
  17. Mr.A.Perumal, (Reg. No. 1413289739) under the guidance of Dr.A.Azhagurajan with the title “Perdiction of EDM parameter on alpha-beta Ti – 6Al-2Sn-4Zr-2Mo alloy using grey relational algorithm” from 2014.
  18. Mr.S.Arockia Reemas, (Reg. No. 1514289734) under the guidance of Dr.R.Maheswaran with the title “Hydrophobic Nano Particles filled & Epoxy Composite Coatings” from 2015.
  19. Mr.G.Shunmuga Bharathi, (Reg. No. 1514289809) under the guidance of Dr.T.Prabaharan with the title “Characterization on Electroless Ni-P/Tio2 Nano Composite Coatings” from 2015.
  20. Mr. K.Maheswaran, (Reg. No. 1514289709) under the guidance of Dr.T.Prabaharan with the title “Analysing the Hazardous Emissions from Incineration process and Mitigating the effect on Environment” from 2015.
  21. Mr. M. Vivek Prabhu, (Reg. No. 1512289881) under the guidance of Dr.N.Rajesh Jesudoss Hynes with the title “Joining of Metal Matrix Composite Fasteners by Portable Friction Stud welding Machine” from 2015.
  22. Mr. R. Dinagaran, (Reg. No. 16142897316) under the guidance of Dr.R.Maheswaran with the title “A study of Tribological Behaviour of Hydraulic System in Marine Environment” from 2016.
  23. Mr. G.Karthik Pandiyan, (Reg. No. 17122891232/Ph.D/AR10) under the guidance of Dr.T.Prabaharan with the title “Enhancing Machining Property of Titanium Alloy Steel Using Cryogenic Treatment” from 2016.
  24. Mr.N. Naganambi, (Reg. No. 17142791243) under the guidance of Dr.N.Selvakumar with the title “Microstructure, Mechanical and Tribological behaviour of B4C and ZrC reinforced Al-7068 hybrid composite produced by Stir Casting Technique” from 2016.
  25. Mr.N. M.Sankaranarayanan, (Reg. No. 17122791254) under the guidance of Dr. R. Rajkumar with the title “Fabrication and Characterization of Coir/Luffa Fibre Reinforced Hybrid Natural Composite Materials” from 2016.
  26. Mr. C.A.K.Arumugam, (Reg.No: 17142891250) under the guidance of Dr. R. Rajkumar with the title “Design and Development of Honeycomb sandwich structure” from 2016.
  27. Mr. N.J.Vignesh, (Reg. No. 1614289113) under the guidance of Dr.N.Rajesh Jesudoss Hynes with the title “Friction Self-Piercing Riveting of LIGHT WEIGHT multi material Structures” from 2016.
  28. Mr. Mr.R.Meby Selvaraj, (Reg. No. 16142897133) under the guidance of Dr.N.Rajesh Jesudoss Hynes with the title “Friction welding of dissimilar materials” from 2016.
  29. Mr. Packiaraj, (Reg. No. 18142891146) under the guidance of Dr.N.Rajesh Jesudoss Hynes with the title “Characterisation and Mechanical Evaluation of Friction Welded Joints made of Ultra high speed steel” from 2016.
  30. Mr. C.Naveen Kumar, (Reg. No. 16142897129/PhD/AR10) under the guidance of Dr.A.Vasanthanathan with the title “Experimental and Finite Element investigations of optimal design of Honeycomb Composite Structures” from 2016.
  31. Mr. J.Jerold John Brito, (Reg. No. 16142897127) under the guidance of Dr.A.Vasanthanathan with the title “Structural Health Monitoring of Carbon Fabric Reinforced Composite Structure” from 2016.
  32. J.Nagarajan, (Reg. No. 17152897260) under the guidance of Dr.N.Bose in IC engines with the title “Performance, Combustion and Emission characteristics in a Diesel engine Using Bio Fuels with additives” from 2017.
  33. C.Uthranarayan, (Reg. No. 17142897367) under the guidance of Dr.R.Maheswaran with the title “Hybrid Heuristic Algorithms for Combinatorial Optimization” from 2017.
  34. Mr. J.Jabinth, (Reg. No. 18142891229) under the guidance of Dr.N.Selvakumar with the title “Mechanical analysis of Cu-W, Cu-B4C and Cu-TiC alloys for wear resistive, non-corrosive and electrical applications” from 2017.
  35. Mr.B.Vijayaragavan, (Reg. No. 17142897228) under the guidance of Dr.S.P.Asok with the title “Investigations on flow and heat transfer characteristics of air flow through straight, inclined and stepped labyrinth seals” from 2017.
  36. Mr.S.Lionel Benesten, (Reg. No. 18142891190) under the guidance of Dr.S.P.Asok with the title “Investigation on eco-friendly and safer fireworks and match works composites” from 2017.
  37. Mr. S.Raja, (Reg. No. 17142897277) under the guidance of Dr.N.Rajesh Jesudoss Hynes with the title “Friction stud welding of Magnesium matrix composites in fluid environment for automotive applications” from 2017.
  38. Mr. Shankaranarayanan, (Reg. No. 18142891146) under the guidance of Dr.N.Rajesh Jesudoss Hynes with the title “Friction Riveting of Thermo polymers to metal for hybrid structural applications” from 2017.
  39. Mr. G.Manikanda Raja, (Reg. No. 17142891147) under the guidance of Dr.A.Vasanthanathan with the title “Development of graphene enabled polymer composite structures” from 2017.
  40. Mr. P.S.R.SenthilMaharaj, (Reg. No. 17142897131) under the guidance of Dr.A.Vasanthanathan with the title “Experimental and Finite Element Investigations on Bio-Materials Enabled Prosthetic Implants” from 2017.
  41. Mr. K.Chellamuthu, (Reg. No. 17142897125) under the guidance of Dr.A.Vasanthanathan with the title “Experimental and FE investigations of HFRP tubular structure” from 2017.
  42. Mr. P.John Prathap Singh, (Reg. No. 18142891146) under the guidance of Dr.A.Vasanthanathan with the title “Experimental and Finite element Modelling of Self-Healing Composites Structures” from 2017.
  43. Mr. Priyansukumarsingh, (Reg. No. 18192891111/PhD/AR9) under the guidance of Dr.R.Maheswaran with the title “Productivity Enhancement in Indian SMEs using Work study Techniques” from 2018.
  44. Mr.P.Balamurugan, (Reg. No. 17142791243) under the guidance of Dr.N.Selvakumar with the title “Microstructure, Mechanical and Tribological behaviour of B4C and ZrC reinforced Al-7068 hybrid composite produced by Stir Casting Technique” from 2018.
  45. Mr. L. Prakash, (Reg. No. 18142897119) under the guidance of Dr.A.Azhagurajan with the title “Experimentation on Boron blended fireworks composition to make safe fireworks” from 2018.
  46. Mr. Inbanaathan.P.V, (Reg. No. 19142891115/Ph.D./AR9) under the guidance of Dr. B.Dhinesh with the title “Experimental Investigation of Performance, Combustion and Emission Characteristics of a Direct Injection Diesel Engine Fuelled with Biodiesel and Pode/Biodiesel Fuel Blends” from 2018.
B.E Mechanical
2000-2004 Batch
B.E Mechanical
2001-2005 Batch
B.E Mechanical
2002-2006 Batch
B.E Mechanical
2003-2007 Batch
B.E Mechanical
2004-2008 Batch
B.E Mechanical
2005-2009 Batch
B.E Mechanical
2006-2010 Batch
B.E Mechanical
2007-2011 Batch
B.E Mechanical
2008-2012 Batch
B.E Mechanical
2009-2013 Batch
B.E Mechanical
2010-2014 Batch
B.E Mechanical
2011-2015 Batch